allen roth FSI 1301B BNIC Blaine 72 in to 144 in Brushed Nickel Steel Single Curtain Rod Instruction Manual
- June 13, 2024
- Allen+Roth
Table of Contents
allen roth FSI 1301B BNIC Blaine 72 in to 144 in Brushed Nickel Steel
Single Curtain Rod
Product Information
The ALLEN+ROTH product is a curtain rod set designed for easy installation and usage. The product includes two telescoping rods, three brackets, and various hardware components. The ALLEN + ROTHlogo design is a trademark of LF, LLC.
Package Contents
- A – Telescoping rod x 3
- B – Bracket x 2
Hardware Contents
- AA – Anchor x 6
- BB – Screw x 6
- CC – Drill bit x 1
Care and Maintenance
To ensure proper care and maintenance of the product, please follow the
instructions provided in the user manual.
Trademarks
ALLEN+ROTH and logo design are trademarks or registered trademarks of LF,
LLC. All rights reserved.
Product Usage Instructions
Please follow the step-by-step instructions below for the installation and usage of the ALLEN+ROTH curtain rod set.
Step 1: Assembling the Curtain Rod
Remove the rods from the brackets by detaching them.
Step 2: Installing the Brackets
Attach the drapery hooks to the wall studs if possible. Use the provided
anchors and screws if wall studs are not available. Make sure to use a level
during installation to ensure proper alignment.
Step 3: Attaching the Rods
Slide the telescoping rod through the center bracket. Feed one drapery panel
through the rod from the opening on the left. Screw the left rod into the left
bracket.
Step 4: Repeat for Other Brackets
Repeat the instructions in Step 3 for the center and left brackets. Slide the
telescoping rod through the center bracket. Feed one drapery panel through
the rod from the opening on the left. Screw the left rod into the left
bracket.
Step 5: Completing the Installation
Feed the second drapery panel through the rod from the opening on the right
and screw the right rod into the bracket.
Step 6: Wrapping the Drapery Panels
Wrap the drapery panels around both ends of the bracket for a neat and
finished look.
ALLEN+ROTH and logo design are trademarks or registered trademarks of LF, LLC.
All rights reserved.
Thank you for purchasing this allen + roth product. We’ve created these easy-
to-follow instructions to ensure you spend your time enjoying the product
instead of putting it together. But, if you need more information than what is
provided here, please visit Lowes.com, search the item number and refer to the
Guides & Documents tab on the product’s page.
If the item is no longer for sale, or if you have any questions or problems,
please call our customer service department at
866-439-9800, 8 a.m. – 8 p.m., EST,
Monday – Sunday. You could also contact us at
partsplus@lowes.com.
TROUBLESHOOTING
CARE AND MAINTENANCE
- Clean with a soft cloth
- Do not use abrasive cleaning agents. solvents or polishes as they may damage the finish.,
FEELING CONFIDENT? START YOUR NEXT PROJECT
Visit lowes.com for more information
PREPARATION
- Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 30 minutes
TOOLS REQUIRED (NOT INCLUDED)
PACKAGE CONTENTS
HARDWARE CONTENTS
INSTALLATION OVERVIEW
- Remove rods from brackets.
NOTE
For larger width windows, two people may be needed for easier installation.
-
Place brackets against wall at desired locations and mark screw holes with a pencil. Use a tape measure and level to make sure marked screw holes are horizontal to each other.
-
For mounting to drywall and paneling: Pre-drill two pilot holes for right bracket (1/4 in. drill bit) and insert anchors into pilot holes. Place screws through right bracket and into anchors. Screw in until tight.
NOTE
For mounting to wood or studs, anchors (BB) are not needed.
- Repeat the instructions in Step 3 for the center and left brackets. Slide the telescoping rod through the center bracket. Feed one drapery panel through the rod from the opening on the left. Screw the left rod into the left bracket.
NOTE
Adjust telescoping rod, to fit the width of your window./
-
Feed the second drapery panel through the rod from the opening on the right and screw the right rod into the bracket.
-
Wrap the drapery panels around both ends of the bracket.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>