Westfalia 96 30 49 18 Volt BISCUIT JOINTER User Guide

: June 13, 2024
: Westfalia

Table of Contents

96 30 49 18 Volt BISCUIT JOINTER
TECHNICAL DATA
SAFETY NOTES
DISPOSAL
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

96 30 49 18 Volt BISCUIT JOINTER User Guide

BISCUIT JOINTER 18 V
Art. Nr. 96 30 49

96 30 49 18 Volt BISCUIT JOINTER

1	ON / OFF switch
2	Handle
3	Drive motor
4	Additional handle
5	Spindle catch
6	Clamping screw for angle adjustment
7	Angle fence
8	Clamping screw for height adjustment
9	Adjustment wheel for milling depth
10	Depth adjust screw
11	Base plate
12	Dust extraction system
13	Dust bag
14	Face spanner
15	Center marking
16	Height fence
17	Milling width marking
18	Battery pack
19	Battery unlocking button

Dear Customers,
Instruction manuals provide valuable hints for using your new device. They enable you to use all functions, and they help you avoid misunderstandings and prevent damage. Please take the time to read this manual carefully and keep it for future reference.

Unbox device
Adjust the depth stop
Set the milling height
Set the milling angle
Set the milling depth
Attach vacuum system
Insert the battery
Start the device
Change the side milling cutter

|
---|---
|

TECHNICAL DATA

1
Battery*| 18 V Li-Ionen
---|---
Weight (without battery)| 2339 g
Dimensions| 360 x 160 x 140 mm
Milling discs diameter and thickness| Ø 100 mm 3,9 mm
Inside diameter milling disc| 22 mm
Spindle diameter| M10
Number of teeth| 6
No-load speed| 8 500 min-¹
Biscuit specifications| #0, #10, #20, S, D, MAX

1 not included in the delivery

Protection class	III
Sound pressure level*2	LpA = 74 dB (A)

KpA = 3 dB(A)
Sound power level2| LWA = 85dB(A)
KWA=3dB(A)
Hand arm vibration2| Ah = 1.732 m/s2
K = 1.5 m/s2

The declared vibration total value and the declared noise emission values have been measured in accordance with a standard test method. The declared vibration total value may also be used in a preliminary assessment of exposure.
Warning! The vibration and noise emission during actual use of the power tool can differ from the declared total value depending on the ways in which the tool is used, in particular, what kind of work piece is machined. It is necessary to identify safety measured to protect the operator that are based on an estimation of exposure in the actual conditions of use (taking account of all parts of the operating cycle such as the times when the tool is switched off and when it is running idle in addition to the trigger time). Try to minimize the impact of vibration and noise. Exemplary measures to reduce vibration exposure include wearing gloves while using the tool, limiting working time, and using accessories in good condition.

SAFETY NOTES

Please note the included general safety notes and the following safety notes to avoid malfunctions, damage or physical injury.
Please also observe the safety notes in the manuals of battery and charger.

Please read this manual carefully and use the unit only according to this manual.
Make sure the operating voltage stated on the type label corresponds to the power mains available in your area.
Persons with limited physical, sensorial or mental abilities are not allowed
to use the unit, unless they are supervised and briefed for their safety by a qualified.
Wood dust may be hazardous to your health. Always wear a dust mask.
When using the unit, please wear ear protection and safety goggles.
Check the biscuit jointer and the electrical connections for any damage and do not use the tool if the biscuit jointer or the cable is damaged.
Use the biscuit jointer and the included attachments according to this manual and only for the intended purpose.
Make sure the biscuit jointer is switched off before plugging in.
Clamp the work piece with chuck or a vice to avoid slipping. When operating the machine always hold the biscuit jointer firmly with both hands. Always provide for a secure footing when working.
Protect the biscuit jointer from moisture and do not immerse the machine in liquids of any kind.
The biscuit jointer must be running at full speed before lowering into the work piece.
Caution: Allow for run down time of the cutter blade after turning the biscuit jointer off. Wait for the machine to come to a complete stop before removing from the work piece.
Do not force the biscuit jointer. Your biscuit jointer will do better job if you take it slowly.
Avoid cutting nails and screws. Inspect the work piece and remove all nails and screws before cutting.
Always switch off the biscuit jointer and then unplug before adjusting, while changing the attachments, when not in use and after work and while maintaining.
Keep the ventilation slots clean and free from foreign objects. Make sure that dust cannot enter into the mechanical parts.
Do not use a damaged blade. Replace it with a suitable new one.
Do not work on pieces too small to safely clamp.
Do not disassemble the machine and do not try to repair it yourself. Have the unit repaired by a professional or turn to our customer support service.
Always use original replacement parts.

Additional safety instructions for batteries and battery chargers
WARNING: Lithium-ion batteries pose a risk of fire, burns and explosion if improperly used, stored or charged.
Use charger properly.

Before charging the battery, follow the instructions in the relevant section of this user manual for the correct use of the battery charger.
Do not use the charger to charge batteries other than the ones supplied. Keep the battery charger clean; Foreign bodies and dirt can cause a short circuit and clog the ventilation holes. Failure to follow these instructions could result in overheating or fire.
Allow batteries to cool for 15 minutes after charging or intensive use.
Failure to follow these instructions could result in overheating or fire.
Only charge the batteries in chargers recommended by the manufacturer.
A charger designed for a particular type of battery may present a fire hazard if used with other batteries. Only charge the lithium-ion battery with the charger included in the scope of delivery or a charger specially designed for this item.
Only use the rechargeable batteries provided for this purpose in the power tools. The use of other batteries can lead to injuries and the risk of fire.
If the connection cable of the charger is damaged, it must be replaced by the manufacturer, an authorized service workshop or a specialist before use.
The device is designed for use up to 2000 m above sea level.
Keep the battery out of the reach of children.
When not in use, store batteries in a dry place at room temperature (approx. 20˚ C).
Do not open, disassemble, compress, heat above 60 ° C or burn batteries.
Do not throw into fire or the like.
When the battery is not in use, keep it away from paper clips, coins, keys, nails, screws, or other small metal objects that could cause the contacts to be bridged. A short circuit between the battery contacts can result in burns or fire.

Batteries do not belong in the household garbage.
For battery disposal please check with your local council.

DECLARATION OF CONFORMITY

We, the Westphalia Werkzeugcompany, Werkzeugstraße 1, D-58093 Hagen,
declare by our own responsibility that the product
Biscuit Jointer 18 V
Article No. 96 30 49
is according to the basic requirements, which are defined in the European Directives and their amendments.
2011/65/EU
Restriction of the Use of certain hazardous Substances in electrical and electronic Equipment (RoHS)
2014/30/EU
Electromagnetic Compatibility (EMC)
EN 55014-1:2017+A11, EN 55014-2:1997+AC+A1+A2
2014/35/EU
Machinery
EN 62841-1:2015+AC, EN 60745-2-19:2009+A1
The technical documentations are on file at the QA department of the Westphalia Werkzeugcompany.
Hagen, 16th of December, 2021 QA Representative

DISPOSAL

Dear Customer,
Please help avoid waste materials.
If you at some point intend to dispose of this article, then please keep in mind that many of its components consist of valuable materials, which can be recycled. Please do not discharge it in the rubbish bin, but check with your local council for recycling facilities in your area.