Basics-Safe 2.6 Cu Ft Fireproof Drop Safe with Quick Place Drop Slot User Manual

Basics-Safe 2.6 Cu Ft Fireproof Drop Safe with Quick Place Drop Slot

INSTRUCTION MANUAL

Please do not keep emergency keys in your safe

Dear valued customer:
Thank you for choosing our products! You’ve taken an important step in organizing and protecting your most valued possessions. Every Series of our safes is professionally made and designed to provide safety. Please take time to read and familiarize yourself with the proper operating procedures of your new safe presented on the following pages. Again, thank you for choosing our products!

PACKAGE INCLUDES

• 1 × Digital Depository Safe
• 2 × Emergency Keys
• 1 × Emergency Battery Box
• 1 × Mounting Accessories
• 1 x Instruction Manual

CAUTION
The battery port on the lower side of the keypad is designed for an external power supply, in case the key is lost and the Internal battery dies.

OPENING YOUR SAFE FOR THE FIRST TIME

• Find the emergency keys in the accessories bag.
• Remove the emergency lock cover.
• Insert the emergency key, and turn it anticlockwise.
• Turn the knob clockwise to open the door.

CAUTION

• When opening the safe for the first time, you should use the emergency key to open it.
• When you have forgotten the codes, you can also use the emergency key to open the safe.
• Finish the operation, pull out the emergency key and keep it in a safe place.

INSERTING THE BATTERIES

• Open the door.
• Insert 4 × AA batteries ( Not included ) into the battery compartment.
• Normally, if the red light is on, it means the voltage is low and you should insert new batteries.

CAUTION

• Replace 4 new batteries. Always insert batteries correctly with regards to polarity ( + and – ) marked on the battery and the product.
• When the internal batteries are out of power. Please replace the new batteries and reset the user password.

OPENING THE DOOR WITH THE CODE

• Input your user code ( 3 to 8 digits ) , each pressing results in one buzzer beep and yellow light flashes.
• Press the ” # ” button to confirm, that the green light will be on.
• Rotate the knob clockwise and pull outwards within 5 seconds to open the door.

CAUTION
The preset code is ” 159 “. Before closing the safe, enter the new code and make sure the safe can be opened. If the code is entered incorrectly, the buzzer will sound 3 times and the yellow light will flash 3 times. You need to enter your code again.

CLOSING THE DOOR

• Turn the knob anticlockwise to close the door.

SETTING THE USER CODE

• With the door open, press the reset button, and start setting the code when the yellow light goes on;
• Input the new user code ( 3 to 8 digits ), and press ” # ” to confirm. The buzzer will beep twice and the yellow light will flash twice. It means the setting is successful.
• If the yellow light flashes with 3 buzzer beeps, it means the code changing is not effective, and you need to try again.

CAUTION
Before closing the safe, enter the new code and make sure the safe can be opened.

ALARM FUNCTION

• If the wrong code is entered 3 times continuously, the keyboard will be locked for 20 seconds and the buzzer will sound for 20 seconds.
• If the wrong code is entered 6 times continuously, the keyboard will be locked for 5 minutes and the buzzer will sound for 5 minutes.

CAUTION
The keyboard would be disabled during the beeping. You can only stop the beeps by opening the safe with an emergency key and power-cut by removing the battery.

MOUNTING

• Drill holes for expansion bolts (or clamping screws) in the right place;
• Turn the expansion bolts anticlockwise to separate;
• Use the expansion bolts (or clamping screws) to secure the case to the wall;
• Make sure the case is mounted in place as required and then tighten all screws.

CAUTION

• Use the expansion bolts when there is a concrete wall surface.
• Use the clamping screws when there is a wooden wall surface.

CUSTOMER SUPPORT

• If you have a problem that is not answered in the FAQ section of this manual, please contact us with the order number and the product pictures through the following email.

• We will offer you help. We encourage you to email us: at support@basics-safe.shop.

• ( Or scan the QR code below to contact our email. )

• If you are sure to return the Digital Depository Safe, our customer support team will provide you with return details.

• Please prepare the following information available when contacting us:

• Purchaser’s name and mailing address, e-mail address, and phone number.

• Online order number.

• Detailed description of the problem.

CONTACT US

• If there is any problem with your item, please contact us with the order number and product pictures through the following email, and we will offer you help.
• Email: support@basics-safe.shop.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>