HUDSON VALLEY HL647401 Aisa One Light Floor Lamp Instruction Manual
- June 13, 2024
- HUDSON VALLEY
Table of Contents
HL647401 Aisa One Light Floor Lamp
Instruction Manual
HL647401 Aisa One Light Floor Lamp
WARNING/CAUTION
- DISCONNECT POWER BEFORE RE-LAMPING OR WIRING THE FIXTURE. READ ALL INSTRUCTIONS COMPLETELY BEFORE STARTING INSTALLATION.
- TO AVOID THE RISK OF FIRE OR SHOCK, FIXTURE MUST BE INSTALLED IN COMPLIANCE WITH ALL APPLICABLE NATIONAL AND LOCAL ELECTRICAL/BUILDING CODES. THE INSTALLATION AND MAINTENANCE OF THIS UNIT SHOULD BE COMPLETED BY A LICENSED ELECTRICIAN OR CERTIFIED FACTORY TRAINED TECHNICIAN.
- CALIFORNIA PROP 65: THIS LIGHTING FIXTURE CONTAINS CHEMICALS KNOWN TO THE STATE OF CALIFORNIA TO CAUSE CANCER, BIRTH DEFECTS, AND/OR OTHER REPRODUCTIVE HARM. WASH HANDS AFTER USE.
- UNPACK FIXTURE, PARTS AND PARTS BAG (S) BEFORE DISCARDING THE CARTON. MAKE CERTAIN THAT ALL PARTS ARE FOUND. INSPECT THE FIXTURE PRIOR TO INSTALLATION FOR ANY DAMAGE. HVLG DOES NOT PAY OR REIMBURSE ELECTRICIAN FEES. FIXTURE MAY NOT BE RETURNED ONCE IT HAS BEEN INSTALLED. SEE WARRANTY FOR EXCEPTIONS.
- PLEASE CLEAN WITH A SOFT, DRY CLOTH ONLY! DO NOT USE CLEANSERS.
mitzi
ASIA
HL647401
Installation Instructions
FIXTURE INSTALLATION
- Screw the FIXTURE ASSEMBLY (D) on the TUBE (E) of the fixture.
- Screw the TUBE (E) on the BASE (F) of the fixture.
- Lift the SHADE (B) onto the FIXTURE ASSEMBLY (D) and secure using the BOLT NUT (C).
- Screw the BULB (A) up into the SOCKET of the fixture.THIS FIXTURE IS RATED FOR 60 WATT TYPE G25 LAMP. DO NOT EXCEED THE RECOMMENDED WATTAGE!
- Plug the CORD (G) into the wall outlet. pull the switch on the socket.
| PART(S) | REPLACEMENT PART NAME | NUMBER |
|---|---|---|
| B | SHADE | SHD-HL647201 |
| C | BOLT NUTS | NUT-HL647201 |
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>