RHINO 301250 Pro Series Extended Handles Owner’s Manual

June 12, 2024
RHINO

RHINO 301250 Pro Series Extended Handles

Pro SeriesTM Extended Handles – Product Information
Pro SeriesTM Extended Handles are designed for use with the Pro-Series Model Post Driver. These extended handles provide additional reach and leverage when operating the post driver.

Included Components

  • 301259 GPD Extended Handle – 24
  • 301267 GPD Extended Handle – Slotted 24
  • 301260 GPD Extended Handle – 54
  • 301261 GPD Extended Handle – Slotted 54
  • 300221 8 (203 mm) EPDM Foam Grip (1 per kit)
  • 301268 Extended Handle Cable Thimble
  • 301262 Throttle Control Assembly for 2′ Extended Handle
  • 301264 Throttle Control Assembly for 4 1/2′ Extended Handle
  • 301275 Extended Handle Warning Label – Protection
  • 301276 Extended Handle Warning Label – Balance
  • 301277 Extended Handle Installation Instructions
  • 995032-3 Cable Tie (3 per kit)
  • 301270 Extended Handle Hardware Kit

Bolt Torque Specifications
The torque specification for the 300715-4 Bolt is 132.0 in/lbs (14.91 Nm).

Optional Parts
If your Pro-Series Model does not have a lower handle, you may need to purchase the 301233 Lower Handle Assembly separately.

Warranty
Rhino Tool Company, Inc. provides a lifetime warranty for the Hammer and Anvil components of the Gasoline Powered Post Driver.
All other components are covered for twelve (12) months, except for the Honda GX35 engine which is not covered under Rhino’s warranty.
The warranty provided by American Honda Motor Co., Inc. applies to the Honda GX35 engine. This warranty is non-transferable.

The warranty does not cover damages caused by misuse, neglect, accidents, or unauthorized repairs, alterations, or servicing. It also does not cover damages or adjustments resulting from the use of supplies, parts, or attachments not sold or approved by Rhino Tool Company, Inc.

Rhino Tool Company, Inc. disclaims all other warranties, express or implied, including but not limited to the implied warranties of merchantability and fitness for a particular purpose. Rhino shall not be liable for any indirect, incidental, special, or consequential damages or losses arising from any defects in or performance issues with the Gasoline Powered Post Driver.

Product Registration
To register your Pro-Series Model Post Driver, fill out and mail the registration card provided with the post driver or visit the following website: http://rhinotool.com/contact-support/warranty-information/

Contact Information
Rhino Tool Company, Inc.
P.O. Box 111
Kewanee, IL 61443
Phone: 309.853.5555 | 866-707-1808
Website: http://www.rhinotool.com

Form 301277.103117

Pro Series
Extended Handles
OWNERS MANUAL

MODELS: 301250 / 301252

EXTENDED HANDLE PARTS LIST

RHINO-301250-Pro-Series-Extended-Handles-1

Limited Lifetime Impact Warranty

Gasoline Powered Post Drivers

Warranty: Rhino Tool Company,
Inc. (“Rhino”) warrants to the original purchaser, purchasing the Equipment in new condition, in original packaging from an authorized dealer that its Gasoline Powered Post Driver will be free from defects in workmanship and materials (the “Limited Warranty”).

The Limited Warranty shall survive for the lifetime of the product with respect to the Hammer and Anvil components and for twelve (12) months with regard to all other components, excluding the Honda GX35 engine for which Rhino provides no warranty and for which the warranty provided by American Honda Motor Co., Inc. shall be the sole warranty applicable thereto. This Limited Warranty is non-transferable.
For Warranty Claims contact your dealer or distributor. Proof of purchase date and serial number is required. In the event of a warranty repair, the post driver should be returned to a Registered and Warranty Authorized Rhino Servicing Dealer. Rhino’s obligation under this Limited Warranty is expressly limited to the repair or replacement, at Rhino’s election, of such defective Gasoline Powered Post Driver, which is proved to be defective upon inspection by a Rhino-certified/authorized technician.

This Limited Warranty does not extend to a Gasoline Powered Post Driver which has been subject to misuse, neglect, or accident, nor does it extend to any Gasoline Powered Post Driver which has been repaired, altered, or serviced by unauthorized persons. This Limited Warranty does not cover any damage or adjustments required to any Gasoline Powered Post Driver if such damage or adjustment is caused by the use of supplies, parts, or attachments not sold or approved by Rhino
EXCEPT AS OTHERWISE PROVIDED HEREIN, RHINO DISCLAIMS ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. UNDER NO CIRCUMSTANCES SHALL RHINO BE LIABLE FOR ANY LOSS OF BUSINESS, REVENUES, OR PROFIT OR OTHER INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES OR LOSS ARISING OUT OF ANY DEFECTS IN OR PERFORMANCE OF THE GASOLINE POWERED POST DRIVER, HOWSOEVER CAUSED.

To register your product:
Fill out and mail in registration card supplied with post driver Or online visit: http://rhinotool.com/contact-support/warranty-information/

A TRADITION OF QUALITY AND SERVICE SINCE 1975

WWW.RHINOTOOL.COM
Rhino Tool Company, Inc. | P.O. Box 111 | Kewanee, IL 61443 | 309.853.5555 | 866-707-1808

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals