INNOPRO EP832 Smart Gateway Instruction Manual
- June 5, 2024
- INNOPRO
Table of Contents
INNOPRO EP832 Smart Gateway
Smart Gateway
The smart gateway downlink communicates with various Zigbee detectors through
the Zigbee protocol, and accesses the external communication network through
the protocol in the uplink to realize the conversion function of Zigbee
protocols. At the same time, multiple detectors can be connected to reduce the
cost of network construction, which has become an indispensable key point for
Zigbee network deployment. It can be applied to various smart home, smart
shopping mall, smart toilet, smart bus, medical monitoring and other
application scenarios. An example of product appearance is shown in Figure 1.
Features
- Desktop installation method.
- Zigbee
- Intelligent linkage, remote control.
- Can bring 32 weak current detectors, or 35 strong current detectors plus 10 weak current detectors.
- Use encryption to transmit information, super security and privacy protection.
- Ultra-small appearance, simple design.
Technical parameters
Physical Properties：
Product Model：EP832| Transmission distanc：≤130m (open visual distance)
Product number：PB0832BZ00/01/02/XX| Antenna Type：Onboard Antenna
Product size：62mm 62mm 8.5mm| LED indicator：blue1; red1
Working voltage：DC 5V| Installation method：3M glue or desktop placement
Working current：≤150mA| Working temperature：-10℃～55℃
Interface capability：USB Type-C (DC 5V) interface*1| Working humidity：≤95
%(non-condensing)
Communication method：Zigbee 2.4GHz|
Radio frequency characteristics：
Radio frequency：2.4GHZ| Network standard：Zigbee3.0 standard
Installation Notes
- Select the appropriate installation location;
- Place on a suitable desktop or a small flat space.
- The function keys and power socket on the product, as shown in Figure 2.
Operation settings
-
Preparation for use:
Download and open the APP, search for “Tuya” in the app store, and download the APP. After the installation is complete, register, log in, and use. -
Network settings:
Connect the gateway to the power supply;
Confirm that the distribution network indicator (red light) is flashing (if the indicator is in other states, press and hold the “function key” until the red light flashes);
Make sure that the mobile phone is connected to the 2.4GHz band router at home, and the mobile phone and the gateway are in the same local area network;
Open the APP homepage, click the add button “+” in the upper right corner of the page;
Click “Gateway Central Control” on the left side of the page, and select the wireless gateway (Bluetooth) accord ing to the chart.
Follow the prompts to connect the device to the network;
After the addition is successful, you can find the device in the “My Home” list; -
Press and hold the function key for 5 seconds, the blue light and red light are always on, release the key, and the recovery is successful.
FCC Rules
FCC Warning Statement Changes or modifications not expressly approved by the
party responsible for compliance could void the users authority to operate the
equipment. This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limíts are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions,
may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause
harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct
the interference by one
or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired operation.
RF Exposure Statement
maintain compliance with FCs RF EXposure guidelines, This equipment should be
installed and operated with a minimum distance of 20 cm the radiator of your
body. This devise and its antennas) must not be co-located or operated in
conjunction with any other antenna or transmitter.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>