MONSTER Airmars XKT13 True Wireless Bluetooth Headphone Instruction Manual

MONSTER Airmars XKT13 True Wireless Bluetooth Headphone Instruction Manual

Product parameters

• Bluetooth version: V5.3
• Transmission distance: 10m
• Driver diameter: Φ13mm
• Driver impedance: 16Ω±15%
• Sensitivity: -106±3dB 20Hz-20kHz
• Frequency response: 200mAh 3.7V
• Battery capacity(Charging case): 200mAh 3.7V
• Battery capacity(Headphone): 25mAh 3.7V
• Charging time(Charging case): ≈1.5 hours
• Music playtime(Headphone): ≈4 hours
• Music playtime with charging case: ≈15 ho

Product Schematic Description

• *Headphone2
  **

• *Instructions Manual1
  **

• *Charging case1
  **

• *Type-C Charging cable1
  **

Headphone

Charging case

Charge the charging case

Connect the charging case to the 5V power adapter with Type-C charging cable.

Rated input: 5V 20mA(Headphone)
Rated input: 5V 180mA(Charging case)

TIPS: When charging case closed and the LED flash Ice blue light 5 times,pls charging the charging case.

Indicator guide

“Disconnected”
Low Battery| | “Battery low”
Headphones placed in charging case| The indicator LED of headphones stay on blue when fully charged it goes out|
Charging case low power| Ice blue lights flicker|
Charging case charged| blinking red lamp|
Charging case fully charged| Red LED stayed on| _

Product operating instructions

1. Power on
   Method 1：Open the charging case,the headphones will turn on automatically.
   Method 2：Long touch the MF button of the headphones for 3s to turn on the headphones.

2. Power off
   Method 1：Put the headphones into the charging case ande close the cover.
   Method 2：After disconnected from the Bluetooth device for 3 minutes.

3. Pairing
   Step one: Open the charging case, the headpnones will start pairging automatically.
   Step two: Search and click for”Monster Airmars XKT13″on the Bluetooth list of the smart device,and when connection is successful,”Connected”will be heard.

Headphones will try reconnecting to the device within 3 minutes when connection is lost

NOTE:

• Fully charge the headphones and power off before an intended not-in-use period.
• Unplug the charging cable after charging.

Operation

Normal

Music playback

Phone

Game/Music switching : Device connected

Restore factory settings

When you turn on the headphone, make sure it does not connect to any Bluetooth device, and click the MF button 5 times to clear the pairing record, then turn off the headphone.

Precautions

1. Headphones will turn on automatically(needless to press any button) pair and connect the device when the charging case is opened. After placing the headphones in the charging case, they will turn off and automatic charging will start when the cover is closed.
2. Charging every 15 days will extend battery life when not in use often. Cleaning off dirt on the charging contacts by cotton swabs with alcohol will maintain a good contact for charging.
3. Keep battery(battery pack)away from inflammables or excessive heat such as direct sunlight.Do not disassemble, hit, squeeze or fireMedium. If severe swelling occurs, do not continue using. Do not place in high temperature environment. Do not use after soaking water.
4. Intermittent is normal during playback for wireless products due to environmental factors, device brand, users’ behavior, etc.

Warnings

1. Do not use headphones at high volume for an extended perios of time.
2. Keep the headphones away from dust and water.
3. Do not disassemble the headphones and accessories, otherwise warranty will be voided.
4. Keep headphones away from any impact or vibration.
5. Do not use any chemical solvents or cleaning agent on the headphones

This table is compliled according to SJ/T 11364

O: Indicates that this hazardous substance contained in all of the homogeneous materials for this part is below the limit requirement in GB/T 26572.
X: Indicates that this hazardous subatance contained in at least one of the homogeneous materials used for this part is above the limit requirement in GB/T 26572.

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC Rules.

Operation is subject to the following twoconditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction

FCC ID: 2A8PV-QSMXKT13

Environment Friendly Use Period(EFUP)

This logo refers to the period (10 years) during which the hazardous substances in electronic and electrical produsts will not leak or mutate so that the use of these [substances] will not result in any severe environmental pollution, any bodily injury or damage to any assets.

Warranty Service

Dear user, this warranty card is the proof of your future warranty application, please cooperate with the seller to fill it out and keep it for future use!

User info

User name:
Contact number:
Mailing address:
Email:
Postal code:

Product information

Product name:
Product number:
Product barcode / Serial number / Batch number:

Vendor information

Name:
Address:
Contact number:
Sales date:
Postal code:
Invoice number:
Remark:

Certificate of Approval
Product No:
Production Time:

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>