GERMAN POOL EFB-226-SC WiFi Smart DC Motor SlimTower Bladeless Fan User Manual

: June 12, 2024
: GERMAN POOL

Table of Contents

EFB-226-SC WiFi Smart DC Motor SlimTower Bladeless Fan
Product Information: WiFi Smart DC Motor SlimTower Bladeless
Table of Contents
Product Usage Instructions

EFB-226-SC WiFi Smart DC Motor SlimTower Bladeless Fan

Product Information: WiFi Smart DC Motor SlimTower Bladeless

Fan

Model: EFB-226-SC

This user manual provides instructions and warranty information
for the WiFi Smart DC Motor SlimTower Bladeless Fan. Please read
these instructions carefully before use and keep them handy for
future reference.

Product Usage Instructions

Notice Before Use

The appliance is not intended for use by children, elderly or
disabled people, or any individual lacking experience and knowledge
concerning the use of the fan, unless they have been given
supervision or instruction by a person responsible for their
safety. Children should be supervised to ensure that they do not
play with the appliance.
Please use a separate outlet in accordance with the appliance
current. Do not use the socket with other appliances at the same
time.
If the fan does not work, the power must be turned off and
repaired by qualified personnel.
Do not move the fan when it is plugged in.
When plugging or unplugging the power plug, hold the plug with
hand and do not pull the power cord.
If the power cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified persons in
order to avoid a hazard.
Do not stretch or strain the power cord and keep it away from
overheated surfaces.
Do not run the fan on the carpet, and do not cover carpets,
other devices or similar materials. This could restrict the
airflow.

General Safety Information

Examine the device for any visible external damages prior to
using it. Never put a damaged device into operation. Contact the
dealer if needed.
Persons who are not able to operate the device due to decreased
physical or mental abilities may only use the device under the
supervision or instructions of a responsible person.
Do not permit children to use the device, unless they are
supervised.
Only qualified electricians, who have been trained by the
manufacturer, may carry out any repairs that may be needed.
Improperly performed repairs can cause considerable dangers for the
user.

Fire Risk

Avoid placing the fan near sensitive materials such as
furniture, curtains, paper, clothes, etc.

Caution for Parents

Ensure that children and infants do not play with the appliance.
Keep them away from the air outlet.

WiFi Smart DC Motor SlimTower Bladeless Fan

EFB-226-SC

Online Warranty Registration
Please read these instructions and warranty information carefully before use and keep them handy for future reference.
USER MANUAL
P.1

Please register your warranty information now! For Warranty Terms & Conditions,
please refer to the last page of this user manual.

P.2

Tables of Contents

Notice Before Use

4

Product Structure

9

Prior to First Use

10

Operating Instructions

11

Care & Maintenance

22

Troubleshooting

23

Technical Specifications

24

Warranty Terms & Conditions

47

P.3

Notice Before Use
1. The appliance is not intended for use by children, elderly or disabled people, or any individual lacking experience and knowledge concerning the use of the fan, unless they have been given supervision or instruction by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.
2. Please use a separate outlet in accordance with the appliance current. Do not use the socket with other appliances at the same time.
3. If the fan does not work, the power must be turned off and repaired by qualified personnel. 4. Do not move the fan when it is plugged in. 5. When plugging or unplugging the power plug, hold the plug with hand and do not pull the power
cord. 6. If the power cord is damaged, it must be replaced by the manufacturer, its service agent or simi-
larly qualified persons in order to avoid a hazard. 7. Do not stretch or strain the power cord and keep it away from overheated surfaces. 8. Do not run the fan on the carpet, and do not cover carpets, other devices or similar materials. The
power cord should be kept away from passing areas and placed in areas that it will not be tripped over. 9. Turn off all functions before unplugging the fan. 10. When it is not in use for a long time, unplug it from the socket. To avoid the risk of tripping, securely store the wires. 11. Do not put any object on the air inlet or outlet to make sure the air inlet and outlet are free from dust, lint, hair, and any obstacle that may reduce airflow. 12. The fan should be placed on a non-inclined dry surface with good ventilation, where is away from heat sources and has no surrounding corrosive gas. There should be 30cm space around the fan to ensure air flow. 13. It is only intended to be used in a dry place only. It cannot be used outdoors or on a wet surface. 14. Do not immerse the fan, power cord, or power plug in water or other liquids to avoid danger. For non-professionals, do not use other extension power cords. 15. Do not use air purifier or similar products directly next to the fan. Do not use any detergent or lubricant on the fan. The plug must be unplugged before cleaning and maintenance.
P.4

Notice Before Use

ATTENTION

To ensure proper usage and maintenance of the fan, please read the instruction manual carefully before use and take good care of this manual for future reference.

If the dangerous situation is not avoided,
DANGER this can lead to death or serious injuries.

ATTENTION

If the dangerous situation is not this can lead to serious injuries.

avoided,

Symbol indicates “prohibited”
Symbol indicates “force” (please be sure)

General Safety Information
1. Examine the device for any visible external damages prior to using it. Never put a damaged device into operation. Contact the dealer if needed.
2. Persons, who are not able to operate the device because of any decreased physical, mental abilities may only use the device under the supervision or under the instructions of a responsible person.
3. Do not permit children to use the device, unless they are supervised. 4. Only qualified electricians, who have been trained by the manufacturer, may carry out any repairs
that may be needed. Improperly performed repairs can cause considerable dangers for the user.

Prohibit

DANGER
· Only qualified electricians, who have been trained by the manufacturer, may carry out any repairs that may be needed.

Prohibit

· This appliance is used in the household only. · Please use a separate outlet in accordance with the appliance current/voltage.
Don’t use more than one electrical appliance at the same time on the same outlet. · Do not pull the power cord to remove the plug from the mains socket. · Do not use the appliance if the power cord or mains plug is damaged. · Do not open the housing of the appliance. · Danger from electric current if live connections are touched and/or the electrical
and mechanical configuration is changed. · Never immerse the appliance or the power cord into water or other liquids. · Do not touch the power cord with wet hands when disconnecting the appliance
from the mains supply.

P.5

Notice Before Use

DANGER

· This appliance may be used by children under the age 8 years and by persons with decreased physical, sensory or mental abilities or lack of experience and/or knowledge only if they are supervised or were instructed on using the appliance and have understood the resulting dangers.
· Cleaning or maintenance may not be performed by children who are not under supervision.
· Children must be supervised to ensure that they do not play with the appliance.
· Store the appliance and accessory parts out of the reach of children.

Prohibit

Fire Risk
· Never cover the appliance when it is in operation. · Do not put the appliance in the vicinity of easily inflammable materials
such as paint, varnish or gas. · Allow a gap of at least 1m between the fan and all flammable and heat-
sensitive materials (furniture, curtains, paper, clothes etc.).

W AR N I N G

Force

· Immediately disconnect the power plug from the electrical outlet and stop using it when find (abnormal noise, burnt odor etc.).
· If you continue to use it while it remains abnormal, there is a risk that leads to smoke or fire, electric shock or injury.
· Please consult your dealer.
· During use, when the power plug or power cord becomes abnormally hot, it is at the risk of fire. Please stop using.
· Please clean the plug regularly with a dry cloth, otherwise dirty or dusty plug may cause defective insulation and cause fire.

P.6

Notice Before Use

CAUTION

Prohibit

· Place the appliance on a firm, dry, flat and waterproof surface. · Do not install the appliance in a hot, wet or very humid environment. · Never place the appliance or parts of the appliance in the vicinity of strong
heat sources and hot surfaces (e.g., heating, oven, and grill). · Do not place the fan in a narrow place, a corner or in narrow areas
between furnitures. Allow sufficient space around it so that the air can circulate fully. · The appliance becomes very hot during operation. Therefore, do not touch the hot surfaces of the appliance during operation and for a short time afterwards. · Wait until the appliance has cooled down before transporting it. · Do not spray air freshener into the airflow. · Do not place the appliance in front of an automatic air freshener atomizer
system.

CAUTION

Force

· Always turn off the on/off button at the control panel and wait for it to stop
running before unplugging it from the power socket.
· Do not put objects into the openings or ventilation grilles. · Keep the appliance free from dust, fluff, hair and above all, anything that
could restrict the airflow.

P.7

Notice Before Use
ATTENTION Caution for Parents
Children and infant must be ensured that they do not play with the appliance. air outlet
Cleaning of Air Inlet
Check the air inlet and the air outlet for free flow. Eliminate contamination such as dirt or dust particles with a soft brush.
air inlet
P.8

Product Structure

Front Side Remote Control Shelf

Back Side Remote Control Shelf

Remote Control
Please refer page 12 for remote control operation

Air Outlet

LED Display

CR2025
CR2025 button cell Please refer page 10 for button
assemble
Air Inlet
Power Plug Power Cord

P.9

Prior to First Use
Product Placement
· The fan shall be put in a leveled place. Please don’t, place the fan in unstable places, such as slope, soft surface to prevent the fan from tipping over and causing damage or malfunction.
· Avoid blocking the air inlet in use. Keep the fan away from curtains when it is plugged in to prevent the object from blocking the air inlet and the fan will not work.
· Don’t place objects within 30 cm in front of the outlet. away from curtains
Don’t place objects within 30 cm
Battery Replacement
Please prepare button cell [CR2025] 1. Hold battery cover down and turn counter-clockwise to open
position. 2. Insert a new battery with + mark upwards 3. Place battery cover back onto remote then rotate clockwise to
close position.
Caution: Do not recharge battery after use and keep out of reach from children. Remove the battery if the remote is not being used for an extended period of time. Consult a doctor if any component is swallowed. Please take out battery if it is not to be used for a long time.
P.10

Operating Instructions

When operating the fan with a remote control, we suggest that the remote control be aimed at the receiver at the front of fan to achieve the best control signal.

Watch the video clip

The following cases may occur when operating the fan: 1. This fan may work when using remote control of other electrical appliances. 2. Other appliances may work when using remote control of this fan.
This is due to the overlap of the frequency of the remote control. It is not the quality problem. Please keep this remote control away from other appliances while using it to avoid misuse.

Insert the power plug into the socket and LED display will be on.

LED Display

P.11

Operating Instructions

Remote Control
All functions can be operated by remote control Swing To start/stop swing
Sleep Mode Change to softy wind

Speed Increase / Decrease Total 9 speed Levels
Timer Total 1-8h timer off

On/Off To switch On/Off the fan

Strong Wind Max. airflow speed only can set by remote
control

Operation
You can hear beep sound when you press the button on fan or remote control every time.

On/Off

Fan

To start fan operation press the display panel. Tap the panel to cycle from

fan speed 1 9. Hold down the display panel for 2 seconds and a buzz will

sound, release the panel and the fan will stop operation.

Remote Control

The fan also can be turned on/off by using the remote control.

On / Off

Timer

Remote Control

Press this button to set timer off from 1 to 8 hours. Timer funtion operates

in 1-8-0 circulation. 0 refes to timer off (with 2 beep souds). Timer

· The other functions of the fan still can be used after the timer function is set. · The machine will stop running when the set time is up. Please press the power button again if you
need to restart it. · After the fan power is turned off, the timer setting will also be cancelled.

Sleep model

Remote Control

Please press this button on the remote control, LED display shows L, and

Sleep Mode the wind turns to be soft. Press wind speed button + – to exit this mode.

P.12

Operating Instructions

Strong wind

Remote Control

Please press this button on the remote control, LED display shows H, and

Strong Wind the wind turns to be strong. Press wind speed button + – to exit this mode.

Swing
Fan

Press the display for 1 second to start swing. Press it again for 1 seconds and remove the hand after hearing one beep sound, the swing stops.

Remote Control

Swing function also can be operated by the remote control.

Swing

When the remote control is not in use, put it on the remote control shelf at the top. There is a magnet inside to hold the remote control.

Remote Control Shelf

Caution: It does not completely turn off the fan power if you just turn off the power button on either the fan or the remote control. If you do not use the fan for a long time, unplug the plug.

P.13

Operation Instructions
Connecting The Product To WiFi This product can be controlled via smartphone with German Pool Smart Control APP.
Note: To connect the product to WiFi, please use WiFi with a frequency of 2.4 GHz, does not work with WiFi with a frequency of 5.0 GHz.
A. How To Set Up The APP 1. Connect your phone to 2.4 GHz WiFi then scan the QR Code below, or search “German Pool Smart Control”in App Store or Google Play to download and install the APP.

Apple IOS System App Store
B. Change The Language Apple IOS System

Android System Google Play

1. Search “Smart Control” in Settings.

2. Click “Preferred Language”.

3. Select Traditional Chinese or English in the “Suggested Languages” column (Note: if user select “Traditional Chinese (Hong Kong)”, app will display in English).

Android System App will appear in your preset phone language. If you need to change APP language, you need to change the system language in your phone settings.

P.14

Operation Instructions
C. Register Your Account

1. Open the APPclick “Agree” on “User Agreement and Privacy Policy”.

2. Click “Sign Up” to register your account.

3. Enter your email address, tick “I agree Privacy Policy and User Agreement”, then click “Get Verification Code”.

4. Enter one-time verification code from your email.

5. Set up your password then click “Done”.

P.15

Operation Instructions
D. Pairing Sequence Method 1: Auto Pairing

ON/OFF
1. Long-press the product’s LED Display for 5 seconds until “F” blinks.

2. Click “+” on the upper right corner of the APP homepage, then click “Add Device”.

3. Before pairing, user must allow the App to access your Bluetooth. Tap on “Turn on Bluetooth” (if Bluetooth is already on, ignore this step).

4. Tap “Go To Set” (if Bluetooth is already on, ignore this step).

5. Turn on Bluetooth (if Bluetooth is already on, ignore this step).

6. APP will show “Searching for nearby devices…”.

DC Motor SlimTower Bladeless …

7. APP will show “Discovering devices…”, click “Add”.

8. Click “+” on the right of product name.

P.16

9. it is recommended to allow the APP to access your location. Tap “Set Now” (if Location is already on, ignore this step).

Operation Instructions

DC Motor SlimTower Bladeless …

10. Tap “Allow While Using App” (if Location is already on, ignore this step).

11. Select WiFi name and enter your WiFi password, then click “Next”.

12. APP will show “Being Added”, the product and APP will automatically pair up.

DC Motor SlimTower Bladeless …
13. When pairing is completed, APP will show “Added successfully”. Click “Done” to return to homepage.
WARNING! If Bluetooth is turned off or App is not permitted to access Bluetooth, the product cannot be paired. (Note: Even if Bluetooth is turned on, it does not mean the APP is allowed to access your Bluetooth.)
Note: · The product can only be paired to one account at a time. If another user pairs their smartphone to
the product, the previous account will lose their control of the product. · User who has already been paired can share their control rights with other users. For details, see
“E. Sharing Control”.
Note: If APP cannot find the product, or during Pairing Sequence, if APP shows an exclamation mark icon, it means pairing is unsuccessful. Please use method 2 below for pairing.
P.17

Operation Instructions
Method 2: Bluetooth Pairing

1. Click “+” on the upper right corner of the APP homepage, then click “Add Device”.

2. In the “Add Manually ” column, find the product model that needs to be paired, and click the product to pair.

3. Follow the instructions on the APP to pair.

DC Motor SlimTower Bladeless …

4. Click “+” on the right of product name.

5. Select WiFi name and enter your WiFi password, then click “Next”.

6. When pairing is completed, APP will show “Added successfully”. Click “Done” to return to homepage.

WARNING! If Bluetooth is turned off or App is not permitted to access Bluetooth, the product cannot be paired. (Note: Even if Bluetooth is turned on, it does not mean the APP is allowed to access your Bluetooth.)

P.18

Operation Instructions
E. Sharing Control
WiFi Smart UVC Plasma Air …

1. On the product’s homepage, click ” ” on the upper right corner.

2. Click “Share Device” under “Others”.

3. Click “Add Sharing”.

DC Motor SlimTower Bladeless Fan

WiFi Smart UVC Plasma Air Purifier Fan has been shared with

4. Set the number of users with whom you wish to share control, then click “Share with the Account Smart Control”.

5. Enter that account’s registered email address, then click “Done” on the upper right corner.

6. Repeat step 3-5 to share with more accounts.

Note: On the “Share Device” page, you can add or delete other accounts’ control rights.

P.19

Operation Instructions
Controlling The Product With The APP
Sleep Mode Key Rhythm Mode Key

Settings Key
Max Mode Key
Sound Key Fan Speed Level Radial Slider Fan Speed Level

On/Off Oscillation Timer

Key

P.20

Operation Instructions

Key Sleep Mode Key Rhythm Mode Key Max Mode Key Fan Speed Level Radial Slider On/Off Key Timer Key Oscillation Key Sound Key

Description Tap this key to select Sleep Mode
Tap this key to select Rhythm Mode
Tap this key to select Max Mode
Tap and slide to adjust fan speed level (1-9)
Tap this key to turn product on or off (return to standby state)
Tap this key to set the product to turn off in 1-8 hours, or cancel the timer Tap this key to start or stop oscillation
Tap this key to tuen sound on or off

P.21

Care & Maintenance
Switch off the fan and unplug it from the power socket before cleaning and maintenance.

Watch the video clip

Caution: Don’t splash water on the fan. It may damage the fan. Please don’t use paint thinner, gasoline, alcohol, bleach or metal object to clean the surface of the fan. Otherwise it may discolor or deteriorate the surface of the fan.or the remote control.
Fan Surface
Please gently wipe the surface with a clean soft cloth. If the fan surface is dirty, you can use a mild detergent after diluted with a wet cloth to wipe the fan surface, then wipe it with a soft dry cloth.
Air Inlet & Air Outlet
Use a soft brush or a vacuum cleaner to clean the dust around the air inlet and the air outlet. Dust accumulation would affect the use of the fan. Please clean the fan timely.
Remote Control
Wipe the remote control surface gently with a dry, soft cloth. Remove the battery of the remote control if it is not to be used for a long time.
Power Plug
Please clean the power plug with a dry soft cloth.
Storage
· Place the fan in a large plastic bag for dust protection after care and maintenance. · Please avoid shaking places and electrical appliances with refrigeration/heating function. · Avoid placing it in direct sunlight, hot and wet places. · Please store the fan in the clean and dry place. · Please place it where children can’t touch it.
P.22

Troubleshooting
When abnormal situation occurs, please check the following instructions first. Please contact customer service and repair centre if it still has problems.
Danger: Please don’t disassemble and repair the fan without authorization.

Problem Plug it in but don’t work Remote control doesn’t work

Possible Cause and Solution
The plug is inserted correctly? Is the power indicator on? Check if there’s power failure.
Is the battery no power? Please replace new battery ( refer to page 10)
Is the battery installed in the right direction? Please change the battery direction (refer to page 10)
Is the remote control aiming at the signal receiver of fan? Please refer to page 12

P.23

Technical Specifications

Model Voltage Frequency Power Swing Range Timer Range Motor Product Dimensions Net Weight

EFB-226-SC 220-240V 50 Hz 26 W 90° 1-8 hour BLDC Brushless Direct Current Motor (H)1020mm (W)230mm (D)230mm 2.6kg

Specifications are subject to change without prior notice. If there is any inconsistency or ambiguity between the English version and the Chinese version, the Chinese version shall prevail. Refer to
www.germanpool.com for the most up-to-date version of the Operating Instructions.

P.24

26

31

32

33

44

45

46

47

P.25

2. 3. 4. 5. 6. 7. 8.
9. 10. 11.
30CM 13. 14.

P.26

“” “”

2. 3. 4.

·

· · /
· · · ·
· ·

P.27

· 8
· · ·
· · · 1

·
· · ·
·

P.28

· · ·
·
·
· · ·

· · ·

P.29

P.30

26

LED

CR2025
CR2025 24

P.31

·
·
· 30
30CM

[CR2025] 1. Openn
2. + 3. Close

P.32

1. 2.

P.33

/ 9
1 8

“”

1-92

181-8-0 02

· · ·

L + –

P.34

H + –

11

P.35

WiFi German Pool Smart ControlAPP 2.4 GHzWiFi5.0 GHzWiFi
A. 2.4 GHzWiFiIOSApp StoreAndroid Google PlayGerman Pool Smart ControlAPP

IOS App Store
B.APP IOS

Android Google Play

1. Smart Control

3. () APP

Android APP

P.36

C.

1. APP 2.

P.37

D. 1

ON/OFF
1. LED 5F

2. APP+

6. APP …

DC Motor SlimTower Bladeless …

7. APP …

8. +

P.38

DC Motor SlimTower Bladeless ..

10. App

11. iFi

12. APP APP

DC Motor SlimTower Bladeless …
13. APP

·
· E.
APP2
P.39

2

1. APP+

3. APP

DC Motor SlimTower Bladeless …

4. +

5. WiFi

6. APP …

P.40

E.

1. 2. 3.

DC Motor SlimTower Bladeless Fan

WiFi Smart UVC Plasma Air Purifier Fan

4. SmartControl

6. 3-5

P.41

APP

P.42

1-9

1-8

P.43

· · / · · ·
P.44

( 24)
( 24)
? 25

P.45

EFB-226-SC 220V-240V 50Hz 26W 90° 1-8 BLDC (H)1020mm (W)230mm (D)230mm 2.6kg

www.germanpool.com

P.46

()

Warranty Terms & Conditions
Under normal operations, the product will gurantee a 1-year full warranty provided by German Pool (effective from the date of purchase).

VIP

This warranty is not valid until customer registration information is received by our Service Centre within 10 days of purchase via one of the following means:

Visit our VIP App and register online: (Scan the QR Code on the right)
www.germanpool.com/warranty
Visit our website and register online: www.germanpool.com/warranty
Complete the attached Warranty Card and mail it back to our Customer Service Centre.

Please fill out the form below. This information and the original purchase invoice will be required for any repairs. Warranty will be invalidated if information provided is found to be inaccurate.
Model No. : EFB-226-SC

Serial No. : Purchased From :

Invoice No. : Purchase Date :

2. – – () –
3. – – – –

1. Customer who fails to present original purchase invoice will not be eligible for free warranty service.
2. Customer should always follow the operating instructions. This warranty does not apply to: – labour costs for on-site installation, check-up, repair, replacement of parts and other transportation costs; – damages caused by accidents of any kind (including material transfer and others); – operating failures resulting from applying incorrect voltage, improper usage, and unauthorized installations or repairs.
3. This warranty is invalid if: – the purchase invoice is modified by an unauthorized party; – the product is used for any commercial or industrial purposes; – the product is repaired or modified by unauthorized personnel, or unauthorized parts are installed; – the serial number is modified, damaged or removed from the product.
4. German Pool will, at its discretion, repair or replace any defective part.
5. This warranty will be void if there is any transfer of ownership from the original purchaser.

Customer Service & Repair Centre

China Hong Kong

China Macau

59 B +852 2773 2888 +852 2356 9798 repairs@germanpool.com

() UnitB,G/F,SunshineKowloonBay

5151A Cargo Centre, 59 Tai Yip Street,

+853 2875 2699 +853 2875 2661

Kowloon, Hong Kong Tel : +852 2773 2888 Fax : +852 2356 9798

Email : repairs@germanpool.com

A, 1 Andar, Mei Kui Kuong Cheong Fase 2, No.515 Avenida Do Conselheiro Borja Macau Tel : +853 2875 2699 Fax : +853 2875 2661

This warranty is valid only in Hong Kong and Macau P.47

German Pool (Hong Kong) Limited

Hong Kong Room 113. Newport Centre Phase II. 116 Ma Tau Kok Road. Tokwawan. Kowloon. Hong Kong. Tel: +852 2773 2888 Fax:+852 2765 8215

China 8th, Xinxiang Road, Wusha Industrial Park, Daliang, Shunde, Foshan, Guangdong Tel:+86 757 2219 6888 Fax:+86 757 2219 6809

Macau A, 1 Andar, Mei Kui Kuong Cheong Fase 2, No.515 Avenida Do Conselheiro Borja, Macau Tel:+853 2875 2699 Fax:+853 2875 2661

HONG KONG TOP BRAND TEN YEAR ACHIEVEMENT AWARD
© All rights reserved. Copying, reproducing or using the contents of this manual is not allowed without prior authorization from German Pool, violators will be prosecuted.

www.germanpool.com P.48

EFB-226-SC-M-23(1)