PULSAR 510 Carts Barb Fire Slim Vaporizer Instruction Manual

June 13, 2024
Pulsar

PULSAR 510 Carts Barb Fire Slim Vaporizer Instruction Manual
PULSAR 510 Carts Barb Fire Slim Vaporizer

FEATURES

  • Full stainless steel body and coil housings
  • Quartz rod wrapped with a dual-wire
  • Clapton Coil Zirconia mouthpiece with a built-in dab tool
  • Built-in silicone-lined bottom storage container
  • (leakproof and highly smell-resistant)
  • 3 variable voltage settings
  • Battery level indicator
  • 10-second Sesh Mode
  • Convenient USB-C charging port
  • Replaceable coils

TECHNICAL SPECIFICATIONS

  • Battery Capacity: 800mAh
  • Voltage: 2.7V 3.0V-3.3V
  • Charging: USB Type-C
  • Resistance: 0.700

HOW TO USE (CONCENTRATES)

Unscrew the bottom storage container and remove the mouthpiece. Using the built-in dab tool, load a small amount of wax into the coil, then close and reattach the storage container.

Align the notches on the airflow cap with the coil ends, so that the dab tool aligns with the coil, then reattach the mouthpiece so that it fits snugly.

Click the power button 5 times to turn ON.

Click the button 3 times to cycle through the heat settings, until you find your preferred voltage (green light – 2.7v, blue light – 3.0v, red light – 3.3v)

Hold the button and gently draw on the mouthpiece, while keeping the pen upright, and enjoy!

Pulsar Pro Tip: For lower heat settings, you may want to gently puff until vapor is produced, and then begin your inhale!

For hands free use, tap the power button twice to activate 10-second hands- free Sesh Mode. To power down from Sesh Mode before the 10-second timer, press the power button once.

HOW TO USE (510 CARTS)

Remove the mouthpiece and upper housing, set aside. unscrew and remove Clapton Coil, set aside. Screw in the included 510 adapter. Follow steps 3-7 similar to CONCENTRATE USE.

BATTERY LEVEL INDICATOR

When the device is turned on, the side lights will show the battery level.

  • Green light – full battery
  • Blue light – medium battery
  • Red light – low battery

CHARGING

Use the included USB Type-C charging cable. The device will flash a red light. When the light turns green, the device is fully charged. A full charge will take under two hours.

HOW TO CLEAN

Soak the coil in isopropyl alcohol overnight. Allow coil to air dry completely. Fire the device on high to ensure no isopropyl residue remains. We recommend changing the coil every 2-4 weeks.

CONTENTS

  • 1 Pulsar Barb Fire Slim
  • 1 Clapton Coil
  • 1 USB-C  Charging Cable
  • 5 Extra O-rings

Important Safety Warnings

In order to ensure safe use, please read all instructions and safety warnings before operating. Failure to follow instructions may result in injury and may void your warranty.

  • Do not expose to extreme temperatures or direct sunlight.
  • Do not drop the device or accessories.
  • Do not drop or submerge in any liquid.
  • Do not modify the electronics in any way. This device is intended for adults only. Do not sell or provide to minors. Keep all parts, concentrates, herbs, and liquids away from children and pets. This is not a medical device and is not intended to diagnose, treat, mitigate, cure, or prevent any ailment, disease, or other conditions. Consult a physician before use, especially if you suffer from heart disease or any other medical condition, or if you are pregnant or breastfeeding. Failure to follow any of these instructions could result in product damage, property damage, personal injury, and may void warranty.

Product Overawe

Scan the QR code on product packaging for the most current version of the manual, or go to https://www.pulsarvaporizers.com/pages/manuals

Manufactured by PulsarⓇ Asheville, NC 28806 Designed in USA, Made in China
PulsarVaporizers.com

PULSAR Logo

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals