askar A-NUC95-A1B Turing AC Pro Compact Fanless 12/13th Gen NUC Chassis User Manual
- June 12, 2024
- Askar
Table of Contents
askar A-NUC95-A1B Turing AC Pro Compact Fanless 12/13th Gen NUC Chassis
Product Information
- Product Code: A-NUC95-A1B / A-NUC95-M1B
- Thermal gap filler
- Thermal compound
- Screws for motherboard (M3)
- Washer
- Thermal gap filler (for M.2 SSD)
- EMI gasket
- 2.5 HDD/SSD screws (M3)
- 2.5 HDD/SSD mounting bracket
- HDD protective film
- SATA adapter cable
- Screws
- End cover
- Standoffs
- Case feet kit
- USB 3.2 Gen 2 ports
- Power LED
- Power switch
- Kensington lock hole
- Rear I/O opening
- Antenna fitting holes
- Copper heatsink for heat transfer
- M/B mounting standoffs
Product Usage Instructions
- Before handling any PC components, ensure that you are in an ESD-controlled workstation. If not available, wear an antistatic wrist strap or touch an earthed surface to prevent electrostatic discharge (ESD) damage to system components.
- Be cautious when unpacking and setting up the product as the metal edges can cause injury if not handled with care. Keep the product away from children.
- Refer to the provided installation guide for step-by-step instructions on setting up the product.
- For motherboard installation, use the screws provided (M3) along with the washers and standoffs to securely mount the motherboard.
- Apply the thermal compound and use the thermal gap filler to ensure proper heat transfer between the components.
- Connect the custom SATA cable for HDD/SSD connection. Refer to the installation guide for detailed instructions.
- For HDD/SSD installation, use the provided screws (M3) and mounting bracket to securely mount the drives. Use the HDD protective film if required.
- Install the end cover and case feet as per the installation guide.
- If applicable, connect the USB 3.2 Gen 2 ports to the appropriate connectors on the motherboard.
- Connect the power LED and power switch cables to their respective connectors on the motherboard.
- Securely fit the product using the Kensington lock hole if available.
- Ensure proper cable management inside the product for efficient airflow and organization.
- Refer to the product manual for any additional customization options or specific usage instructions.
Note: The above instructions are a general guideline. Please refer to the specific product manual for detailed instructions and safety precautions.
CAUTION
Electrostatic discharge (ESD) can damage system components. If an ESD-
controlled workstation is not available, wear an antistatic wrist strap or
touch an earthed surface before handling any PC components.
WARNING
Please be careful when unpacking and setting up this product as metal edges
can cause injury if not handled with care. Keep away from children.
Contents
①② Thermal gap filler ③ Thermal compound ④ Screws for motherboard (M3) ⑤ Washer ⑥ Thermal gap filler (for M.2 SSD) ⑦ EMI gasket ⑧2.5” HDD/SSD screws (M3) ⑨ 2.5” HDD/SSD mounting bracket ⑩ HDD protective film ⑪ SATA adapter cable ⑫⑬ Screws ⑭ End cover ⑮ Standos ⑯ Case feet kit
Front Panel Layout
Rear Panel Layout
Internal Layout
Installation
Case Feet Installation
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>