fiberroad FR8000-OLS FR8000-OLS WEB-GUI Interface Optical Line System User Guide
- June 12, 2024
- FIBERROAD
Table of Contents
fiberroad FR8000-OLS FR8000-OLS WEB-GUI Interface Optical Line System
Product Information
- Product Name: FR8000-OLS
- Product Version: Release 2.0.0
- System Introduction: FR8000-OLS is a new generation optical line system designed for edge data center interconnection, specifically for IPoverDWDM applications.
- It offers a cost-effective solution that meets the transport capacity demand of more than 4T.
Chassis Specifications:
- Power Supply: (Optional) 2DC-48V, (Optional) 2AC 220V
- FAN: 4 units
- Operation Temperature: 0 ~ 50°C
- Altitude: 0-10,000ft
- Humidity: 5% ~ 95% (Non-condensing)
- Dimension: 430(D)355(W)265(H)nm
Chassis Indicator Instruction:
Indicator | Name | Description |
---|---|---|
PWR | Rack Power Supply Indicator | On: Power Supply in normal, Off: Power |
Supply in abnormal
PS_A| DC Power Supply_1 Indicator| On: Power Supply in normal, Off: Power
Supply in abnormal
PS_B| AC Power Supply_2 Indicator| On: Power Supply in normal, Off: Power
Supply in abnormal
PS_C| AC Power Supply_1 Indicator| On: Power Supply in normal, Off: Power
Supply in abnormal
PS_D| AC Power Supply_2 Indicator| On: Power Supply in normal, Off: Power
Supply in abnormal
Product Usage Instructions
Login:
- Initial IP address: 192.168.1.228
- Default User Name: Admin
- Password: 1234
System Information:
Parameter | Description |
---|---|
System Name | Default: None, Read Only |
System Location | Default: None, Read Only |
System Contact | Default: None, Read Only |
System Description | Default: Read Only |
System Running Time | Default: Read Only, Timer will be reset after power-off |
Software Version | Default: Read Only |
Revision History
Version| Date| Author| Reasons of Change Section(s)
Affected
---|---|---|---
1.0| 2017/12/04| | Initial Release All
2.0| 2021/05/01| | General Update All
System Introduction
FR8000-OLS is a new generation of the optical line system, apply to edge data center interconnection, particularly for IPoverDWDM applications. Provide a cost-effective and meet the transport capacity demand for more than 4T.
Key Feature
- Super T-bit Capacity
- Extra Long Distance -2000km, Without electric repeater transmission capacity.
- Support 100M to 400G mixed transmission.
- Smooth network update for high bandwidth.
- Whole network intelligent protection, high reliability.
- Line-side Support 1+1 Double port selecting redundancy protection
- The modular design of Power Supply, Fan Unit, Services Card for easy maintenance.
Various Format
- 1U/1.25U open and modularized chassis structure.
- 1/4 universal module slots
- High-density Mux/Demux
Intelligent Network Management
- Support SNMP、CLI、WEB、TELNET
- Completely visual graphic information
- Support electronic map positioning, fault location and isolation quickly and accurately
- Support voice alarm, e-mail alerts, SMS alerts approach, real-time online remote monitoring
- EMS Management platform, covering the entire Process from Plan to maintenance.
- Support fault quick diagnosis, one-click export resource statements
- Support Cable Fault point localization diagnosis, real-time detection cable quality.
- Support OPM transmission performance scan
Chassis specifications
System parameter
|
Description
---|---
Power Supply| (Optional)2DC-48V ,(Optional)2AC 220V
FAN| 4 FAN units
Operation Temperature| 0℃ ~ 50℃
Altitude| 0-10,000ft
Humidity| 5% ~ 95% (Non-condensing)
Dimension| 430(D)355(W)*265(H)nm
Chassis Indicator Instruction
Indicator
|
Name
|
Description
---|---|---
PWR
|
Rack Power Supply Indicator
| On: Power Supply in normal Off: Power Supply in abnormal
PS_A
|
DC Power Supply_1 Indicator
| On: Power Supply in normal Off: Power Supply in abnormal
PS_B
|
AC Power Supply_2 Indicator
| On: Power Supply in normal Off: Power Supply in abnormal
PS_C
|
AC Power Supply_1 Indicator
| On: Power Supply in normal Off: Power Supply in abnormal
PS_D
|
AC Power Supply_2 Indicator
| On: Power Supply in normal Off: Power Supply in abnormal
Network Management Interface
Login
Interface Introduction
System – System Information
Parameter | Description | Default |
---|---|---|
System Name | None | |
System Location | None | |
System Contact | None | |
System Description | Read Only | |
System Running Time | System Running Timer¹ | Read Only |
Software Version | Current Version No. | Read Only |
Notes: 1, Timer will be reset after power-off
System – Reboot System
Notes:
- Reboot button will reboot the system
- Default button will load factory default settings
System – Network Configuration
Parameter | Description | Default |
---|---|---|
IP Address | 192.168.1.228 | |
SubNet Mask | 255.255.255.0 | |
Gateway | 192.168.1.1 |
Notes:
- Apply to submit the configuration
- Refresh to verify the configuration
System — SNMP Configuration
SNMP Configuration | Description | Default |
---|---|---|
Get Community | Public/Private | Public |
Set Community | Public/Private | Private |
Tap Configuration | Description | Default |
--- | --- | --- |
ID | 1~5 | None |
Status | Enable/Disable | Disable |
Version | V1 / V2c | V2c |
Port | 162 | |
Community¹ | Public | |
IP Address | 0.0.0.0 |
Notes:
- The public community string is viewed as a “read-only” request, permitting the network administrator to view—but not modify—the remote device. The “private” community string is a more powerful option in that it allows the network administrator to “read/write” to the remote system.
System — FTP Configuration
Alarm – Alarm Table
System Alarm Log | Description | Default |
---|---|---|
No. | Item | None |
yy/mm/dd | Date | None |
hh/mm/ss | Time | None |
Slot | M: NMC Slot/01-15: services slot | — |
Alarm Info | Check list of Alarm Info | None |
Note: Download to save the Alarm Log as Excel file into PC
Panel – Refresh Panel
Check the update card status
Device– Shelf Information
Chassis Parameters | Description | Default |
---|---|---|
Description | Chassis Description | Read Only |
Temperature | Real-Time Temperature Detection | Read Only |
Fan | Fan A-B | Read Only |
Fan Status | Normal/Abnormal | Read Only |
Psu | PSU A&B DC power supply | Read Only |
Type | 48V DC Power/AC Power | Read Only |
Status | Normal/Abnormal | Read Only |
Device– Cards Information
Slot | Description | Default |
---|
Threshold
| When input power lower than threshold value, PUMP OFF
When output power lower than threshold, EDFA trigger alarm
|
None
Eyesafe Mode| | OFF
Working Mode
| AGC: Adjustable Gain ±1dB APC: Output adjustable ±1dB|
AGC
| ACC: Voltage adjustable|
Pump information| Real-time indication| Read Only
Gain| Power Gain Value| Base on parameters
Power| Output Power Value| Read Only
Device – Search Devices
Note:
- Mainly search for a neighbour, apply for remote/neighbour discovery, monitoring.
User – User Management
User Account Configuration | Description | Default |
---|---|---|
User Name | Total 2 account | admin |
Password | 1234 | |
Confirm Password | 1234 | |
Delete | As Needed | None |
Utility – Date Management
Date Management | Description | Default |
---|---|---|
Time Set | As needed | None |
Utility – Serial Information
Serial Information | Description | Default |
---|---|---|
Baud Rate | 115200 | Read Only |
Data Bits | 8 | Read Only |
Parity | None | Read Only |
Stop Bits | 1 | Read Only |
Flow Control | None | Read Only |
Utility – HTTP Port
Note:
- Take effect after restarting the system
-
Fiberroad may make changes at any time to the products or specifications contained herein without notice Fiberroad is trademarks of Fiberroad technology Co.,Ltd.©2021 Fiberroad technologu co.,ltd All right reserved
-
Copyright©2021 Fiberroad Technology Co., Ltd. All rights reserved. No part of this publication may be reproduced, stored in a retrieval system or transmitted in any form, be it electronically, mechanically, or by any other means such as photocopying, recording or otherwise, without the prior written permission of Fiberroad Technology Co., Ltd. (Fiberroad)
Information provided by Fiberroad is believed to be accurate and reliable. However, no responsibility is assumed by Fiberroad for its use nor for any infringements of patents or other rights of third parties that may result from its use. No license is granted by implication or otherwise under any patent rights of Fiberroad. -
The information contained in this publication is subject to change without notice.
Trademarks
- Fiberroad’s trademarks have been identified as such. However, the presence or absence of such identification does not affect the legal status of any brand.
- Units of Measurement
- Units of measurement in this publication conform to SI standards and practices.
- May 01, 2021
- Version number: 2.0.0
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>