JUMBO Bike Stroller Instructions
- June 13, 2024
- JUMBO
Table of Contents
**JUMBO Bike Stroller
**
Precautionary instructions
- Ideal for children 1-6 years old.
- Assembly must be done ONLY by adults.
- Before use, carefully check that all moving parts and fasteners are secure to ensure proper use of the tricycle.
- Never leave children without adult supervision.
- Do not allow children to stand upright on the tricycle.
- Do not use it in dangerous places, stairs or uneven ground to avoid injury.
- Keep it away from places with slopes, roads, swimming pools, high temperature and humidity, power supply, etc.
- No child is allowed to push the tricycle when another child is on it.
- Do not overload the tricycle.
- Maximum weight: 50 kg.
Maintenance
- Before each use, check that all components are well connected.
- For the main rotating parts of the bicycle (handlebars, etc.) frequent maintenance with oil is required for the best performance of the product.
- Avoid using or storing in wet, cold or high temperature environment for a long time.
- Do not use the bike if it is overloaded.
Assembly
- Insert the iron shaft.
- Fasten the cover and tighten the three screws in the three holes.
- Install the plastic parts and fasteners on both sides.
- Insert the front fork and tighten the screws on both sides.
- Insert the pedals.
- Turn the red button to adjust the push and ride of the bike.
- Place two black covers on the front of the frame and push them down.
- Install the front wheel.
- Insert the folding brackets.
- Attach the music playback attachment to the steering wheel using the screw.
- Insert the front basket.
- Insert the alignment hole of the front handlebar by tightening the nut of the screw.
- Install the mounting surface.
- Align the screws and nuts.
- Ready.
- Insert the rod into the frame.
- Insert the bottom of the handle.
- Insert the push handle bar into the cup holder.
- Align the hole in the seat base with the top nut.
- Insert the footrest into the hole.
- Insert the brake and swing it from side to side.
- Raise the seat back to adjust the seat angle or to bring it to a horizontal position.
- Turn the red knob to select the seat position.
- Place the iron shaft on the wheel and press the red knob to secure it.
- Insert the black cover into the slot.
- Insert the wheel covers.
- Place the rear frame onto the screw and tighten.
- Install the steering cable, adjust the direction and tighten the screws.
- The bike stroller is ready.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>