Lorelli Bellissimo Feeding Chair Instruction Manual

**Lorelli Bellissimo Feeding Chair Instruction Manual

**

Scan the QR code to get more product information and manual instruction in more languages. Download QR Scanner App onto your device.

IMPORTANT! READ CAREFULLY AND KEEP FOR FUTURE REFERENCE!

SAFETY REQUIREMENTS

1. WARNING! Never leave the child unattended!
2. WARNING! Always use the restraint system !
3. WARNING! Falling hazard : Prevent your child from climbing on the product!
4. WARNING! Do not use the product unless all components are correctly fitted and adjusted!
5. WARNING! Be aware of the risk of open fire and other sources of strong heat in the vicinity of the product!
6. WARNING! Be aware of the risk of tilting when your child can push its feet against a table or any other structure!
7. WARNING! Do not use the high chair until your child can sit up unaided!
8. WARNING! Do not use the high chair if any parties broken, torn or missing!
9. WARNING! To avoid injury ensure that your child is kept away when unfolding and folding this product!
10. WARNING! This product is intended for children able to sit up unaided and up to 3 years or maximum weight of 15 kg!
11. WARNING! Periodically check the buttons and harness system for safety !
12. WARNING! Always use the chair on afloat even surface !
13. WARNING! Keep the chair away from children when don’ truest!
14. WARNING! The chair must note used as atopy !
15. WARNING! Make sure that the restraint system s correctly fitted!
16. WARNING! This product contains small parts in its unassembled state! Adult assembly is required!
17. WARNING! Always apply the parking device when the product is not being moved.
18. WARNING! Images on the title page and in the instruction manual are only illustrative and may differ from the real product.
19. WARNING! Before using the product for the first time, remove all advertising material from it as well as the materials used to attach them to the product.

CLEANING AND CARE

1. Clean all fabrics with warm water and mild soap. Let them dry.
2. Heavy dirty spots clean with non abrasive cream.

PARTS

Picture P

1. Seat with soft pad /1 pe./
2. Footrest /1 pc./
3. Leg’s bases /2 pcs./
4. Wheels /4 pos./
5. Legs with height adjusting device left and tight /2 pes./
6. Toy Basket /1 pc./
7. Feeding Tray /11 pc./
8. Movable Tray /1 p./

ASSEMBLING

FRAME

1. Unpack the frame.

2. Press both buttons on the rear tube and slide them down to open the rear tube

3. Remove the end plugs from the pipes (and put front and rear tube into bases, facing inside with holes. (Fig. 2)

4. Using the parking device – Activate the parking device by pressing the wheel button. Deactivate the parking device by lifting the wheel button. photo *P” position 3.1 Warning: Always turn on the parking device for each individual wheel

SEAT

1. Hook the seat onto the seat support located on top of the frame. Make sure the attaching elements are properly engaged.(fig. 1)
2. Insert part of footrest ( fig. 4a)

MOUNTING OF THE BASKE T

1. Hang the two straps of the basket on the hooks situated on both sides of the seat. (Fig. 8)

2. Attach the other two straps around the pipe situated behind the footrest fig. 1a

TRAY

1. Hold the adjustment mechanism in the middle of the tray and pull out. (fig. 6)

2. The tray can be adjusted in 3 positions.

3. The tray can be taken out and placed on buttons of the rear legs. (Fig.8)

4. RECLINE BACKREST

5. Pull the backrest adjustment lever upward to release the backrest.

6. Adjust the seat and engage the lever in the new position. (Fig.3)

7. The backrest can be adjusted while your child is on the seat.

ADJUSTING THE HEIGHT OF THE SEAT

1. Stand in front of the high chair. (Fig. 5)

2. Press and hold the two buttons under seat at the same time.

3. Lift or lower the seat to desired position.

4. Release the buttons to secure the seat at the required heigh

FOLDING THE HIGH CHAIR

1. Unfasten restraint harness and remove your child from the high chair.
2. Stand behind the high chair. Move your body down, press two buttons on either side of rear tube and push the rear tube upward until click to indicate that the high chair is secured in folded position.
3. Remove the tray and hang it up on the rear tube. (Fig.8)

WARNING: Both sides arms of the seat can not be lifted up! Do not try to lift them, because this will cause their breakage, which is not covered by the warranty.

USING OF THE SEAT BELT
Warning: To avoid serious injuries always use seat belt ! Put the shoulder and waist belts together and place them in the central buckling clasp. Regulate the length of the safety belts by pulling the clasps all the way. To unlock the belts, press the button on the central clasp. In the back and seat there are openings for moving the safety belts to a different height and length depending on the child’s age. Pull the rear end of the belt all the way and run through the opening to get the belt out. Place the belt in the desired opening. Place the safety belts in the respective openings so that the child is not sitting or leaning on to them! (Fig. 9)

designed in EU
www.lorelli.eu
find us on

Didis Ltd.
Bulgaria, Shumen, 6 Trakia-iztok Street
Phone: +359 54 850 830
e-mails: home.market@didis-ltd.com;
export@didis-ltd.com

References

• Lorelli - Baby and children products with proven quality

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>