Westfalia 60 16 56 PIR Solar Wall Light Instruction Manual

: June 13, 2024
: Westfalia

Table of Contents

Westfalia 60 16 56 PIR Solar Wall Light
Product Information
Product Usage Instructions
Installation
SAFETY NOTES
OPERATION
Assembly and commissioning
Technical data
EU DECLARATION OF CONFORMITY
DISPOSAL
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Westfalia 60 16 56 PIR Solar Wall Light

Product Information

Product Name: PIR Solar-Wandleuchte – 2er Set (PIR Solar Wall Light – 2 pcs)
Model Number: Art. 60 16 56
Languages: DE, EN, FR, NL, IT

Product Usage Instructions

Battery Installation:
- English: Unscrew the battery compartment and insert the batteries with the correct polarity.
- Dutch: Schroef het batterijvak los en plaats de batterijen met de juiste polariteit.
- German: Schrauben Sie das Akkufach und den Boden wieder zu. Schalten Sie die Leuchte ein.
- Italian: Riavvitare il vano batteria e il fondo. Accendi la luce.
Battery Compartment and Light Activation:
- English: Screw the battery compartment and the bottom back on. Turn the light on.
Safety Precautions:
- The product is not a toy. Keep children away from it.
- Do not expose the product to extreme temperatures, strong vibrations, or short circuits.
- Only use rechargeable batteries.
Mounting and Operation:
- If there is a transport protective film on the solar panel, remove it.
- Handle solar lights with care.
Cleaning:
- Refer to the user manual for cleaning instructions.
Technical Specifications:
- Solar Cell: [specification]
- LED: [specification]
- Dimensions: [specification]
- Weight: [specification]
- Protection Grade: [specification]
- Battery: [specification]
- Motion Sensor: [specification]

Please refer to the user manual for additional safety notes and detailed instructions on product usage.

Dear Ladies and Gentlemen,
Instruction manuals provide valuable hints for using your new device. They allow you to use all functions to avoid misunderstandings and damage. Please take the time to read this manual carefully and keep it for future reference.
If you pass the device on to third parties, enclose these instructions.

Installation

Unscrew the bottom.
Unscrew the battery compartment and insert the batteries with the correct polarity.
Screw the battery compartment and the bottom back on. Turn the light on.

SAFETY NOTES

Please note the following safety notes to avoid malfunctions, damage or physical injury:

Please read this manual carefully and use the device only according to this manual.
Dispose of used packaging material carefully or store it out of the reach of children. There is a danger of suffocation!
Persons with limited physical, sensorial or mental abilities are not allowed to use the device, unless they are supervised and briefed for their safety by a qualified person.
The LED lamp with solar panel is not a toy. Do not allow children play with it.
The devices may be installed on normally flammable surfaces.
Do not look directly into the LEDs or point the light directly at the eyes of people or animals.
Do not operate the solar lights as the main light source for path lighting, etc.
The product must not be exposed to extreme temperatures, strong vibrations or strong mechanical stress.
Batteries must not be disassembled, thrown into fire or short-circuited.
Attention! Use ONLY rechargeable batteries. Otherwise there is a risk of explosion! Rechargeable batteries do not belong in the household waste. Please take these to your local collection point for old batteries.
If the device is damaged, stop using the device and have it repaired by a specialist or contact our customer service. Do not disassemble the device or attempt to repair it yourself.

OPERATION

Intended use
The product serves as a decorative solar light for the garden or patio area. The battery is charged during daylight using the built-in solar panel. The solar light switches on the light automatically in the dark and when there is movement, the inserted battery takes over the energy supply of the light source. The motion detector switches the light on when there is movement within a radius of 3-5 m. If there is no movement, the LED light switches off automatically after 15 seconds.
The solar light is designed for private use and is not suitable for commercial use. Any use other than that described above is not permitted.

Assembly and commissioning

Screw the solar light to a wall approx. 2-3 m high using the supplied assembly material.
Press the ON/OFF button once to turn the light on. The lamp charges automatically during the day and switches on automatically at night as soon as there is movement. If no movement is detected for 15 seconds, the light switches off automatically.
If there is a transport protection film on the solar panel, remove it.

Handling Solar Lights

The performance of the solar light varies with the season, depending on the duration and strength of the sunlight received.
During prolonged periods of weather without sufficient solar radiation, it may happen that the charge status of the battery is too low to enable lighting for a longer period of time. The battery is charged with less energy during the day than energy is withdrawn at night. This inevitably shortens the lighting duration. The battery can be deeply discharged in this way and thus damaged. When not in use for a long time, set the switch to OFF to avoid damage to the battery or solar light. To change the battery.
Make sure that the solar panel is not dirty or covered by snow and ice in winter. This reduces the efficiency of the solar panel. Cold temperatures have a negative impact on battery life. If you do not need the solar light for a longer period of time, e. g. in winter, it should be cleaned and stored in a dry, frost-free room. When not in use for a long time, set the switch to OFF to avoid damage to the battery or solar light. To change the battery.

Cleaning

Clean the housing of the solar light with a slightly damp cloth. Do not immerse the solar light in liquids.
Do not use aggressive chemicals or abrasive cleaners to avoid damaging the surfaces.

Technical data

Solar cell: 5,5 V / 80 mA / 0,4 W (70 x 40 mm)
LED: 100 pieces /white / 100 lm
Dimensions: 135 x 55 x 97 mm
Weight: 140 g
Degree of protection: IP44
Battery: 1x Li-Ion (18650) / 3,7 V / 1200 mAh
Motion detector: 3-5 m / 110°

EU DECLARATION OF CONFORMITY

We, the Westfalia Werkzeugcompany, Werkzeugstraße 1, D-58093 Hagen, declare by our own responsibility that the product is according to the basic requirements, which are defined in the European Directives and their amendments.
PIR Solar Wall Light – 2 pcs
Article No. 60 16 56

2011/65/EU
Restriction of the Use of certain hazardous Substances in electrical and electronic Equipment (RoHS)

2014/30/EU
Electromagnetic Compatibility (EMC)
EN IEC 55015:2019+A11, EN 61547:2009

The technical documentations are on file at the QA department of the Westfalia Werkzeugcompany.

DISPOSAL

Dear Customer,
Please help avoid waste materials. If you at some point intend to dispose of this article, then please keep in mind that many of its components consist of valuable materials, which can be recycled. Please do not discharge it in the rubbish bin, but check with your local council for recycling facilities in your area.