StarTech com LAPTOP-SIT-STAND Ergonomic Adjustable Laptop Sit Stand Desk Converter User Guide
- June 4, 2024
- StarTech com
Table of Contents
Ergonomic Adjustable Laptop Sit Stand Desk Converter
User Guide
Product Diagram (LAPTOP-SIT-STAND)
Component
|
Function
---|---
1| Slide Button| • Push-in to Raise or Lower the workstation
2| Workstation Surface| • Place a laptop, keyboard, and a mouse
3| Upper Frame| • Supports the workstation. Adjusts the Height in
Six Different Positions from 1.8 to 15.9 in (45 to 405 mm)
4| Lower Frame| • Stabilizes the workstation. Foam pads at the bottom
protect the desk surface
5| Finger Guard| • Helps prevent trapping your fingers when Lowering
the workstation
Package Contents
- Desktop Sit-Stand Workstation x 1
- Quick-Start Guide x 1
Requirements
For the latest manuals, product information, technical specifications, and
declarations of conformance, please visit: www.startech.com/LAPTOP-SIT-
STAND
Installation
WARNINGS!
Do not exceed the weight capacity of this product. Overloading this product
might result in injury or property damage. This product can support the
following weight: up to 17.6 lb (8 kg).
When adjusting the height of this product, ensure that the mounted equipment
is properly secured and the weight is supported until the locking mechanism is
fully engaged. Adjust the height at a slow speed to prevent any equipment
instability. Failure to follow these guidelines may result in property damage
and/or personal injury.
Stored Energy Hazard! This product contains a spring mechanism that can
cause the assembly and/or mounted equipment to move forcibly and quickly
upwards when the slide button is pressed.
Pinch Hazard! Keep your fingers clear from moving components. Do not
place your fingers past the finger guard at the bottom of the workstation
surface when lowering it.
- Cut the security plastic Tie that Holds the Upper Frame to the Lower Frame.
- Carefully Remove the foam Pad installed on the Slide Button.
Operation
When adjusting the height of this product, always use two hands to ensure a
controlled movement.
If the slide button is pushed in and without releasing, you can adjust the
height of the upper frame in one movement to any of the available height
positions. Until the slide button is released, the height of the upper frame
cannot be locked.
Due to the spacing of the locking holes, the user must continue to support the
workstation weight until the locking mechanism is engaged.
Raise or Lower the Workstation
- Position one hand on the Slide Button and the other hand on the opposite side of the Workstation Surface. (Figure 1)
- Push in the Slide Button while slowly adjusting the Height Position of the Workstation Surface. Release the Slide Button for the Upper Frame to lock in place on the next available Height Position.
Use of Trademarks, Registered Trademarks, and other Protected Names and
Symbols
This manual may make reference to trademarks, registered trademarks, and other
protected names and/or symbols of third-party companies not related in any way
to StarTech.com. Where they occur these references
are for illustrative purposes only and do not represent an endorsement of a
product or service by StarTech.com, or an endorsement of the product(s) to
which this manual applies by the third-party company in question.
StarTech.com hereby acknowledges that all trademarks, registered trademarks,
service marks, and other protected names and/or symbols contained in this
manual and related documents are the property of their respective holders.
Warranty Information
This product is backed by a 2-year warranty. For further information on
product warranty terms and conditions, please refer to
www.startech.com/warranty.
Limitation of Liability
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP
(or their officers, directors, employees, or agents) for any damages (whether
direct or indirect, special, punitive, incidental, consequential, or
otherwise), loss of profits, loss of business, or any pecuniary loss, arising
out of or related to the use of the product exceed the actual price paid for
the product. Some states do not allow the exclusion or limitation of
incidental or consequential damages. If such laws apply, the limitations or
exclusions contained in this statement may not apply to you.
Safety Measures
- Read the entire manual and ensure the instructions are fully understood before assembling and/or using this product.
StarTech.com Ltd.
45 Artisans Crescent
London, Ontario
N5V 5E9
Canada| StarTech.com LLP
4490 South Hamilton Road
Groveport, Ohio
43125
The U.S.A.| StarTech.com Ltd.
Unit B, Pinnacle 15
Gowerton Road
Brackmills, Northampton
NN4 7BW
United Kingdom| StarTech.com Ltd.
Siriusdreef 17-27
2132 WT Hoofddorp
The Netherlands
---|---|---|---
To view manuals, FAQs, videos, drivers, downloads, technical drawings, and
more,
visit: www.startech.com/support
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>