Lindby 8032370 34W LED LED Board Instruction Manual
- June 12, 2024
- Lindby
Table of Contents
Lindby 8032370 34W LED LED Board
Product Information
- Product Name: 34W LED Ceiling Lamp
- Model Number: L9001113
- Revision: 2.1
- Barcode (EAN): 4251911715095
- Input Voltage: 220-240V ~ 50Hz
- Intended Use: Stationary indoor use as a ceiling lamp
- IP Rating: IP20 (protected against solid objects greater than 12.5mm, no protection against water)
Product Usage Instructions
- Ensure the power supply is turned off before installation.
- Identify a suitable location on the ceiling for mounting the lamp.
- Open the package and check the contents. The package should include:
- 1 x Ceiling Lamp (34W LED)
- 1 x Mounting Hardware
- 1 x Mounting Instructions
- Review the mounting instructions carefully.
- Attach the mounting hardware to the ceiling according to the instructions.
- Connect the live conductor (L) and the neutral conductor (N) of the power supply to the corresponding terminals of the lamp.
- Ensure proper grounding by connecting the earth conductor (Schutzleiter) to the appropriate terminal of the lamp.
- Securely mount the ceiling lamp onto the installed hardware.
- Turn on the power supply and test the functionality of the lamp.
Note: This product is intended for indoor use only. Do not use it in outdoor or wet environments. If you are unsure about the installation process or have any questions, consult a qualified electrician.
Intended use
Provided for stationary indoor use on ceilings
Safety Precautions
Package contents
- 1 Ceiling lamp
- Installation hardware
OFF
ON
- Live conductor
- Earth conductor
- Neutral conductor
This product contains a light source of energy efficiency class F
Replaceable (LED only) light source by a professional.
Replaceable control gear by a professional.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>