munchkin CCD-0327-000 Spring 2-in-1 Bouncer and Rocker Owner’s Manual
- June 13, 2024
- munchkin
Table of Contents
munchkin CCD-0327-000 Spring 2-in-1 Bouncer and Rocker Owner’s Manual
IMPORTANT SAFEGUARDS
WARNING :
FALL HAZARD: Babies have suffered skull fractures/head injuries falling while in and from bouncers/rockers.
- Use bouncer/rocker ONLY on floor.
- ALWAYS use restraints and adjust to fit snugly.
- NEVER lift or carry baby in bouncer/rocker.
SUFFOCATION HAZARD: Babies have suffocated when bouncers/rockers tipped over on soft surfaces and/or when bouncers/rockers have been used as a sleep product.
- NEVER use on a bed, sofa, cushion, or other soft surface.
- Stay near and watch baby during use. This product is not safe for sleep or unsupervised use. If baby falls asleep, remove baby as soon as possible and place baby on a firm, flat sleep surface such as a crib or bassinet.
To prevent falls and suffocation:
- ALWAYS use restraints and adjust to fit snugly.
- STOP using bouncer/rocker when baby starts trying to sit up or has reached 20lbs, whichever comes first.
- DO NOT use this product if it is damaged, broken or missing components.
- The upright position is only for children who have developed enough upper body control to sit up without tipping forward.
- ALWAYS place bouncer/rocker on floor. Never use on any elevated surface.
- MAX 20 lb/9kg
- ENSURE all components including the seat cover is fitted correctly.
- DO NOT allow children to play unsupervised near the product.
INCLUDED PARTS
- Safety Harness
- Removable Fabric Seat Sleeve
- Base Adjusters
- Incline Adjuster
- Locking Pin
- Safety Release Trigger
HOW TO USE
The Spring 2-in-1 Bouncer & Rocker arrives folded flat and in rocker mode. Simply lift the top of the seat to one of the three incline positions, then release to unfold.
CHANGING MODES
To switch between rocking and bouncing mode, simply twist the base adjusters
until they click into the desired position. Be sure both base adjusters are in
the same position to avoid tip-over.
ROCKER MODE
BOUNCER MODE
SUGGESTED WEIGHT LIMIT
The following weight limits apply, when using Spring in rocking or bouncing mode.
POSITION: ROCKING MODE: BOUNCING MODE
Level 3: 20 lbs (9kg):20 lbs (9kg)
Level 2: 18 lbs (8kg: 20 lbs (9kg)
Level 1: 13 lbs (6kg): 15 lbs (7kg)
NOTE: The lowest position is recommended for newborns up to 13 lbs or 15 lbs.
CHANGING POSITION
To change position, lift the seat slightly to release from current level, then guide the locking pin into desired level.
After adjusting the seat incline, make sure the locking pin is anchored
securely in a groove, you should hear a click once it’s in place.
TRAVEL / STORAGE MODE
To pack the product flat for storage or travel, pull the safety release trigger and guide the locking pin to the bottom of the incline adjuster so that the seat lays flat against the base.
To minimize storage size, twist the base adjusters to point the feet inward.
HARNESS STRAPS
Place your child in the seat and then buckle the harness straps. Use the strap adjusters to ensure a snug fit.
IMPORTANT: Always use the seat harness while your child is seated in the
bouncer or rocker mode.
HOW TO CLEAN
REMOVE COVER: Unsnap the flap buttons on the bottom edge of the cover, then
remove the cover from the seat frame.
WASHING INSTRUCTIONS
To Wash the Seat Cover: Remove it from the frame and wash separately.
Wash Guide: Machine Wash, Tumble dry warm, DO NOT IRON.
To Clean the Frame: Wipe frame and the legs with a damp cloth.
TECHNICAL SPECIFICATIONS
- Product Name: Spring 2-in-1 Bouncer and Rocker
- Model: MKCA0864 REV1
- Weight: 3.8 lbs. (1.7 kg)
- Materials:
- Frame: Aluminum, steel, plastic
- Seat fabric: 100% polyester
- Maximum Size:
Highest Position: L 27.7″ x W 23.9″ x H 20.8″
Travel Position: L 32.1″ x W 15.9″ x H 6.6″
CERTIFED
sample tested to meet U.S. Federal, ASTM and other safety requirements.
