StarTech TABLET-VESA-ADAPTER Vesa Mount Adapter for Tablets User Guide
- June 4, 2024
- StarTech
Table of Contents
StarTech TABLET-VESA-ADAPTER Vesa Mount Adapter for Tablets
Product Diagram
Component/Function
- Clamp
- Attach the Tablet to the Tablet Mount Adapter
- Body
- Frame of the Tablet Mount Adapter
- VESA Bracket
- Attach the Tablet Mount Adapter to a compatible VESA Mount
- Lock
- Prevents opening the Tablet Mount Adapter to remove the tablet
- Weighted Plate
- Adds additional weight for Monitor Mounts that have a minimal weight capacity
Package Contents
- Tablet Holder x 1 (0.47 lb / 215 g)
- Weighted Plate x 1 (0.77 lb / 350 g)
- Keys x 2
- Star Bit Tool x 1
- M4x8 Tamper Resistant Screws x 4
- M4x10Tamper Resistant Screws x 4
- Washers x 4
- Quick-start Guide x 1
Requirements
For the latest manuals, product information, technical specifications, and
declarations of conformance, please visit: www.startech.com/TABLET-VESA-
ADAPTER
- Monitor Mount with a VESA 75×75 or 100×100 patterns
- A tablet with a display size from 7.9 in to 12.5 in diagonally
Installation
WARNINGS: Do not exceed the weight capacity of this product. Overloading this product might result in injury or property damage. This product can support the following weight: up to 4.4 lbs (2 kg). Ensure the Tablet has been properly secured before use and/or adjustment.
Attach the Tablet Mount Adapter to a Monitor Mount
The VESA Bracket is compatible with VESA patterns 75×75 and 100×100 mm.
Certain Spring-Assisted Monitor Mounts require a minimum weight to
counterbalance the spring mechanism, if this is being used with one of those
mounts, follow the appropriate step below.
Non-Spring Assisted Monitor Mounts
- Place the Washers (x 4) on the M4x8 Tamper Resistant Screws.
- Align the holes located on the VESA Bracket, with the holes, located on the Monitor Mount.
- Insert the M4x8 Tamper Resistant Screws (x 4) through the Monitor Mount and into the and VESA Bracket, tighten using the Star Bit Tool.
Spring-Assisted Monitor Mounts
- Place the Washers (x 4) on the M4x8 Tamper Resistant Screws.
- Gently place the Weighted Plate over the VESA Bracket and ensure the holes located on the Weighted Plate, are aligned with the holes located on the VESA Bracket.
- Align the holes located on the VESA Bracket and Weighted Plate, with the holes, located on the Monitor Mount.
- Insert the M4x10 Tamper Resistant Screws (x 4) through the Monitor Mount and into the Weighted Plate and VESA Bracket, tighten using the Star Bit Tool.
Attach a Tablet to the Tablet Mount Adapter
- Slide the Clamp outwards to accommodate the Tablet diagonally.
- Insert the opposite corners of the Tablet in the Clamp.
- Secure the Clamp, using the Lock and Key
Use of Trademarks, Registered Trademarks, and other Protected Names and
Symbols
This manual may make reference to trademarks, registered trademarks, and other
protected names and/or symbols of third-party companies not related in any way
to StarTech.com. Where they occur these references are for illustrative
purposes only and do not represent an endorsement of a product or service by
StarTech.com, or an endorsement of the product(s) to which this manual applies
by the third-party company in question. StarTech.com hereby acknowledges that
all trademarks, registered trademarks, service marks, and other protected
names and/or symbols contained in this manual and related documents are the
property of their respective holders.
Warranty Information
This product is backed by a 5-year warranty. For further information on product warranty terms and conditions, please refer to www.startech.com/warranty
Limitation of Liability
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their officers, directors, employees or agents) for any damages (whether direct or indirect, special, punitive, incidental, consequential, or otherwise), loss of profits, loss of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product. Some states do not allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations or exclusions contained in this statement may not apply to you.
StarTech.com Ltd.
45 Artisans Crescent
London, Ontario
N5V 5E9
Canada
StarTech.com LLP
4490 South Hamilton
Road
Groveport, Ohio
43125
U.S.A.
StarTech.com Ltd.
Unit B, Pinnacle 15
Gowerton Road
Brackmills,
Northampton
NN4 7BW
United Kingdom
StarTech.com Ltd.
Siriusdreef 17-27
2132 WT Hoofddorp
The Netherlands
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>