Kruger Matz KMPM4 Wireless Earphones Instruction Manual
- June 3, 2024
- Kruger Matz
Table of Contents
Kruger Matz KMPM4 Wireless Earphones
OVERVIEW
- Touchpanel
- Charging case
- Battery case indicator
- USB type C port
SAFETY INSTRUCTION
- Before connecting the earphones to the device, turn the volume down to avoid damaging ears. Keep the volume at a reasonable level throughout entire time of using the earphones.
- To prevent damage to your hearing, do not raise the volume too high.
- Do not use the earphones in places where the inability to hear ambient sound presents a serious risk (such as at railroad crossings, train stations, construction sites or on roads where vehicles and bicycles are traveling). Never use the earphones while driving a car, riding a motorcycle or bicycle or operating any other vehicle, as it may cause potential risk to your safety.
- Wireless devices can cause interference in aircraft. Please make sure that your earphones are powered off in flight.
- Use of this device near medical apparatuses may cause interference in their operation.
- Follow basic safety rules when operating the device.
- If you experience tinnitus, discomfort or other concerning behaviors, stop using the device immediately.
- Protect the earphones from shock and being dropped.
- Keep the device out of the reach of children.
- Protect this device from water, humidity and other liquids. Avoid using/storing it in extreme temperatures. Do not expose it to direct sunlight and other sources of heat.
- Do not use this device if it has been damaged.
- Use only authorized accessories.
- Do not use fast charger to charge the case.
- Do not attempt to repair this device yourself. In case of damage, contact authorized service point for check-up or repair.
- Before cleaning, turn off the device.
- Clean this device with soft, slightly damp cloth. Do not use any abrasives or chemical agents to clean this product.
OPERATION
- To turn on the earphones, take them out of the charging case, or tap and hold the touchpanel for 5 seconds.
- To turn off the earphones, put them into the charging case, or tap and hold the touchpanel for 5 seconds.
- If the earphones battery level is low, the warning sound will be played every 40 seconds.
- Battery level of the charging case is indicated by the charging indicator.
CHARGING
- Place both earphones into the charging case. Make sure, that the earphones are positioned correctly: “L” on the left, “R” on the right. Both earphones have a magnet that will align the earphones with the pins.
- During charging, the case charging indicator will glow orange. After finished charging, the case charging indicator will turn off.
CHARGING THE CASE
- Connect the USB type C cable to the charging port of the case. Connect the USB plug to the compatible USB port on a computer or a power adapter.
- During charging, the case charging indicator will change color:
- If the case battery level is below 5%, the indicator will flash orange.
- If the case battery is charging, the indicator will flash green.
- If the case battery is fully charged, the indicator will glow green.
- After finished charging, the indicator will turn off.
PAIRING
- Take out both earphones from the case. The earphones will connect with each other automatically.
- Turn on the Bluetooth function on the external device and search for new Bluetooth devices.
- Select KM M4 PRO and connect the external device with the earphones.
- After successful pairing the audio cue will be played.
Note
- The earphones will turn off after 3 minutes of idle.
- The distance between earphones can’t exceed 2 meters.
MONO MODE
- You can use just one of the earphones. After pairing the earphones with the external device, place one of the earphones in the case, or turn it off. The second earphone will stay connected to the external device.
- The earphones connect automatically after turning on. If not, place both earphones in the charging case and touch and hold the touchpanel on both earphones for about 10 seconds. After turning them on, they will connect with each other.
TOUCHPANEL FUNCTIONS
- Tap once to play or pause the music.
- While playing, touch and hold the touchpanel of the right earphone, to fast forward to the next track.
- While playing, touch and hold the touchpanel of the left earphone, to go back to the previous track.
- While playing, tap the touchpanel of the left earphone twice, to decrease volume.
- While playing, tap the touchpanel of the right earphone twice, to increase volume.
- Tap once to pick up an incoming call.
- Touch and hold the touchpanel to reject an incoming call.
- Tap the touchpanel of the right earphone three times to activate the voice assistant.
- Tap the touchpanel of the left earphone three times to activate/deactivate game mode. While the game mode is activated, the earphones will have lower latency.
Lechpol Electronics Sp. z o.o. Sp.k. hereby declares that Wireless Earphones KMPM4 are consistent with directive 2014/53/UE.
Correct Disposal of This Product
(Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract. This product should not be mixed with other commercial wastes for disposal.
Made in China for LECHPOL ELECTRONICS Sp. z o.o. Sp.k., ul. Garwolińska 1, 08-400 Miętne.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>