SENSORWORX SWX-864-ELV-WH Single-Pole Phase Dimmer and Switch Owner’s Manual
- June 12, 2024
- SENSORWORX
Table of Contents
SENSORWORX SWX-864-ELV-WH Single-Pole Phase Dimmer and Switch
OVERVIEW
The SENSOR WORX phase dimmer provides manual dimming control of 120V lighting from a single location. With no minimum load requirements, this stand alone dimmer is perfect for any lighting zone. Additionally, at less than one inch deep, the unit is significantly shallower than typical dimmers. This results in less crowded wall boxes and quicker installation. All SENSOR WORX products are proudly made in the USA.
FEATURES
ELECTRICAL FEATURES
- Dims LED, CFL, ELV, & Incandescent Lighting Loads
- Selectable Reverse (default) and Forward Phase Dimming in Same Unit
- No Minimum Load Ratings – Relay Based Switching (i.e. non-Triac)
- Overload Protection Monitors & Protects Unit from Overheating
PHYSICAL FEATURES
- Enclosure is 25-40% Shallower than Other Dimmers (< 1” Depth into Wallbox)
- Modern Look and Individual Easy-Tap Buttons for On, Off, Raise, & Lower
- Matches Styling of other SWX Wall Devices
- Self-Grounding Mounting Strap
- Blue Locator LED when Lights are Off
OPERATIONAL FEATURES
- White LED Indicator Changes Intensity as Dim Level is Adjusted
- Configurable Dimming Parameters including High/Low Trims, & Turn on Levels
- Programmable Dimming Curves
- Settings are Adjustable without Removing Cover Plate
- Unit Retains Level Setting after Power Outage
SPECIFICATIONS
ELECTRICAL
OPERATING VOLTAGE
120VAC, Single Phase, 50/60 Hz
LOAD RATINGS
MAX: 150W CFL/LED 375W ELV 375W Incandescent/Halogen MLV (consult factory)
MIN: None
LOAD TYPES
Electronic Low Voltage LED Driver/Lamps CFL, Electronic/Magnetic Ballasts
(Fluorescent) Tungsten (Incandescent) Halogen MLV (consult factory)
ESD IMMUNITY
Tested to withstand electrostatic discharge without damage or memory loss.
SURGE IMMUNITY
Tested to withstand surge voltages without damage or loss of operation.
NON-VOLATILE MEMORY
Saves all settings even if power is disrupted.
PHYSICAL
SIZE
2.74”H x 1.68”W x 1.39”D (6.96 x 4.27 x 3.53 cm) <1” Wallbox Mounting Depth
WEIGHT
4.5 oz
MOUNTING
Single Gang Switch Box
LED STATUS INDICATOR
Bi-color White & Blue
ENVIRONMENTAL
OPERATING TEMP
32°F to 86°F (0°C to 30°C) (for full load operation)
RELATIVE HUMIDITY
0-95% Non-Condensing Indoor Use Only
ORDERING INFO
SAMPLE MODEL # SWX-864-ELV-WH
PRODUCT DESCRIPTION| **COLOR***|
PACKAGE COUNT
---|---|---
SWX-864-ELV| Single-Pole Phase Dimmer & Switch, 120VAC – Reverse Phase (for
Electronic Low Voltage/LED/CFL/ Incandescent/Halogen) or Forward Phase| White|
– WH| Gray| GY| Single Pack| Blank
Ivory| – IV| Black| BK| 10 Pack**| -J10
Light Almond| -LA| | | |
ACCESSORY PART #
| COLOR|
PACKAGE COUNT
---|---|---
SWX-199| Single Gang Wall Plate| White| Gray| – GY| 10 Pack** –| J10
Ivory| Black| – BK
Light Almond| | | |
WIRING
DIMMING FROM A SINGLE LOCATION
DIMMING FROM MULITPLE LOCATIONS (e.g. 3-way)
This phase dimmer is not designed for installation or usage in multiway (e.g. 3-way) applications. For dimming in those applications, the SENSOR WORX wireless phase dimmer (model series SWX-874) and a wireless companion dimmer (model series SWX-854) is required.
INSTALLATION
- Designed to mount in 1-gang wall box with 3.28” hole spacing.
- Units can also share multiple gang wall boxes with other devices.
- Unit face is field removable in order to change colors. Contact factory for additional faces.
CUSTOMERS SUPPORT
SENSORWORX | 2a Research Parkway, Wallingford CT 06492
203.678.4224 | www.sensorworx.com
© 2022 BLP Technologies, Inc. All rights reserved.
Five-Year Limited Warranty.
Complete Warranty Terms Located at:
sensorworx.com/warranty
DATA864 | REV 001–220920
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>