RHINO-RACK S512 Folding Kayak Carrier Instruction Manual

RHINO-RACK S512 Folding Kayak Carrier

Product Information

• The Folding Kayak Carrier S512 is a product designed to help you transport kayaks on the roof of your vehicle. It is important to ensure that you have the latest issue of the instructions by checking the Rhino-Rack website. The accessory must be installed correctly by referring to the fitting instruction. Check the contents of the kit before starting the fitment and report any discrepancies. After installation, place the instructions in the vehicle’s glove box. These instructions must be followed for warranty to be upheld.
• The carrying capacity of the Folding Kayak Carrier S512 is 45kg/99lbs. It is important not to exceed the vehicle manufacturer’s maximum roof carrying capacity. The weight of the roof racks, accessories, and kayaks must be included in the total vehicle roof load. All loads must be evenly distributed, and the center of gravity must be kept as low as possible. It is recommended to check all bolted connections each time they are re-fitted.
• The handling characteristics of your vehicle will change when transporting a load on the roof. Exercise extreme care when transporting wind-resisting loads, and special consideration must be taken into account when braking.

Product Usage Instructions

1. Check the Rhino-Rack website to ensure you have the latest issue of the instructions.
2. Refer to the fitting instruction to ensure that the accessory is installed correctly.
3. Check the contents of the kit before commencing fitment and report any discrepancies.
4. Place these instructions in the vehicle’s glove box after installation is complete.
5. Follow these instructions for warranty to be upheld.
6. Ensure that you do not exceed the vehicle manufacturer’s maximum roof carrying capacity.
7. Include the weight of the roof racks, accessories, and kayaks in the total vehicle roof load.
8. Ensure that all loads are evenly distributed and that the center of gravity is kept as low as possible.
9. Check all bolted connections each time they are re-fitted.
10. Exercise extreme care when transporting wind-resisting loads and take special consideration while braking.

Important:

1. Check the Rhino-Rack website to ensure you have the latest issue of these instructions.
2. Please refer to your fitting instruction to ensure that the accessory is installed in the correctly.
3. Check the contents of kit before commencing fitment and report any discrepancies.
4. Place these instructions in the vehicle’s glove box after installation is complete.
5. These instructions must be followed for warranty to be upheld.

Fit Time : 15 mins

MAX CARRYING CAPACITY

• 45kg / 99lbs

Check the vehicle owners hand book for your vehicle manufacturer’s maximum carrying capacity. Do not exceed the vehicle manufacturer’s maximum roof carrying capacity.
The weight of the roof racks, accessories, and kayaks must be included in the total vehicle roof load. Ensure that all loads are evenly distributed and that the centre of gravity is kept as low as possible

Warning

• Do not attempt to fit the accessory to your vehicle unless you fully understand these fitting instructions. Please direct any questions regarding fitting to the dealer from where the product was purchased.
• Off-road conditions can be much more rigorous. Extreme care must be taken in off road conditions.
• Accessory must be removed when vehicle is put through an automatic car wash.
• Long loads such as canoes/kayaks must be secured to the front and rear of vehicle with non-stretch fastening ropes/straps.
• Always ensure you fasten your load securely.
• Wash and clean roof racks prior to fitment

In service maintenance checks

• All bolted connections should be checked after driving a short distance when you first install your roof racks & accessories.
• All bolted connections should be checked again at regular intervals (every 1000k/621mi) is recommended, depending on road conditions, usage, loads and distances travelled). All bolted connections should be checked each time they are re-fitted

Torque Settings:
Unless stated otherwise in these instructions, all fasteners should be set to the following torque settings.

Sensitivity to Crosswinds, Behaviour in Curves and Braking.

• Remember that the handling characteristics of your vehicle will change when transporting a load on the roof.
• Exercise extreme care when transporting wind-resisting loads; special consideration must be taken into account when braking

Note for Dealers and Fitters
It is your responsibility to ensure these fitting instructions are given to the end user or client. These instructions remain the property of Rhino-Rack Australia Pty. Ltd. and may not be used or changed for any other purpose than intended

Product Dimensions

IMPORTANT WARNINGS

Parts List

Clamping System (Universal Fitment):

C-Channel:

Compatibility

Additional Fitments

KC – FK9: Rola Aero and Rola Commercial bar

How to install FIT KITS for C-Channel Fitments

For Clamping System fitments, skip to Step

HOW TO USE THE KAYAK CARRIER

Vortex Bar shown as example

How to install and use the optional S512X extension piece (Sold Separately )

Rhino-Rack AUSTRALIA 22A Hanson Pl, Eastern Creek, NSW, 2766
Rhino-Rack USA Unit D, 2450 Airport Blvd, Aurora, CO, 80011
RHINORACK.COM
Document No: R190
Issue No : 04
Issue Date : 10/01/2023

References

• Make Space For Adventure | Rhino-Rack US

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>