Pyle PTA62BT Wireless Stereo Receiver Power Amplifier USER MANUAL

Pyle PTA62BT Wireless Stereo Receiver Power Amplifier

FOREWORD

Your New Pyle Amplifier gives you the power and versatility you need in a professional sound system. The amplifier’s wide frequency response makes it suitable for amplifying music or vocal program material.It can be used in meeting halls, houses, restaurants, schools,-stores, or for paging systems.
Please read this manual thoroughly before you attempt to set up and use the amplifier. It contains a range of installation suggestions as well as instructions to ensure safe usage. Installed properly, you can expect years of trouble-free service from this product.

WARNING: To reduce the risk of fire or shock hazards, do not expose this product to rain or moisture.
CAUTION: To reduce the risk of electric shock, do not remove the cover or back. No user-serviceable parts inside. Refer servicing to qualified personnel.

Danger: This symbol is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure, it may have sufficient magnitude to constitute a risk of electric shock to persons.
Warning: This symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

FEATURES AND CONTROLS

FRONT PANEL

BACK PANEL

• Main Power ON Switch
  • Switch ON or OFF The amplifier by using this switch.
• ECHO CONTROL
  • Turn the knob to adjust the MIC echo level.
• MIC 1 VOL & MIC 2 VOL
  • Turn the knob clockwise to increase the MIC volume.
• MIC 1 & MIC 2 Input Jack
  • KARAOKE MIC connected to these jacks.
• BASS AND TREBLE TONE CONTROL
  • Lets you boost or attenuate bass and treble for the desired sound.
• Master Volume
  • Adjusts main audio system volume level.
• Audio Source Switch
  • Audio Source Switches between AUX1 input, AUX2 input, BT/FM/USB/SD
• Independent Channel Volume Controls
  • Adjusts audio volume levels for connected input(s).
• SD/MMC Socket for playing SD/MMC cards
• USB Charge Port & USB Reader Function
  • USB port for smartphone charging and USB reader function.

Buttons for Bluetooth/MP3 (USB and SD) Function Control

• MODE Button: For audio selection like BLUETOOTH/USB/SD/LINE IN
• PLAY/PAUSE BUTTON: Play and Pause control button
• PREV/NEXT: Quick backward or next song
• Blue LED DIsplay WIndow for MP3/Bluetooth Function
• Headphone Control
  • 5mm headphone input jack with independent rotary volume control.
• Line Input AUX/CD IN
  • Connect the MP3 Device (player) sources such as PC (CD ROM), laptop, walkman, iPod and mobile phone
• Microphone Talk-Over
  • Switch-activated function allows for direct audio integration with connected microphone (MIC1).
• AC IN Power Cord
  • Connect to AC 110V/60Hz or 220V/50Hz
• Push Type Speaker L/R Terminals
  • Connect the speaker wires directly to the ampli_er
• Stereo Subwoofer Output
  • Connect to subwoofer system from these terminals
• Stereo Recording Function Output
• RCA L/R LINE Input
  • Connect to desired LINE input sources.
• 110V/220V Switch
  • According to power voltage, push this button to the 110V or 220V correct station.
• Bluetooth Antenna
  • Bluetooth receiver

REMOTE CONTROL FUNCTION

1. Power ON Button

2. Play/Pause Button

3. Equalizer Button

4. Repeat Song Button

5. MODE: Menu Control Button
   Press to select BT/USB/SD/LINE IN etc audio input

6. MUTE Button

7. Previous Song Button

8. Next Song Button

9. Volume + and Volume – Buttons

10. USB/SD Switch Button

11. Number Buttons for Song Selection

BLUETOOTH OPERATION INSTRUCTION:

External devices which have a built-in Bluetooth feature can be connected to this amplifier wirelessly to play through the amplifier’s speakers. If your amp is connected to speakers, you will hear audible tones which will help for connecting.

1. At first be sure that the amplifier is powered on, and turn the volume to low. Please remember to connect the Bluetooth Antenna at the back panel for better receiving signal.
2. Press the BT/Line button switch in on the front panel, you will hear the voice “POWER ON” and also “PAIRING”, and then the unit is automatically ready to pair with your external device.
3. Turn on the Bluetooth of your external device.
4. Search for available Bluetooth devices and make sure to be within range of your amp, and wait for your device to select “BT-RY” on the pairing devices lists of Bluetooth networks.
5. Once connected you will hear a voice say, “Your Device is Connected”, the Bluetooth pairing is successful and connected.
6. You can now play music on your external device through the amplifier.

CARING FOR YOUR PYLE AMPLIFIER

Your Pyle Amplifier is an example of superior design and craftsmanship.The following suggestions will help you care for your amplifier so you can enjoy years of use:

• Keep the amplifier dry. If it gets wet, wipe immediately.
• Use the amplifier only in well-ventilated installations.
• Handle the amplifier away from dust and dirt.
• Wipe occasionally with a damp cloth to  keep it looking new. Do not use harsh chemical, solvents or detergents!

Replacing a fuse

This amplifier requires fuse with the proper rating for protection from  power surges and short circuits. If the amplifier suddenly turns off or would not turn on, the fuse is properly blown.

• Let the amplifier cool down and see if it starts again before you assume a fuse needs to be replaced.
• Unplug the amplifier from the AC outlet.
• Turn the fuse holder cap and pull out the cap.
• Remove the old fuse and replace it with an identical one.

CAUTION: Never use a fuse with a higher rating

**TROUBLESHOOTING

**

**SPECIFICATIONS

**

FAQs

What does a power amplifier’s stereo mode do?

Amplification devices work regularly and by design in stereo. This shows that the amplifier separately powers two different channels. Think of it as two amps combined into one. Many contemporary amplifiers can even run two channels simultaneously while having two different power/resistance ratings.

What distinguishes an amplifier from a receiver?

The main difference between a receiver and a “regular” integrated amplifier with regard to sound systems is that a receiver has a built-in radio part, whilst an amplifier does not. In theory, all receivers are amplifiers (with radio functionality), but not all amplifiers are receivers.

Without pre-outs, how can I attach my power amp to the receiver?

To do this, connect an HDMI cable to both the HDMI input port on the extractor and the HDMI output port on the receiver. You can connect your power amp or AV amp straight to the analogue outputs by using the audio extractor to convert the digital audio stream.

Is the subwoofer’s output a “preamp”? Is a powered subwoofer compatible?

A powered subwoofer can be connected to the Output port. See the whole list of specifications for the device on our website, pyleaudio.com. Enter the model number PTA42BT in the search bar to find out more.

How can my television be connected?

The unit’s rear has an RCA Input port that you can use. See the whole list of specifications for the device on our website, pyleaudio.com. Enter the model number PTA62BT in the search bar to find out more.

Can I use this amplifier to connect to a mixer?

You can, of course. For additional details, please visit our website at pyleaudio.com. After the model number in the search box, type PTA62BT.

Can I use different speakers separately?

I now have two speakers on A, one on C, and one on D. I want to install or hang B in my garage with an extremely powerful amp and add two more speakers.

Includes eight maritime speakers with a 180-watt total output with a 4-ohm nominal impedance. Will they be able to utilize this receiver independently at the same time?

This device only supports 4 speakers connected at once. If you wanted to connect 8 speakers, then use our PSS8 speaker selector. Additionally, the device can accept 500 watts (125 watts per channel). See the whole list of specifications for the device on our website, pyleaudio.com. Enter the model number PTA62BT in the search bar to find out more.3

Can a power amp be connected to a receiver?

An RCA cable, a speaker connected to the amp, and a speaker wire are all needed to connect a power amp to an AV receiver and transfer audio from the amp to the speaker.

What kind of power amplifiers are there?

Depending on the type of output device they are connected to, power amplifiers fall into one of the following three categories: audio power amplifiers. Signal amplifiers for RF. power amplifiers for DC.

What is the purpose of a stereo receiver?

The audio amplifier and switching element of a stereo system. The receiver, which includes outputs for one or more speaker systems, may accept plug-ins from all audio sources and sources. It might also include an AM/FM tuner.

Is a power amp usable without a preamp?

To supply the line level signal needed by a power amp, a preamp is necessary. Active speakers can be connected straight from a preamp without the need for an additional external power amplifier. Only in active speakers, where each driver has a built-in power amplifier. It wouldn’t work with passive speakers.

Do speakers require amplification?

It is very amazing how speakers can convert electrical audio impulses into sound waves for our enjoyment (or displeasure). All speaker kinds, from tiny smartphone speakers to huge live sound subwoofers, require amplifiers.

How can I link my Bluetooth device to my Pyle amplifier?

The gadget will link once you select the “Pyle Speaker” Wireless BT name. E. After pairing, you can play music from your Bluetooth device. You can select songs from your Bluetooth device using the device’s control buttons as well.

How can I link my receiver and amplifier?

To add an integrated amplifier to the AV receiver, locate the pre-out area and attach RCA cables to the Left and Right channels. Last but not least, connect your speaker wire to the built-in amplifier to start making a sound.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>