RHINO Solar Pro Omni Adjustable Skid steer Mounted Pile Driver Owner’s Manual
- June 12, 2024
- RHINO
Table of Contents
Pneumatic • Hydraulic • Gasoline
Professional Grade Tools
Solar Pro
Omni Adjustable Skid steer
Mounted Pile Driver
Part Number 360001
Designed to expedite the installation of solar-panel supports (piles) utilized in ground-mounted solar projects. This professional-grade skid steer attachment is designed, built, and supported in the USA to provide shorter lead-times and unmatched product support. It’s omni adjustable, powerful 800 ft. lb. (1,085 joule) hydraulic hammer safely increases job site productivity and profits.
Features and Benefits
Pile Driver Attachment is Omni Adjustable to ensure precise, prompt, and plumb, pile installations regardless of the job site terrain.
- Mast tilts 2° right, 90° left, and 10° front and back.
- Attachment adjusts 10” front-to-back, and 24” left to right.
- Accommodates solar panel supports (piles) up to 15’ (457.2 cm) tall.
Utilize existing company owned (or rental) hydraulic operated skid steer.
- No need for an expensive self-propelled pile driver to complete projects on-time and on-budget.
- Universal Skid Steer mounting plate for quick attachment to most units. Rhino provided, custom mounting plate available on request.
State-of-the-art, Furukawa Fx 55 Hydraulic Hammer with 2-year warranty.
- Designed for efficient driving, dependability, and long life.
- Powerful 800 ft. lbs. (1,085 joules) of Impact energy per stroke (approx 1,000 blows/min.)
- New and improved piston (increased diameter and longer stroke) increases speed – Providing greater impact energy.
- Mono-block design – Reduced maintenance with only two moving parts.
Quality US materials and workmanship for dependability, low maintenance, and a long operating life.
- Parts and service available throughout the USA.
- Readily available SAE fittings and hardware – Overnight shipment available on most parts.
- Hydraulic components are inventoried, or repairable by most local
2 YEAR
WARRANTY Furukawa Hydraulic Hammer
1 YEAR
WARRANTY Materials and Workmanship
Optimal Positioning
The Solar Pro is off-set (right-side) so skid steer operator can easily
maintain straight lines.
Reliable Operation
Designed for dependability, low maintenance, and a long life:
- Minimal grease zerks
- Occasional adjustment
- Designed, built and supported in the USA
Improved Mobility
Pile Driver Attachment retracts, and folds, for ease of transportation to and
from the job site.
https://vimeo.com/showcase/8157873
Adjust mast front-to-
back: To
accommodate for uneven terrain, mast tilts (front-to-back) 10° in each
direction.
Adjust mast left or right:
To accommodate for uneven terrain, mast tilts 2°right. The mast tilts 90° left
for adjustment and transport.
Adjust attachment front-to-back:
Attachment provides precise positioning front to-back with 10” (25.4 cm) of
adjustment.
Adjust attachment side-to-side:
Attachment provides precise positioning side-to-side with 24” (61 cm) of
adjustment.
“We’ve been using the Rhino Solar Pro for about 18 months, and we’ve had great
luck with it. Rhino Tool has been very helpful in solving any issues. The
machine is high quality and has performed well in nearly every situation. I
like that we can use our skid loader to drive the piles as well as carry
materials around the job site.”
Jason Nisly, Installer at King Solar
Two quick-read, numbered, leveling indicators to
plumb pilings. Accommodates solar panel supports (piles) up to 15’ (457.2 cm)
tall Easily transport company owned, or rental, hydraulic operated equipment
(skid steer or loader) and Solar Pro Attachment.
Solar Pro Specifications
Unit Weight| 3,000 lbs. (1,361 kg)
Pile Driving Impact Energy| 800 ft. lbs. (1,085 joules) Per Stroke
Blows Per Minute| Approximately 500 to 1,000
Omni Directional Adjustment for positioning
the Pile and to Accommodate for Uneven
Terrain| Mast Tilt 2 Degrees Right & 90 Degrees Left
Mast Tilts 10 Degrees Forwards and Backwards
10″ (25.4cm) Front to Back Adjustment
24″ (61cm) Left to Right Adjustment
Unit Size Folded for Transportation| 6′ 2″ H x 3′ 10″ W x 11′ 8″ L (1.88 x
1.17 x 140m)
Maximum Pile Height| 15′ (4.6m) Tall
- Standard Anvil – Max Footprint| 8″ x 7.25″ (20.32 x 18.4cm)
- Optional Large Anvil – Max Footprint| 10″ x 7.25″ (25.4 x 18.4cm)
*Custom sizes and shapes available.
Skid Steer Requirements
Skid steer Minimum Operating Weight| > 10,000 lbs. (4,536 kg)
Skid steer Minimum Rated Operating Capacity| > 3,000 lbs. (1,360 kg)
Hydraulic Requirements| 3-Lines: Pressure – Return – Case Drain
Hydraulic Operating Pressure Range| 1740 – 2320 psi (120 – 160 bar)
Hydraulic Oil Flow Range| 10.5 – 22.5 gpm ( 40 – 85 lpm)
Omni Directional
Adjustment for precise positioning and leveling of the pile and to accommodate
for Uneven Terrain
Solar Pro Accessories
Lift Kit, Puller, and Adapters Removable adapter plate, shown above.
Custom sizes and shapes available. Bottom Guide secures Pile – Custom sizes
and shapes available.
Versatility from one unit – Multiple Adapters to provide efficient driving of
piles/post/beam up to a maximum footprint of 10” x 7.25” (25.4 x 18.4cm), and
maximum height of 15’ (457.2 cm) tall.
- C-Channel Solar Piles
- Highway Guardrail Posts
- I-Beam
Don’t see your post type? Contact us about custom adapter fabrication.
| Adapter / Guide | Part No. | Pile/Post/Beam Type |
|---|---|---|
| 360200 / 360154Standard | UNIRAC 6” x 4.5” | |
| 360294 / 360295 | S3 x 5.7 I-BEAM | |
| 360296 / 360154 | 7 x 4 SINCLAIR | |
| 360300 / 360295 | 8 x 3.15 m SOLAR MTS | |
| 360304 / 360154 | W6 x 15 I-BEAM |
W8 x 10 lbs/ft SOLAR
10” Anvil Kit
Anvil / Adapter / Guide| Part No.| Pile/Post Type
| 360277| SINCLAIR 9 x 4
Pile Lift Kit features a magnetic lift assist that attaches to the pile or
post. With a rated lift strength of 1378 lbs and a max pull-off strength of
550 lbs, this accessory aids the operator in manipulating the pile/ post from
the ground into a vertical position.
The single leg lift chain on the magnet has a working load limit of 2700 lbs,
when pulling at 90 Degrees.
This accessory can easily be removed when not in use or while transporting.
Part No.360270 Pile Puller Kit features a 1 ton vertical lift plate clamp and
safety shackle attached to the steel pull plate on the front of the mast and
hammer. The vibratory assist, and a vertical pull capacity of 2000 lbs (1 ton)
removes pile/post from the ground. This accessory can easily be removed when
not in use or while transporting.
Part No. 360267
A Tradition of Quality and Service Since 1975 © Copyright 2023 Rhino
Tool Company, Inc.
Form No. 000615 RHINO TOOL COMPANY
1134 WEST SOUTH STREET • KEWANEE, IL 61443
www.rhinotool.com
866-707-1808
Documents / Resources
|
RHINO Solar Pro Omni Adjustable Skid steer Mounted Pile
Driver
[pdf] Owner's Manual
Part Number 360001, Solar Pro Omni Adjustable Skid steer Mounted Pile Driver,
Solar Pro, Solar Pro Skid steer Mounted Pile Driver, Omni Adjustable Skid
steer Mounted Pile Driver, Pile Driver
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>