PULSAR Proshift Dry Herb Vaporizer User Manual
- June 13, 2024
- Pulsar
Table of Contents
PULSAR Proshift Dry Herb Vaporizer
Thank you for purchasing the Pulsar” ProShift- Vaporizer! In order to ensure safe use, please read all instructions and safety warnings before operating. Failure to follow instructions may result in injury and may void your warranty.
Key Features
- Air Heating
- Titanium Heating Chamber
- 3000mAh Battery
- Isolated Airpath for Easy Cleaning
- 3.7 Minutes Adjustable Session Time
- Digital Display
Overview
Includes
Important Usage Tips
- Rapidly press the power button 5 times, activation of power On/Off will be confined by haptic feedback.
- Press and hold the power button and •-” button simultaneously for 2 seconds to change from Fahrenheit to Celsius degrees and vice versa
- Session timer setting: hold the power button for 2 seconds until a selection is positioned under SET of the timer, press the control button +/· to adjust the working time from 180 to 420 seconds.
- 248-430 •F / 120-221 •c When the selected temperature is reached, the device will notify you with haptic feedback.
- The display indicates temperature information, battery status, and duration timer.
- Quick battery check: one hit on the power button when the device is off, the icon on screen will show the remaining battery level
Display Indication
Fahrenheit Display
The default display is Fahrenheit:. Mark SET (page 4) to select the
temperature.
Celsius Display
Mark SET (page 4) to select the temperature
Timer Display
Mark SET (page 4) to select the operating time.
How To Load Dry Herb
How To Clean Heating Chamber
Load/Remove The Mouthpiece Components
How To Mamtam The Z1rcoma A1rpath
How To Clean The Z1rcoma A1rpath
-
Remove and disassemble mouthpiece (page 9)
-
Clean the zirconia mouthpiece and airpath with a cotton swab and isopropyl alcohol.
Note : these pieces can also be soaked in alcohol. -
Clean the rest of the mouthpiece with a mild detergent and cloth.
-
Clean the chamber with alcohol and a cotton swab, do not put alcohol directly into the chamber.
-
Once all the pieces have air dried the mouthpiece can be reassembled
Charging Instructions
- Battery capacity 3000 mAh, USB-C charging, SV/2.A suggested.
- Initially charge the Pulsar«i ProShift”‘ for 2 hours. The battery will stop charging when the icon IIDI is full.
- When battery level is low, charge battery with included USB-C cable to a compatible wall charger. Low battery level will be indicated with icon D.
- Do not use Pulsar ProShift while charging
Manufactured by Pulsar4
Asheville, NC 28806
Designed in USA
Made in Chi,a
Not intended for tobacco or illegal substances.
WARNING : Cancer and Aeproducti•,e Harm –
www.P65Wamlngs.ca.gov
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>