ADLER AD 2105 Curling Iron User Manual

June 4, 2024

ADLER logo AD 2105 Curling Iron
User Manual ADLER AD 2105 Curling Iron

AD 2105 Curling Iron



  1. Before using the product please read carefully and always comply with the following instructions. The manufacturer is not responsible for any damages due to any misuse.
  2.  The appliance is intended for domestic use only. Do not use the product for any purpose that is not compatible with its application.
  3. The applicable voltage is 220-240V,-50/60Hz. For safety reasons, it is not appropriate to connect multiple devices to one power outlet
  4. Please be cautious when using around children. Do not let the children to play with the product. Do not let children or people who do not know the device to use it without supervision.
    1. After you are finished using the product always remember to gently remove the plug from the power outlet holding the outlet with your hand. Never pull the power cable!
  5. Never put the power cable, the plug, or the whole device into the water. Never expose the product to atmospheric conditions such as direct sunlight or rain, etc.. Never use the product in humid conditions (bathrooms, cabin houses).
  6. Periodically checks the power cable condition. If the power cable is damaged the product should be turned to a professional service location to be replaced in order to avoid hazardous situations.
  7. Never use the product with a damaged power cable or if it was dropped or damaged in any other way or if it does not work properly.
  8.  Do not try to repair the defective product yourself because it can lead to electric shock. Always turn the damaged device to a professional service location in order to repair it. All the repairs can be done only by service professionals. The repair that was done incorrectly can cause hazardous situations for the user.
  9. Never use the product close to combustibles.
  10. Never leave the product connected to the power source without supervision. Even when use is interrupted for a short time, turn it off from the network, and unplug the power.
  11. In order to provide additional protection, it is recommended to install a residue current device (RCD) in the power circuit, with a residual current rating not more than 30 mA. Contact a professional electrician in this matter.
  12. using the device in the bathroom after use remove the lower blue from the more now
  13. Do not allow the device to wet. If the device falls into water, immediately remove the power plug from the power socket. If the device is powered, do not put hands in the water. Has the device been checked by a qualified electrician before using it again?
  14.  Do not touch the device with wet hands.
  15.  The device has to be turned off after every use.
  16.  Do not leave the device unattended when plugged in.
  17.  Keep the device out of the reach of children. Using the devices by children must be supervised by adults.
  18.  The power cord should not touch hot parts of the device and should not be located near other heat sources.
  19.  Do not wrap the electric cable around the device.
  20.  Do not use the appliance in the bath.
  21.  Do not remove dust or foreign bodies from the inside of the device using sharp objects.
  22.  Do not use outdoors or where aerosols are being used or where oxygen is being administered.
  23.  Do not cover the appliance, it might cause the accumulation of heat in its interior and it may cause damage or fire.
  24.  Hairsprays contain flammable materials. Do not apply them while using the device.
  25.  Do not use the device on people who are sleeping.
  26.  During operation, do not put the device on a wet surface or on a surface that is sensitive to heat and high temperatures.
  27.  After use, turn off and unplug the unit. Wait until the device cools down before storing it.
  28.  The heating elements reach high temperatures during operation. Do not touch hot parts of the device with bare hands and do not allow it to come into contact with the Scalp, as this may cause burns.
  29.  The device is not intended to be operated with external timers or a separate remote control system.


  1.  On/off power button
  2.  Temperature adjustment +/- (100°C… 180°C… 210°C)
  3.  Display
  4.  Ceramic coated barrel
  5.  Clamp
  6.  Lever
  7.  Stand


To achieve the best results in hair curling, use a device on washed, brushed and dry hair. To prevent hair damage, make sure to use the correct temperature setting for your hair type.

  1.  Before starting power cord should be fully unrolled.

  2.  Insert the plug into the power socket. The LCD temperature display will turn on and show an “OFF” sign.

  3.  Press the On/Off power button (1) until the curling iron shows “180°C” and starts heating up to this value.

  4.  Adjust the temperature using temperature adjustment buttons +/-(2). During heat-up time, the LCD temperature display (3) will start flashing until the desired temperature is reached. The display will stop flashing when the curling iron is ready to use.

  5.  Start with separating a strand of hair.

  6.  Open the clamp (5) using the lever (6). Place the strand of hair so that the hair ends to protrude slightly beyond the clamp. Close the clamp (5).

  7.  Wind the hair strand around the curling iron wand, starting at the hair tips and moving closer to the head.
    CAUTION:  Avoid touching the head skin with the curling iron- this may cause burns.

  8.  For a heavy curl effect, keep the strand of hair wound around the curling iron wand for +/- 10 seconds or for a shorter time for light curls or crimped hair.

  9.  After use, click twice the On/off power button (1) to remove the temperature lock. Then press the On/off power button (1) longer until the device switches off showing OFF sign. Then unplug it from the power source.

The device has a temperature lock function. The padlock icon shows up after 4 seconds without pressing any buttons. To disable the lock function quickly press the On/off power button (1) twice.
NOTE: If you feel that the curling iron is not responding, always check if the lock icon is on.

You can change between Fahrenheit (°F) and Celsius (°C) Scales. If the lock icon is on press the On/off button (1) twice to disable the lock function. Then press at once temperature adjustment buttons+ and-(2). The scale will change.


  1.  Prior to cleaning, unplug the device from the power source and wait until it is cool to the touch.
  2.  Clean the body of the device with a moist cloth. Never immerse the device in water or other liquids.
  3.  Do not wind the power cable around the device.


  • Power supply:220-240 V-50/60Hz
  • Nominal power: 60W
  • Max Power: 300W

Read more: manual#ixzz7fGcpex6i

Read User Manual Online (PDF format)


Download This Manual (PDF format)

Download this manual  >>

ADLER User Manuals

Related Manuals