Rhino Mobility LLC C6D 6 Inch Dual SIM Android Enterprise Smartphone User Manual
- June 1, 2024
- Rhino Mobility LLC
Table of Contents
C6D User Manual
Product Overview
Assembling MicroSD Card (if applicable)
- Pull out the card holder on the left side of the tablet.
- Put the microSD card into the microSD card slot of the card tray, and then push the card tray into the tablet.
Assembling SIM Card (if applicable)
- Pull out the card holder on the left side of the tablet.
- Put the SIM card into the SIM card slot of the card tray, and then push the card tray into the tablet.
Assembling Battery
This device has a Non-removable battery,Do not attempt to remove the battery
or try to disassemble the tablet as this could result in personal injury.
Getting Started
Turning Tablet On/Off
To turn on tablet
- Press and hold the power key for a few seconds until you see the RHINO welcome screen.
To turn off tablet
- Press and hold the power key and volume up 2. Select Power Off.
Unlocking the Screen
The screen is locked by default when you turn on the tablet.
To unlock the screen-
- Press the power key.
- Place finger on center of screen and swipe up.
- If you previously set up an unlock security option, draw a pattern, use your fingerprint, or enter PIN.
Locking the Screen
To lock the screen, press the power key.
Note: It is recommended to lock the screen to protect your information
and reduce battery usage. You can set up your tablet to automatically lock
after a certain period of time. To do so, press finger on bottom-center of
screen, and swipe up to open All Apps. Tap Settings Display Screen timeout.
Fingerprint Sensor Security Option
To set up the Fingerprint Security Option, press finger on bottom-center of
screen, and swipe up to open All Apps. Tap Settings Security Fingerprint and
follow the on-screen instructions.
Note: After setting up the fingerprint option, please allow the tablet
display to go to sleep naturally (default is 1 minute) before the first use.
This process must be followed every time a fingerprint is changed.
Using Touch Screen
All of the functions of the tablet, except for power and volume, are performed
on the touch screen. The following finger actions may help you easily
understand how to use the touch screen.
- Tap: With your finger, touch an item (ie: application or widget) to run it, or access a menu or option.
- Double tap: Tap an item twice with your finger.
- Drag: Tap and hold your finger on an item, then slide it without losing contact with the screen.
- Swipe: Place your finger on an empty space of the screen and move the screen up or down or left or right.
- Pinch: Place two fingers on the screen and move them apart to zoom into a picture, document or webpage; or move them together to zoom out.
- Select and tap : Tap an item in the list of options available.
- Pre s s and hold: Press a key or any item for a few seconds until a list of options appears.
- Cautions: Do not use sharp tools that can scratch the touch screen.
Key Functions
Back Key
Tap to return to the previous screen and exit the running application. Tap to
close the on-screen keyboard in text input mode.
Home Key
Tap to return to the main screen. Tap and hold to open the Google search.
Recent Apps Key Tap to open the applications list used recently.
Screen Orientation
For optimal viewing experience, the screen orientation changes automatically
depending on how you hold the tablet.
Note: To enable or disable auto-rotate, place finger on top-center of
screen, and slide down to view Status and Notification panel, then tap the
Auto-rotate icon.
Status Bar
The Status bar at the top of the screen includes notifications from various
apps, current time, and the states of various items such as battery status,
WLAN status, Signal status, and so on.
Status and Notification Panel
The Status panel displays status icons to show the current state of your
tablet, such as battery charging progress, alarms, Bluetooth, and so on.
The Notification panel displays notification icons to inform you of new email,
messages, and so on.
To view both panels, place finger on top-center of screen, and slide down,
then tap an icon to view details.
Apps and Widgets
Apps: Software that allows you to perform a specific task. Your tablet is
preloaded with a variety of applications, and additional applications can be
downloaded from the Play Store.
Widgets: A small application which resides on the home screen and
provides quick and easy access to information.
Connecting to The Internet Using Wi-Fi
Note: The range and quality of the WiFi signal is affected by the
distance between the tablet and the wireless router, the number of connected
devices, infrastructure, and objects through which the signal is transmitted.
- Press finger on bottom-center of screen and swipe up to open All Apps.
- Tap Settings Network & internet Internet Wi-Fi.
- Drag the slider to the On position.
- Tablet will scan for WLAN networks in range.
- Tap the network you want to connect to.
- Type a password (if connecting to a secure network).
- Tap Connect to connect to the selected WiFi network.
Connecting to The Internet Using Mobile Broadband
- Press finger on bottom-center of screen and swipe up to open All Apps.
- Tap Settings Network & internet InternetWi-Fi.
- Drag the slider to the Off position.
- The tablet will search for the carrier signal and connect to the network. When the tablet is connected to a mobile broadband network, the network type appears in the status bar.
Note: On the LTE/HSPA+ models, if both WiFi and mobile broadband networks are available, the tablet gives priority to WiFi connection.
Tablet Maintenance/Safety
The following list shows how to maintain your tablet, together with
precautions to take.
- Keep your tablet and its accessories out of the reach of pets.
- If children use the tablet, make sure that they use it properly.
- Maintain your tablet in dry conditions and keep it within normal operating temperatures.
- Do not try to dry your tablet in a microwave oven. If you do, sparks can occur and cause an explosion or fire.
- Do not use or store your tablet in dusty, dirty or wet areas.
- Do not attempt to disassemble your tablet.
- Do not drop or cause severe impact to your tablet.
- Do not sit on or apply pressure to tablet.
- Do not use chemical products, cleaning solvents or detergents to clean your tablet.
- Use only authorized batteries, battery chargers and accessories. Any malfunction or damage caused by the use of unauthorized batteries, battery chargers and accessories will void the limited product warranty. Ensure that the battery charger does not come in contact with conductive objects.
- The battery is not fully charged when you take it out of the box. Do not remove the battery pack when the tablet is charging.
CE Statement
- The adapter shall be installed near the equipment and shall be easily accessible.
- Do not use the mobile tablet in the environment at too high or too low temperature, never expose the mobile tablet under strong sunshine or too wet environment. The operating temperature for the product is 0 to 45 (while charging is 40).
- Caution risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions.
- The SAR limit of Europe is 2.0 W/kg. This device was tested for typical body-worn operations with the back of the device kept 5mm from the body. To maintain compliance with RF exposure requirements, use accessories that maintain a 5mm separation distance between the user’s body and the back of the device. The use of belt clips, holsters and similar accessories should not contain metallic components in its assembly. The use of accessories that do not satisfy these requirements may not comply with RF exposure requirements, and should be avoided.
-
RF Frequency and power
WWANFrequency Band| Maximum output power(dBm)
WCDMA Band I| 24.00
LTE Band 1| 24.00
LTE Band 3| 23.50
LTE Band 7| 22.00
LTE Band 20| 24.00
WLAN
Standard| Frequency| EIRP Power(dBm)
WIFI 2.4G| 2.4-2.4835GHz| 20.
WIFI 5G| 5.15-5.25GHz| 18.
5.25-5.35GHz| 18.
5.47-5.725GHz| 18.
5.725-5.825GHz| 14.
BLUETOOTH
Bluetooth Version| EIRP Power(dBm)
EDR| 14.
LE| 9.
NFC
Frequency| 13.56MHz| -19.00 dBp.A/m at 10m - The Wi-Fi function is restricted to indoor use only when operating in the 5150 MHz to 5350 MHz frequency range.
| AT| BE| BG| HR| CY| CZ| DK
---|---|---|---|---|---|---|---
EE| Fl| FR| DE| EL| HU| IE
IT| LV| LT| LU| MT| NL| PL
PT| RO| SK| SI| ES| SE| UK - Prevention of Hearing Loss
Prevention of Hearing Lee
To prevent possible hearing demage, do not listen at high volume levels for
long periods.
Manufacturer Information
Rhino Mobility LLC 8 The Green, Suite A, Dover, Delaware,19901, USA
EU and UKCA Regulatory Conformance
Hereby, Rhino Mobility LLC declares that this device is in compliance with the
essential requirements and other relevant provisions of Directive 2014/53/EU
and Radio Equipment Regulations 2017.
For the declaration of conformity, visit the Web site
rhinomobility.com.
FCC Statement
FCC ID: 2AUOUC6D
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one of the
following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the
party responsible for compliance could void the user’s authority to operate
this equipment.
This transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter.
Radiation Exposure Statement
This device meets the government’s requirements for exposure to radio waves.
This device is designed and manufactured not to exceed the emission limits for
exposure to radio frequency (RF) energy set by the Federal Communications
Commission of the U.S. Government.
The exposure standard for wireless device employs a unit of measurement known
as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is
1.6W/kg. Tests for SAR are conducted using standard operating positions (10mm)
accepted by the FCC with the device transmitting at its highest certified
power level in all tested frequency bands.
FOR COUNTRY CODE SELECTION USAGE (WLAN DEVICES)
Note: The country code selection is for non-US model only and is not
available to all US model. Per FCC regulation, all WiFi product marketed in US
must fixed to US operation channels only.
Caution
a) Do not disassemble or open crush, bend or deform, puncture or shred
b) Do not modify or remanufacture, attempt to insert foreign objects into the
battery, immerse or expose to water or other liquids, expose to fire,
explosion or other hazard.
c) Only use the battery with a charging system that has been qualified with
the system per CTIA Certification Requirements for Battery System Compliance
to IEEE 1725. Use of an unqualified battery or charger may present a risk of
fire, explosion, leakage, or other hazard.
d) Replace the battery only with another battery that has been qualified with
the system per this standard, IEEE-Std-1725. Use of an unqualified battery may
present a risk of fire, explosion, leakage or other hazard. Only authorized
service providers shall replace battery. (If the battery is non-user
replaceable).
e) Promptly dispose of used batteries in accordance with local regulations
f) Improper battery use may result in a fire, explosion or other hazard.
g) Do not replace an embedded battery pack. Improper replacement may present a
risk of fire, explosion, leakage or other hazard. Contact the manufacturer for
replacement instructions.
h) The device recognizes the battery via battery ID resistance. For those host
devices that utilize a USB port as a charging source, the host device’s user
manual shall include a statement that the tablet shall only be connected to
CTIA Certification certified adapters, products that bear the USB-IF logo or
products that have completed the USB-IF compliance program.