AZZARO LF6377 Headphones User Guide

: September 6, 2024
: AZZARO

Table of Contents

AZZARO LF6377 Headphones
Product specifications:
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

AZZARO LF6377 Headphones

Please read the instructions before using the headset.

THE OBJECTS IN THE BOX

Wireless Headphones
USB Type C Charging Cable

BUTTON ICON :

Previous/Volume down
Power On/Off
Next/Volume up
Indicator light
Charging
Aux in
Mic

Power switch:

Long press to turn on / off, or reject the incoming phone call.
Short press to play/pause when music playing or answer/end the phone call.
Press twice to redial the last phone call.
Press 3 times to activate the voice assistant.

Please note: Not all mobile phones support all the functions listed above. Please refer to your cell phone’s user’s manual for further information.

Wireless music mode:

Short press + to play the next song.
Short press – to play the previous song.
Long press – to volume down.
Long press + to volume up.

Mobile Phone / Device Connection:

Step 1: Open the Bluetooth setting on your phone/device and click “Search Device”. Some devices will search for available Bluetooth automatically.
Step 2: Search for Bluetooth devices until you see “AZZARO HEADPHONES”. Select “AZZARO HEADPHONES” to pair the connection.
Step 3: The indicator light on the headphone will flicker blue and red while pairing. Your device will indicate when the pairing is successful and the indicator light will stop flickering.

Charging :
Please make sure the product is fully charged before the first use. Charge the product with the provided USB cable which is compatible with any computer or other 5V output charger. The charge Bluetooth Indicator will be in red while charging, then when the battery is fully charged it will turn off.

Product specifications:

Bluetooth solution: V5.4
Support A2DP, AVRCP, HSP, and HFP prof ile

Driver unit: 40mm
Impedance:16 ohms
Sensitivity: 100dB ± 3dB
Max. input power: 20mW
Frequency response: 20Hz-20kHz
Frequency: 2402-2480MHz
EIRP Power: -11.20 dBm

Features :

Working distance: 10M
Built-in rechargeable battery: 3.7V, 200mAh
Playing time: up to 8 hours
Phone talk: up to 8 hours
Charging time: 1.5~2.0 hours
Stand-by time: up to 15 days

TIPS:

This product is not a toy.
When using for the first time, charging for more than 1-2 hours is good for battery.
Please charge the product if the product hasn’t been used for a long time (more than one month).
Please keep away from fire and water.
To prevent possible hearing damage, do not listen at high volume levels for long periods. Do not use the headset while driving or cycling or in any situation where you should be able to hear other sounds. As a guide to set the volume level, check that you can still hear your own voice, when speaking normally while listening with the headset.

Importer:
Manufactured by: ADM group
www.admgroup.com
Made in China

CAUTION
Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. Battery cannot be subjected to high or low extreme temperatures, low air pressure at high altitude during use, storage or transportation. Replacement of a battery with an incorrect type that can result in an explosion or the leakage of flammable liquid or gas. Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion. Leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas. A battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas.

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:

This device may not cause interference.
This device must accept any interference, including interference that may cause undesired operation of the device.

Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
FCC ID: 2AXWJ-LF6377
IC: 26678-LF6377

Specifications

Model No.: LF6377
Operating ambient temperature: 0 – 40°C,
Storage and transportation ambient temperature: -10 – 50°C, altitude not higher than 2000m (air pressure not less than 80kPa),

WARNING:

replacement of a battery with an incorrect type may defeat a safeguard;
disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, may result in an explosion;
leaving a battery in an extremely high temperature surrounding environment, such as sunshine, fire, or hot surface may result in an explosion or the leakage of flammable liquid or gas;
a battery subjected to extremely low air pressure may result in an explosion or the leakage of flammable liquid or gas.

CAUTION
Risk of fire or explosion if the battery is replaced by an incorrect type!