KAHLES Helia TI Thermal Imaging Devices User Guide
- June 9, 2024
- KAHLES
Table of Contents
- KAHLES Helia TI Thermal Imaging Devices
- Product Information
- Product Usage Instructions
- 20026 HELIA TI 25 & 20027 HELIA TI 35
- ON
- OFF
- DIOPTER
- FOCUS
- COLOUR MODES
- DIGITAL ZOOM
- MENU
- MENU OFF
- FLAT FIELD CORRECTION
- AUTO OFF / ON DISPLAY
- CHARGING
- LOW BATTERY
- QUICK RELEASE FASTENER
- LENS COVER
- TEMPERATURE SHUTDOWN
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
KAHLES Helia TI Thermal Imaging Devices
Product Information
The HELIA TI is a thermal imaging device available in two models: HELIA TI 25 (product code: 20026) and HELIA TI 35 (product code: 20027). The device has a USB Type-C port for charging and comes with a warranty and safety instructions. It has several features including diopter adjustment, focus adjustment, color modes (white hot, black hot, red only), and digital zoom (up to 4x). The device also has a menu for various settings including flat field correction and auto off/on display.
Product Usage Instructions
To use the HELIA TI device, follow these instructions:
- Charge the device using a USB Type-C cable with a maximum of 2A, 5V DC according tothe IEC61010-1 standard.
- Turn on the device using the power button located on the top of the device. The device will turn on in the last used mode.
- Adjust the diopter by rotating the diopter adjustment ring until the image is clear.
- Adjust the focus by rotating the focus adjustment ring until the image is clear.
- Select the desired color mode (white hot, black hot, or red only) using the color mode button located on the top of the device.
- Use the digital zoom button located on the top of the device to zoom in up to 4x.
- Access the menu by pressing and holding the menu button located on the top of the device for 2 seconds. Use the menu to adjust various settings including flat field correction and auto off/on display.
- Turn off the device by pressing and holding the power button for 2 seconds. The device will also turn off automatically after 15 seconds or 4 hours of inactivity depending on the auto off/on display setting.
20026 HELIA TI 25 & 20027 HELIA TI 35
ON
OFF
DIOPTER
FOCUS
COLOUR MODES
DIGITAL ZOOM
MENU
MENU OFF
FLAT FIELD CORRECTION
AUTO OFF / ON DISPLAY
CHARGING
LOW BATTERY
QUICK RELEASE FASTENER
LENS COVER
TEMPERATURE SHUTDOWN
NOTES
- kahles.at/en/service
- KAHLES Gesellschaft m.b.H. | Danfoss-Straße 5 | 2353 Guntramsdorf | Austria T: +43 / 2236 / 520 20 / 0 | info@kahles.at
- BA-30205 2021/10
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>