JBL TUNE670NC Wireless On-Ear Headphones User Guide

JBL TUNE670NC Wireless On-Ear Headphones

Product Information

• Model: TUNE670NC
• Speaker Size: 32 mm/1.25″
• Power Supply: 5V 1A
• Weight: 174 g / 0.384 lbs
• Battery Type: Lithium-Ion (690 mAh / 3.7 V)
• Charging Time: 2 hours from empty
• Music Playback Time with Active Bluetooth and Inactive RBA: Up to 70 hours
• Music Playback Time with Active ANC and Bluetooth: Up to 44 hours
• Music Playback Time with Active AUX and ANC: Up to 30 hours
• Conversation Time with RBA: Up to 30 hours
• Conversation Time without RBA: Up to 39 hours
• Frequency Range: N/A
• Impedance: 32 ohms
• Max Sound Pressure Level: 94 dB
• Microphone Sensitivity: -40 dBV/Pa at 1 kHz
• Bluetooth Version: 5.3
• Bluetooth Profile Version: A2DP v1.4, AVRCP v1.6.2, HFP v1.8
• Bluetooth Frequency Range: 2.4 GHz – 2.4835 GHz
• Bluetooth Power: < 10 dBm (PIRE)
• Bluetooth Modulation: GFSK, /4-DQPSK, 8DPSK

Product Usage Instructions

To use the TUNE670NC headphones, follow these steps:

1. Make sure the headphones are charged. Connect the included USB cable to the headphones and a power source with a 5V 1A output. The charging time is approximately 2 hours from an empty battery.
2. To turn on the headphones, press and hold the power button until the LED indicator light turns on.
3. Enable Bluetooth on your device and search for available devices. Select “TUNE670NC” from the list of available devices.
4. If prompted, enter the pairing code or confirm the pairing request on both your device and the headphones.
5. Once connected, you can start playing music or making calls using the headphones.
6. To activate the Active Noise Cancellation (ANC) feature, press the ANC button on the headphones. This will help reduce background noise for a more immersive audio experience.
7. To activate the TalkThru feature, press and hold the TalkThru button. This will lower the volume and allow you to have conversations without removing the headphones.
8. Adjust the volume using the volume buttons on the headphones.
9. To control music playback, use the playback controls on your device or the dedicated buttons on the headphones (if available).

Refer to the user manual for more detailed instructions and information.

WHAT’S IN THE BOX

APP

JBL HEADPHONES
GET EVEN MORE CONTROL AND PERSONALIZATION OF YOUR LISTENING EXPERIENCE WITH THIS FREE APP.

POWER ON & CONNECT

• TO ENTER PAIRING MODE AGAIN POWER OFF AND HOLD FOR 5 SECONDS.

MULTI-POINT CONNECTION

CONTROLS

ENABLE ADVANCE CONTROLS BY CONNECTING YOUR JBL TUNE67ONC TO JBL HEADPHONES APP

WIRED LISTENING MODE

VOICEAWARE

DO MORE WITH THE APP

CHARGING

FACTORY RESET

LED BEHAVIOUR

TECHNICAL SPECIFICATION

• Model: TUNE670NC
• Driver size: 32 mm/ 1.25″ Dynamic Driver
• Power supply: 5 V===1 A
• Weight: 174 g/ 0.384 lbs
• Battery type: Lithium-ion battery (690 mAh/ 3.7V)
• Charging time: 2 hrs from empty
• Music playtime with BT on and ANC off: Up to 70 hrs
• Music playtime with BT on and ANC on: 174 g/0.384 lbs
• Music playtime with AUX and ANC on: Up to 30 hrs
• Talk time with ANC on: Up to 30 hrs
• Talk time with ANC off: Up to 30 hrs Up to 39 hrs
• Frequency response: 20 Hz – 20 kHz
• Impedance:  32 ohm
• Sensitivity:  W 100 dB SPL@1 kHz
• Maximum SPL: 94 dB
• Microphone sensitivity:  -40 dBV/Pa@1 kHz
• Bluetooth version: 5.3
• Bluetooth profile version: A2DP v1.4, AVRCP v1.6.2, HFP v1.8
• Bluetooth transmitter frequency range: 2.4 GHz  – 2.4835 GHz
• Bluetooth transmitter power: < 10 dBm (E.I.R.P)
• Bluetooth transmitter modulation: GFSK, 71/4-DOPSK, 8DPSK
• Maximum operation temperature: 45 °C

TO PROLONG BATTERY LIFESPAN, FULLY CHARGE AT LEAST ONCE EVERY 3 MONTHS. BATTERY LIFE VARIES BY USE AND SETTINGS.

IC RF Exposure Information and Statement
The SAR limit of Canada (C) is 1.6 W/kg averaged over one gram of tissue. Device types: (IC: 6132A-TUNE670NC) has also been tested against this SAR limit According to this standard, the highest SAR value reported during product certification for head use is 0.040 W/Kg.
The device was tested for typical bodily operations where the product was kept 0 mm from the head. To maintain compliance with IC RF exposure requirements, use accessories that maintain a separation distance of 0mm between the user’s head and the back of the headset. The use of belt clips, holsters and similar accessories shall not contain metal parts in its assembly. Use of accessories that do not meet these requirements may not comply with IC RF exposure requirements and should be avoided.

Head operation
The device was subjected to a typical head manipulation test. In order to comply with RF exposure requirements, a minimum separation distance of 0 cm must be maintained between the user’s ear and the product (including the antenna). Head exposure that do not meet these requirements may not meet RF exposure requirements and should be avoided. Use only the supplied or approved antenna.
IC: 6132A-TUNE670NC
FCC ID: APITUNE670NC

WARNING
DO NOT ATTEMPT TO OPEN, SERVICE, OR DISASSEMBLE THE BATTERY | DO NOT SHORT CIRCUIT | MAY EXPLODE IF DISPOSED OF IN FIRE | RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE | DISPOSE OR RECYCLE USED BATTERIES ACCORDING TO THE INSTRUCTIONS

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by HARMAN International Industries, Incorporated is under license. Other trademarks and trade names are those of their respective owners.
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by HARMAN International Industries, Incorporated is under license. Other trademarks and trade names are those of their respective owners.
Google, Android and Google Play are trademarks of Google LLC.

Amazon, Alexa, Amazon Music, and all related logos are trademarks of Amazon, Inc. or its affiliates.
Product specifications and app screens are subject to change without notice.

HP_JBL_TUNE670NC_QSG_Global_SOP_V11 720202-019550

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>