JOY Factory aXtion Slim MH IP68 Case for iPad Installation Guide

Installation Guide

aXtion Slim MH IP68 Case for iPad

Cleaning Instruction for aXtion Slim

We recommend cleaning the case after every use cycle. Most hospital-grade disinfectant wipes with high alcohol concentrate are safe to use on the aXtion Slim case. A few that we recommend are:

• Sani-Cloth AF3
• Super Sani-Cloth
• Cavi-Wipes
• Clorox Healthcare Bleach Germicidal Wipes
• Oxivir TB

Follow these steps:

1. Clean the back cover with a hospital-grade wipe, using a small stroking motion. Pay special attention to the crevices.
2. Use a new hospital-grade wipe to clean the front cover and screen protector.
3. Let the case air dry before using.

Internal cleaning may be done as needed following these steps

1. Remove the tablet from the case and set aside.
2. Clean the inside back cover with a hospital-grade wipe, using a small stroking motion. Pay special attention to the crevices.
3. Use a new hospital-grade wipe to clean the inside front cover and screen protector.
4. Let the case air dry before putting the tablet into the case.

• Hospital-grade disinfectant wipes may have more detailed instructions for use. Please refer to the manufacturer’s instructions.
• These instructions are only for cleaning cases by The Joy Factory. To clean the tablet, please refer to the manufacturer’s instructions.

DISCLAIMER FOR aXtion® Slim Military Grade and Waterproof Certified Cases
Congratulations on the purchase of your new aXtion Slim case from The Joy Factory Inc!
BEFORE USE READ ALL INSTRUCTIONS CAREFULLY. IMPROPER USE OF THE CASE COULD RESULT IN DAMAGE TO YOUR DEVICE.
This aXtion Slim case is designed only for the device type listed on the box. Thus it is only intended for and only warrantied for proper use with  that specific tablet and not for use with another device type. Because different generations of tablets have different specifications, please refer to the packaging for your aXtion Slim case to determine whether your tablet will be compatible with the aXtion Slim case you have purchased.

If you are not certain whether the device you intend to use with the aXtion Slim case is compatible with the tablet model you have, please contact  the company from which you purchased the device or the manufacturer of the device to determine whether it is a model supported by this aXtion Slim case.

All aXtion Slim cases are certified IP68 waterproof. If you have any questions about whether your case will protect against water in certain  situations, contact The Joy Factory prior to using the case in those situations. The IP68 rating means that the aXtion Slim case is certified as “dust  tight” (that is, no dust will enter the case when it is properly installed and used). All aXtion Slim cases are also designed to be shock resistant. That  is, these cases are designed to provide a degree of confidence that your aXtion Slim case can physically and functionally withstand the relatively  infrequent, non- repetitive shocks encountered in various environments.

It is critical that before using your aXtion Slim case with your device, you first perform a waterproof test without your device in the case. It is especially important to ensure the case is properly closed when exposing it to water. An improperly closed case will render it non-waterproof and  will damage the device. Do not use your aXtion Slim case with your device without first ensuring you are readily familiar with your aXtion Slim case and how it functions.

If the aXtion Slim case is damaged or not functioning properly for any reason; immediately stop use. The Joy Factory expressly disclaims all liability  and all warranties, whether expressed or implied, for use of an aXtion Slim case that has been damaged for any reason. The case is covered under  our one year manufacturing warranty and can be replaced free of charge for any manufacturing defects. If you believe the case has a manufacturing  defect, cease use immediately and contact The Joy Factory by email at support@thejoyfactory.com or by telephone at 949-216-8888, Monday  through Friday, 9:00 a.m. to 5:00 p.m., Pacific Standard Time. The Joy Factory will not replace an aXtion Slim case that is damaged, other than one  with a manufacturing defect, The Joy Factory is not liable to replace or pay for replacement of your device or any additional items which may be damaged from use of a case with manufacturing defects.

The Joy Factory disclaims all liability for lost aXtion Slim cases and any device stored in a lost case.

Do not use your aXtion Slim case with any other case or bumper. Use of an additional case or bumper will render the aXtion Slim Case non- waterproof, and The Joy Factory disclaims all liability from such use and will void any and all warranties, expressed or implied.

Any alteration to your aXtion Slim case will void any and all warranties and guarantees, whether expressed or implied, and The Joy Factory disclaims any and all liability for damages arising from use of an altered aXtion Slim case.

Using the aXtion Slim case with any other device could lead to an improper seal of the case and will render the case non-waterproof. The Joy  Factory disclaims all liability and all warranties, whether expressed or implied, for use of the aXtion Slim case with any other device.

Contact us support@thejoyfactory.com
3-P215-010

Documents / Resources

| JOY Factory aXtion Slim MH IP68 Case for iPad [pdf] Installation Guide
aXtion Slim MH IP68 Case for iPad, aXtion Slim MH IP68 Case, IP68 Case for iPad, MH IP68 Case, Case, aXtion Slim
---|---

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>