media-tech MT3163 Wireless Speaker User Manual
- June 12, 2024
- media-tech
Table of Contents
tech MT3163 Wireless Speaker
User Manual
MT3163
Introduction
Thank you for buying this multifunctional mobile audio device with karaoke function. Please take a moment and read this manual before using the device.
Front view
- Microphone input socket
- Charger input socket (DC5V, 1 A) and charger LED
- Aux input socket
- Microphone2 input socket
- microSD card slot
- USB socket
- Mode button (hold to switch illumination ON/OFF)
- Rec button
- EQ select
- Next track
- Pause/Play
- Previous track
- Volume control (Power ON/OFF)
- Status display
Remote control
- Standby
- Repeat mode
- Mode shift: Blue tooth/AUX-in/FM/USB/CARD
- Previous track/radio channel
- Next track/radio channel
- EQ: normal/bass/pop/rock/jazz.
- Play/Pause
- Volume down
- Volume up
- Mute
- Numeric keypad
- Stop
*)not available for FM radio/Aux-in mode
Charging
Use supplied charger and plug into device charger socket. Full charging takes
ca. 6 hours. Device can be normally used during charging.
Note! Fully charge device before first use. Red LED during charging is
on, when battery is full LED goes off (LED will be on still if device is used
and charged at the same time).
Important! We recommend to perform 3 full charging cycles first in order
to format built-in battery.
Power on/off
Turn volume up to power on the device, turn volume down to minimum in order to
power off the device.
You can also use remote control to enable/disable standby mode.
Switching modes
Use MODE button to switch between modes: Bluetooth/CARD/USB/FM radio/AUX-in.
Actual mode is displayed on the status screen. Hold MODE button to switch
illumination on/off.
Volume control
Use volume knob to set volume level or use remote control.
Karaoke mode
Plug attached microphone into microphone input socket, set volume level as you
like. When background music is from AUX-in or Bluetooth for better karaoke
effect you can increase device volume level and decrease background music.
Bluetooth mode
Make sure you are switched into Bluetooth mode, use your smartphone and search
for Bluetooth devices. Select “MT3163” on the list to pair device. Device does
not require password. When pairing is successful you can open music
application. You can use buttons on the device or remote to play/pause, to
select previous/next track.
CARD/USB mode
In this mode you can use standard control like play/pause, next/previous
track, volume control. You can also set repeat one/all function, and select
one of defined EQ settings. You may also use numeric keyboy arid to enter
specific track.
Note! Device is always resuming play. If you want to play from beginning
enter manually first track “0001” or press STOP and then PLAY.
FM radio mode
Press and hold PLAY on the device for 2 sec to start autotuned function –
device will scan FM frequency and save radio stations. When scanning is
finished first station will be played, use PREVIOUS/NEXT track button to
switch radio station. You can shortly press PLAY button on the device to
mute/unmute. For better results use this mode outside.
AUX-in mode
In this mode you can only use volume control.
Recording mode
When you are in CARD/USB mode press and hold REC button, device will stop
playing music and will record microphone input, press again to stop. Function
requires to have microSD card or pend rive plug gad-in. Your recording will
be played back automatically. Short press REC button to jump to playback of
recorded files.
Since device is equipped in active microphone input function it can produce
little noise when main volume is at minimum level.
Due to continuous development specification and appearance of product are
subject to change without prior notice. For technical support please visit
www.media-tech.eu.
Device is equipped with built-in battery, please remember to charge it once a
week.
Environmental guidance:
The device is marked with the symbol of a crossed out waste container, in
accordance with the European Directive 2012/19/EC on waste electrical and
electronic equipment. Products marked with this symbol should not be disposed
of or disposed of after the end of their useful life together with other
household waste. The user is obliged to dispose of waste electrical and
electronic equipment by delivering it to a designated point where such
hazardous waste is recycled. The collection of this type of waste in separate
places and the proper process of their recovery contribute to the protection
of natural resources. Proper recycling of waste electrical and electronic
equipment has a beneficial effect on human health and the environment. In
order to obtain information on where and how to dispose of waste electrical
and electronic equipment in an environmentally safe way, the user should
contact the relevant local authority, the waste collection point or the point
of sale where he purchased the equipment. 
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>