MOBICLINIC Treadmill Love Of Running User Manual

MOBICLINIC Treadmill Love Of Running

Product Information

The Treadmill Cinta de correr TIBET is a fitness equipment designed for indoor running and walking exercises. It comes with various features and components to provide a convenient and effective workout experience.

Parts

• Llave de seguridad – Security key
• Cubierta vertical – Vertical cover
• Tapa del motor – Engine cover
• Pomo M10 – M10 knob
• Superficie de la cinta – Tread surface
• Cubierta lateral – Side cover
• Cubierta posterior – Back cover
• Perno de ajuste – Adjustment bolt

Warnings and Precautions

Before using the treadmill, make sure to read and follow the safety instructions and precautions provided in the user manual.
This will ensure safe and proper usage of the equipment.

Assembly

Follow the steps below to assemble the treadmill:

1. Unpack the product and lift the vertical posts in the direction of the arrow.
2. Attach the various components according to the instructions provided.

Treadmill Operation

To start using the treadmill, follow these steps:

1. Turn on the power.
2. Attach the security key.
3. Press the START button.
4. Select the desired speed.
5. Start running or walking on the treadmill.
6. Press the STOP button to stop the treadmill.

For additional functionality and program options, refer to the user manual for detailed instructions.

Maintenance

To ensure the longevity and optimal performance of the treadmill, follow these maintenance guidelines:

• Store the equipment in a closed place, away from dust and moisture.
• Regularly align the treadmill belt if it moves off-center during use.
• Keep the treadmill clean by wiping it with a soft cloth.
• If you encounter any issues or errors, refer to the troubleshooting section of the user manual or seek professional assistance.

PARTS

INCLUDED COMPONENTS

WARNINGS AND PRECAUTIONS

Read the user manual carefully before using the product.

• Keep children and pets away at all times.
• It is recommended to warm up before a workout.
• Place the appliance on a flat surface.
• It is recommeded to keep the unit in a well ventilated area.
• Check the maximum weight your equipment can support in the user manual.
• It is recommended to not use clothes that can get stuck.
• The power cords must be kept away from hot surfaces.
• Make sure to use the security key. It has a magnet that must be placed on the display. At the end of the cord there is a clamp that must be fastened to the clothing.
• Do not leave the appliance unattended.
• Once the equipment is folded, ensure it is properly assembled to the closing system.
• Do not let objects fall in the gaps of the equipment.
• Make sure to unplug the power cord from the equipment before cleaning it.
• It is recommended that two people assemble the equipment.
• This unit is designed for domestic use.

TECHNICAL FEATURES

Bluetooh App

Speed range| 1.0 – 10 KM/H
Maximum user weight| 100 Kgs
Maximum engine weight| 1.5 CHP

PARTS INCLUDED

ASSEMBLY

• Step 1
  Unpack the product and lift the vertical posts in the direction of the arrow A.

• Step 2
  Attach the vertical posts with 2 M10 knobs on both sides.
  Use a 6 mm wrench to fix the tray holder with two M6x14 screws in the position shown in the picture.

• Step 3
  To fold the product after use, loosen the M10 knobs on both sides of the vertical posts, afterwards lift the machine in the direction of the arrow D until it’ s in a vertical position.

• Step 4
  In order for the moving wheel to be visible, the belt must be in a vertical position, as shown in the picture on the left (position F).

TECHNICAL FEATURES

Bluetooth app

Speed range| 1.0 – 10 KM/H
Maxiumum user weight| 100 Kgs
Maximum engine power| 1.5 CHP

TREADMILL OPERATION

Control system

Steps to follow to start up the device

Select a mode

Select a program

List of programs

MAINTENANCE

• STORAGE: Keep your equipment in a closed space, away from dust and humidity.
• POWER CORD: Ensure the cable and the plug are in good condition.
• SCREWS AND CABLES: Check and tighten the screws often, as due to the vibration screws and nuts tend to loosen. Check regularly that the cables are in good condition.
• LUBRICATION: It is very important to properly lubricate the running belt with silicone or teflon oil. This lubrication must be applied regularly, even before the first use. There is an orifice to add the oil in the engine cover. It is recommeded to add the oil with the machine programmed at the top speed. The right amount to add to lubricate the belt is one third of silicone oil at a time.

• BELT ALIGNMENT: Due to use, the belt might move off center. If the belt has been displaced to the left, start the treadmill and turn the speed up to 3 MPH.
  bolt counter-clockwise. Do not tighten the belt too tautly to be able to walk. Repeat the procedure until the belt is properly aligned. If the belt slips, use a 6 mm wrench and tighten the screws on both sides, turning 1/4 clockwise.
  Reapeat this procedure until the belt is firmly tightened.

• CLEANING: Do not use abrasive products. A wet cloth is sufficient.

COMMON ERRORS

NO DISPLAY

| a) Electricity not connected| Connect the electricity
b) Power switch not turn on| Turn on power switch
c) PCB no power or broken| Press over-load protector or change new PCB
d) Signal wire not connected| Re-connect signal wire or change new one
e) Computer broken| Change new computer
f) Background light broken| Check background light wire or change new one

NOT DISPLAY ALL INFORMATION

| a) Display drive IC not inser-

ted well

| Re-insert IC, and re-weld it or change new one
b) EMI gasket slip, not well fastened| Re-assemble screen

NOT RUN SMOOTHLY

| a) Driving position has resis- tance| Adjust driving position, or add some silicon oil
b) Running belt too tight or

too loose

| Adjust the belt tension
c) PCB toque too big or too small| Adjust torque to right posi- tion
 | —| a) Safety key off| Put on safety key
 | E01| a) Signal wire not well con- nected| Re-connect signal wire
b) Signal wire broken| Change new signal wire
c) Signal wire broken| Change new computer
d) PCB broken| Change new PCB
 | E02| a) Motor wire not well con- nected, or open circuit| Re-connect motor wire or change new motor
b) IGBT on PCB broken| Change new PCB
c) Input voltage too low| Stop using, ask electrician to check
 | E03| a) Speed signal wire not well connected, or sensor broken| Re-connect speed signal wire or change new sensor wire
---|---|---|---
b) PCB broken| Change new PCB
 | E04| a) Incline motor wire not well connected| Re-connect incline motor wire
b) Incline motor broken| Change new incline motor
c) PCB broken| Change new PCB
 | E05| a) Over-loaded| Turn off and re-start machine
b) Driving position hinder| Adjust driving position, or add oil
c) Motor short circuit| Change new motor
d) PCB burnt| Change new PCB
 | E06| a) Motor wire not well con- nected| Re-connect motor wire

ZHETJIANG RONGSHUN TECHNOLOGY CO., LTD No. 399 Zhenghan North St, High-Tech Industrial Park, Jinyi New Urban District, Jinhua, Zhejiang, China

GRUPO R. QUERALTÓ S.A. Polígono Industrial El Pino, Calle Pino Albar, 24, 41016, Sevilla (Spain)

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>