JMTek WPC40 4 in 1 Foldable Wireless Charging Station Instruction Manual
- June 13, 2024
- JMTek
Table of Contents
JMTek WPC40 4 in 1 Foldable Wireless Charging Station
Product Information:
- Dimensions: 100mm x 80mm
- FCC Compliance: This device complies with Part 15 of the FCC Rules.
- FCC Radiation Exposure Limits: The equipment meets FCC radiation exposure limits for an uncontrolled environment.
Product Usage Instructions
- To ensure compliance with FCC regulations, this device should not cause harmful interference to other devices, and it must accept any interference received.
- If you experience undesired operation or interference, you may need to reorient or relocate the receiving antenna.
- Increasing the separation between the equipment and receiver can also help minimize interference.
- For optimal performance, connect the equipment to an outlet on a circuit different from the one to which the receiver is connected.
- In case of difficulties, it is recommended to consult the dealer or an experienced radio/TV technician for assistance.
- To comply with FCC radiation exposure limits, ensure there is a minimum distance of 20cm between the radiator (device) and your body during installation and operation.
Product Introduction
This product is a 4-in-1 fast wireless charger that simultaneously wirelessly charges phones /iWatch/TWS Bluetooth headsets that support the QI standard. This product also includes a two level, built-in night environmental light. This product has a multi-level folding design, making it easier to store and carry. It can charge multiple devices at the same time while in the open position. The mobile phone can charge vertically or horizontally. While charging, you can video chat or watch your favorite movie or TV.
Specification Parameters
Product Name| 4 in 1 Fo l dable Wireless
Charg i ng Station
---|---
Items lnduded| W i reless Charger, Charging Cable ,
Instruction Manual
Materials| Plastic and Acrylic
Color| Black , White
Input| Type-C
Input Current| ;, 9Volt•2Amp, 5Volt-3Amp
Motrlle Phone 0Utput|
15 Watt/ 10 Watt /7.5 Watt/ 5 Watt
Walch0u4Jut| 3Watt
Earl>ud Output| 5Watt
Adapter| ;>QC3.0 lBW
Dimensions| 6.5″ X 5.55″ X.75″
Compatibility
| Supports Qi Compliant Mobile Phones, Bluetooth® Earbuds
and Smart Watches .
Operating Steps:
- Plug the type C USB connector of the included charging cord into the 4 in 1 Charger and the USB side into a USB power source.
- To turn on the environmental light, press the button in front of the earbud charging pad to cycle through normal light, brighter light, and then off.
- Open the charger and adjust the kickstand to the desired angle of recline.
- To charge devices such as wireless charging capable smartphones, watches, or Bluetooth® earbuds, place the device flat on the designated charging area. After .01 seconds, the device will start charging. To stop charging or after fully charging, just remove the device from the charging area.
- The mobile phone may charge horizontally or vertically when placed over the designated area.
- The product folds up for easy storage and portability
Precautions:
- Do not immerse the product in water and keep out of extreme heat or cold temperatures.
- Do not disassemble or break open the product.
- Please keep the product away from flammable and explosive liquids, or gases.
- Do not place magnetic items or precision machinery too close to the product.
FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>