Pet Hair Eraser® Upright Vacuum Cleaning Filters | Support
- June 7, 2024
- Bissell
Table of Contents
Maintaining your filters is very important to the function of your vacuum
The steps below provide instruction on how to clean and maintain your Dirt Tank and Filters
- If you are experiencing issues with reduced suction you’ll want to follow the complete list of steps before continuing > Go to No Suction
These steps are considered a part of routine maintenance
-
Remove & empty Dirt Tank
-
Empty the Dirt Tank over a trash bin by pressing the Tank Empty Button on the lower front of the Tank
-
Release the Separator by twisting to the left to disconnect & remove
- Clean Separator of all debris
- Separator can be rinsed > Allow to completely air dry (24 – 48 hours) before reinstalling
-
Remove all Filters
-
Open the Tank Lid > Lift the release latch on the front
- Remove Filter and clear debris (machine should not be used without Filters installed)
- Filters can be washed in warm water with mild dish soap > Allow to completely air dry (24 – 48 hours) before reinstalling
-
Remove the Post Motor Filter
- Lift tab to open and twist Filter counter-clockwise to remove
- Filters can be washed in warm water with mild dish soap > Allow to completely air dry (24 – 48 hours) before reinstalling
-
For replacement Filters > Go to Parts & Supplies
-
If you were having suction issues and the steps above did not resolve > Go to Brush Not Turning
-
Recipient Email
Your Email
Your Name
Was this answer helpful?
Yes
No
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>