allen roth FSI 1301A BNIC Blaine 36 in to 72 in Brushed Nickel Steel Single Curtain Rod Instruction Manual
- June 13, 2024
- Allen+Roth
Table of Contents
allen roth FSI 1301A BNIC Blaine 36 in to 72 in Brushed Nickel Steel
Single Curtain Rod
Product Information
- Product Name: ALLEN+ROTH
- Trademarks: ALLEN+ROTH and logo design are trademarks or registered trademarks of LF, LLC. All rights reserved.
- Model Number: AS23154
- Package Contents: – A x 3 – B x 2
- Hardware Contents: – AA x 6 – BB x 6 – CC x 1
- Care and Maintenance: – No specific care and maintenance instructions provided in the text extract.
Product Usage Instructions
- Make sure to use a level (not included) during installation to ensure proper alignment.
- Attach the drapery hooks to the wall brackets. Use the provided anchors and screws if necessary.
- Remove rods from brackets by unscrewing them.
- Repeat the following steps for each bracket:
- Slide the telescoping rod through the bracket.
- Feed one drapery panel through the rod from the opening on the left.
- Screw the left rod into the left bracket.
- Feed the second drapery panel through the rod from the opening on the right. – Screw the right rod into the right bracket.
- Wrap the drapery panels around both ends of the bracket to secure them in place.
Note: The text extract does not provide information on installation surfaces (such as wood or studs) or specific instructions for those surfaces.
ALLEN+ROTH and logo design are trademarks or registered trademarks of LF, LLC. All rights reserved.
MODEL
Thank you for purchasing this allen + roth product. We’ve created these easy-
to-follow instructions to ensure you spend your time enjoying the product
instead of putting it together. But, if you need more information than what is
provided here, please visit Lowes.com, search the item
number and refer to the Guides & Documents tab on the product’s page.
If the item is no longer for sale, or if you have any questions or problems,
please call our customer service department at
866-439-9800, 8 a.m. – 8 p.m., EST,
Monday – Sunday. You could also contact us at
partsplus@lowes.com.
TROUBLESHOOTING
| PROBLEM | POSSIBLE CAUSE | CORRECTIVE ACTION |
|---|---|---|
| Drapery rod not level. | ||
| Drapery hooks not installed correctly. | Make sure to use level (not included) |
during installation .
|
|
|
Drapery rod hook is loose| Drapery hooks not anchored correctly.| Attach
drapery hooks to wall studs if possible. Use anchors and screws supplied if
you can’t attach to stud.
CARE AND MAINTENANCE
- Clean with a soft cloth.
- Do not use abrasive cleaning agents, solvents or polishes as they may damage the finish.
FEELING CONFIDENT? START YOUR NEXT PROJECT/CONFIANT?
Visit lowes.com for more information
PREPARATION
- Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list.
- If any part is missing or damaged, do not attempt to assemble the product
Estimated Assembly Time: 30 minutes
TOOLS REQUIRED (NOT INCLUDED)
PACKAGE CONTENTS
HARDWARE CONTENTS
INSTALLATION OVERVIEW
- Remove rods from brackets. NOTE: For larger width windows, two people may be needed for easier installation
- Place brackets against wall at desired locations and mark screw holes with a pencil. Use a tape measure and level to make sure marked screw holes are horizontal to each other.
- For mounting to drywall and paneling: Pre-drill two pilot holes for right bracket (1/4 in. drill bit) and insert anchors into pilot holes. Place screws through right bracket and into anchors. Screw in until tight. NOTE: For mounting to wood or studs, anchors (BB) are not needed
- Repeat the instructions in Step 3 for the center and left brackets. Slide the telescoping rod through the center bracket. Feed one drapery panel through the rod from the opening on the left. Screw the left rod into the left bracket.
NOTE: Adjust telescoping rod, to fit the width of your window - Feed the second drapery panel through the rod from the opening on the right and screw the right rod into the bracket.
- Wrap the drapery panels around both ends of the bracket.
Printed in China
Documents / Resources
|
allen roth FSI 1301A BNIC Blaine 36 in to 72 in Brushed Nickel Steel Single
Curtain
Rod
[pdf] Instruction Manual
FSI 1301A BNIC, FSI 1301B BNIC, FSI 1301A BNIC Blaine 36 in to 72 in Brushed
Nickel Steel Single Curtain Rod, BNIC Blaine 36 in to 72 in Brushed Nickel
Steel Single Curtain Rod, Brushed Nickel Steel Single Curtain Rod, Single
Curtain Rod
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>