RHINO 301002 Gas-Petrol Post Driver Owner’s Manual
- June 12, 2024
- RHINO
Table of Contents
RHINO 301002 Gas-Petrol Post Driver
Product Information:
- Product Name: Multi-ProTM Gas/Petrol Post Driver
- Model Numbers: 301002 / 301003 / 301007 / 301012 / 301014
- Serial Numbers: 5005459 or XA04599 and higher
- Manufacturer: Rhino Tool Company, Inc.
Product Usage Instructions
Safety Precautions:
- Read the owner’s manual carefully and keep it available for reference at all times.
- Take safety seriously and follow all safety instructions provided.
- The owner’s manual is a permanent part of the post driver and should remain with it if resold, rented, or loaned.
- Do not disassemble the crankcase as it will void the warranty.
Parts and Accessories:
- The product comes in two configurations: Multi-ProTM Standard and Multi-Pro XA (extended anvil).
- Refer to page 24 for Multi-Pro XA parts and accessories.
- The manual provides a detailed list of part numbers and descriptions for various components of the post driver.
Assembly:
- Follow the assembly instructions provided in the manual to properly assemble the post driver.
- Ensure all bolts, springs, handles, and other components are securely attached as per the instructions.
Usage:
- Prior to use, make sure to familiarize yourself with the controls and features of the post driver.
- Use appropriate adapters (Chuck-LokTM System 1 or System 2) based on the size of the post being driven.
- Attach the chuck or anvil securely to the lower body of the post driver.
- Hold the post driver firmly using the top handle and side handle.
- Position the post driver over the post and align it properly.
- Activate the throttle control to start the driver and begin driving the post into the ground.
- Follow recommended safety practices while operating the post driver.
Maintenance:
- Regularly inspect the post driver for any signs of damage or wear.
- Replace any worn-out or damaged parts with genuine Rhino Tool Company parts.
- Keep the post driver clean and free from dirt, debris, and moisture.
- Store the post driver in a safe and dry place when not in use.
Please refer to the complete owner’s manual for detailed instructions, safety information, and troubleshooting tips.
Multi-Pro™ and Multi-Pro XA*
*extended anvil
GAS/PETROL POST DRIVER OWNERS MANUAL
Serial Numbers: 5005459 or XA04599 and higher
MODEL: 301002 / 301003 / 301007 / 301012 / 301014
TAKE SAFETY SERIOUSLY
Your safety, and the safety of others, is very important. The proper and safe
use of your Rhino® post driver is an important responsibility and should be
taken seriously.
Keep this owner’s manual available, so you can refer to it at any time. This
owner’s manual is considered a permanent part of the post driver and should
remain with the post driver if resold.
The information and specifications included in this publication were in effect
at the time of approval for printing. Rhino Tool Company, Inc. reserves the
right, however, to discontinue or change specifications or design at any time
without notice and without incurring any obligation whatever. No part of this
publication may be reproduced without written permission from:
Rhino Tool Company
This owner’s manual is considered a permanent part of the post driver and should remain with the post driver if resold, rented or loaned.
This book contains important safety information. Please read it carefully.
To help you make informed decisions about safety, you will find important safety information in a variety of forms, including:
- Safety Labels on the post-driver
- Safety Messages Preceded by a safety alert symbol and one of three signal words, DANGER, WARNING, or CAUTION. These signal words mean:
DANGER
Immediate hazards that will result in severe personal injury or death.
WARNING
Hazards or unsafe practices that could result in personal injury.
CAUTION
Hazards or unsafe practices that could result in injury, product or property
damage.
- Safety Headings such as IMPORTANT SAFETY INFORMATION.
- Safety Section such as POST DRIVER SAFETY.
- Instructions how to use this post driver correctly and safely.
Rhino® Multi-Pro™ Parts and Accessories List
Multi-Pro™ Standard Configuration
No. | P/N | Description |
---|---|---|
1 | 300712 | Ground Bolt |
2 | 301016 | Body Assembly with Cylinder and Bearings |
3 | 301222 | Top Handle Assembly |
4 | 300715-4 | Pro Series Handle Bolt (qty. of 4) |
5 | 301221-2 | Handle Collar Set (qty. of 2) |
6 | 610010-4 | Handle Springs (qty. of 4) |
7 | 300214 | Top Handle Bracket |
8 | 301075 | Piston and Connecting Rod Assembly |
9 | 301610-2 | Piston and Hammer O-ring Seal Set (qty. of 2) |
10 | 301085 | Multi-Pro™ Hammer |
11 | 301097 | Multi-Pro™ Anvil O-ring Retainer |
12 | 301614-2 | Large Retainer O-ring Seal Set (qty. of 2) |
13 | 301105 | Multi-Pro™ Large Retainer |
14 | 301098 | Multi-Pro™ Anvil O-ring Cup |
15 | 301165 | Anvil (See page 27 for Extended Anvil.) |
16 | 301615 | Multi-Pro™ Anvil O-ring Seal |
19 | 301099 | Multi-Pro™ Sleeve for Lower Body |
20 | 301032 | Multi-Pro™ Lower Body |
21 | 300750-4 | Multi-Pro™ Lock Washers (qty. of 4) |
22 | 300701-4 | Lower Body Bolt Set (qty. of 4) |
23 | 301158 | Multi-Pro™ Master Chuck |
--- | --- | --- |
24 | 300717-4 | Multi-Pro™ Chuck Bolt Set (qty. of 4) |
25 | 301920 | Chuck-Lok™ Locking Nut (1 per driver) |
26 | 300221 | 8.5″ (216mm) EPDM Foam Grip (1 per driver) |
27 | 301232 | Pro-Series Side Handle Assembly |
28 | 300250 | Throttle Control Assembly |
29 | 301233 | Lower Handle Assembly |
30 | 300900 | Chuck-Lok™ System 1″ (25.4 mm) Adapter |
31 | 300895 | Chuck-Lok™ System 1¾” (44.45 mm) Adapter |
32 | 300902 | Chuck-Lok™ System 2″ (50.8 mm) Adapter |
33 | 301600 | Top Throttle |
34 | 301155 | Multi-Pro™ Tent Stake Chuck |
No. | P/N | Description |
---|---|---|
2 | 301016 | Body Assembly with Cylinder and Bearings |
38 | 300782-4 | Retaining Ring Set for Crankshaft & Clutch Drum with Pinion Gear |
(qty. of 4)
39| 300200| Gear
40| 300730| Machine Key
41| 300700-4| Clutch Housing Bolt Set (qty. of 4)
42| 300025| Clutch Housing with Bearings
43| 300120| Clutch Drum with Pinion Gear
44| 300132| Pro-Series™ Crankcase Cover – Threaded
45| 301617| O-ring Seal for Pro-Series™ Crankcase Cover – Threaded
46| 300050| Crank Pin (Left Hand Threads)
47| 300704-6| Crankcase Bolt Set (qty. of 6)
48| 300040| Crankshaft
NOTE
Disassembly of the Crankcase will break the tamper evident seal, thereby
voiding the warranty on the driver
**Multi-Pro™ XA Lower Body Configuration***
Please refer to the Multi-Pro Standard Configuration for parts information on the upper portion of the Multi-Pro XA.
No. | P/N | Description |
---|
Multi-Pro XA ™ ONLY
11| 301115| Multi-Pro™ Anvil O-ring Retainer
12| 301614-2| Large Retainer O-ring Seal Set (qty. of 2)
13| 301105| Multi-Pro™ Large Retainer
14| 301098| Multi-Pro™ Anvil O-ring Cup
16| 301615| Multi-Pro™ Anvil O-ring Seal
19| 301099| Multi-Pro™ Sleeve for Lower Body
20| 301032| Multi-Pro™ Lower Body
21| 300750-4| Multi-Pro™ Lock Washers (qty. of 4)
22| 300701-4| Lower Body Bolt Set (qty. of 4)
23| 300717-4| Multi-Pro™ Chuck Bolt Set (qty. of 4)
24| 301920| Chuck-Lok™ Locking Nut (1 per driver)
29| 300900| Chuck-Lok™ System 1″ (25.4 mm) Adapter
30| 300895| Chuck-Lok™ System 1¾” (44.45 mm) Adapter
31| 300902| Chuck-Lok™ System 2″ (50.8 mm) Adapter
32| 301169| Multi-Pro Extended Anvil
34| 301420| Multi-Pro™ Extended Master Chuck
35| 301159| Multi-Pro™ Channel Post Chuck (Slotted Chuck)
No. | P/N | Description |
---|---|---|
49 | 300180 | Shroud |
50 | 300181-2 | Grommet (qty. of 2) |
51 | 300190-2 | Shroud Spacer (qty. of 2) |
52 | 300706-2 | Shroud Bolt (qty. of 2) |
53 | 300705-2 | Lower Shroud Bolt (qty. of 2) |
300240 | Honda GX35 Engine | |
Honda Engine Parts are Available from Your Local Honda Dealer | ||
300805 | Safety Label and Tag Set | |
301801 | Multi-Pro™ Operating, Safety, and Parts Manual |
Please refer to the Multi-Pro Standard Configuration for parts information on the upper portion of the Multi-Pro XA.
No. | P/N | Description |
---|
Accessories
31| 300902| Chuck-Lok™ System 2″ (50.8mm) Adapter
30| 300895| Chuck-Lok™ System 1¾” (44.4mm) Adapter
29| 300900| Chuck-Lok™ System 1″ (25.4mm) Adapter
24| 301920| Chuck-Lok™ Locking Nut (1 required)
| 301159| Multi-Pro™ Slotted Chuck
| 301169| Multi-Pro™ Extended Anvil
| 301175| Multi-Pro™ U-Channel Drive Kit (includes 301159, 301169)
| 301155| Multi-Pro™ Tent Stake Chuck
| 301400| Large Chuck Adapter (required for all large chucks) Plate*
| 301425| Multi-Pro™ Square Tube Chuck
| 300932| Drive cap for 1¾” (44.4mm) Square Tube
| 300958| Drive cap for 2″ (50.8mm) Square Tube
| 300959| Drive cap for 2¼” (57.15mm) Square Tube
| 300960| Drive cap for 2½” (63.5mm) Square Tube
| 301403| Multi-Pro™ 3½” Round Chuck Assembly
| 301405| Multi-Pro™ 4″ Round Chuck Assembly
| 301415| Multi-Pro™ 3″ Square Chuck Assembly
| 301414| Multi-Pro™ 3″ Round Chuck Assembly
34| 301420| Multi-Pro™ Extended Master Chuck
No.| P/N| Description
---|---|---
| 301422| Multi-Pro™ XA Square Tube Chuck
| 301000| ¼” Long Arm Hex Key
| 300500| Rhino® Pro Series Lubricant
| 300506| Rhino® Pro Series Lubricant – 12-pack
| 301509| Multi-Pro™ Service Kit
Bolt Torque Specifications
4| 300715-4| Pro Series Handle Bolts (qty. of 4) – 132 lb/in (14.91 Nm)
21| 300701-4| Lower Body Bolts (qty. of 4) – 251 lb/in (28.3 Nm)
23| 300717-4| Multi-Pro™ Chuck Bolt Set (qty. of 4) – 251 lb/in (28.3 Nm)
41| 300700-4| Clutch Housing Bolt (qty. of 4) – 95.0 in/lbs (10.73 Nm)
46| 300050| Crank Pin (Left Hand Threads) – 360.0 in/lbs (40.6 Nm)
47| 300704-6| Crankcase Bolt (qty. of 6) – 75.0 in/lbs (8.5 Nm)
52| 300706-2| Shroud Bolt (qty. of 2) – 56.4 in/lbs (6.37 Nm)
53| 300705-2| Shroud Bolt – Self Tapping (qty. of 2) – 56.4 in/lbs (6.37 Nm)
- Requires 301169 Multi-Pro™ Extended Anvil
- Requires 301425 Square Tube Chuck
- Requires 301400 Large Chuck Adapter Plate
Limited Lifetime Impact Warranty Gasoline Powered Post Drivers
Warranty: Rhino Tool Company, Inc. (“Rhino”) warrants to the original
purchaser, purchasing the Equipment in new condition, in original packaging
from an authorized dealer that its Gasoline Powered Post Driver will be free
from defects in workmanship and materials (the “Limited Warranty”). The
Limited Warranty shall survive for the lifetime of the product with respect to
the Hammer and Anvil components and for twelve (12) months with regard to all
other components, excluding the Honda GX35 engine for which Rhino provides no
warranty and for which the warranty provided by American Honda Motor Co., Inc.
shall be the sole warranty applicable thereto. This Limited Warranty is non-
transferable. For Warranty Claims contact your dealer or distributor. Proof of
purchase date and serial number is required. In the event of a warranty
repair, the post driver should be returned to a Registered and Warranty
Authorized Rhino Servicing Dealer. Rhino’s obligation under this Limited
Warranty is expressly limited to the repair or replacement, at Rhino’s
election, of such defective Gasoline Powered Post Driver, which is proved to
be defective upon inspection by a Rhino-certified/authorized technician.
This Limited Warranty does not extend to a Gasoline Powered Post Driver which
has been subject to misuse, neglect, or accident, nor does it extend to any
Gasoline Powered Post Driver which has been repaired, altered, or serviced by
unauthorized persons. This Limited Warranty does not cover any damage or
adjustments required to any Gasoline Powered Post Driver if such damage or
adjustment is caused by the use of supplies, parts, or attachments not sold or
approved by Rhino
EXCEPT AS OTHERWISE PROVIDED HEREIN, RHINO DISCLAIMS ALL OTHER WARRANTIES,
EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. UNDER NO CIRCUMSTANCES
SHALL RHINO BE LIABLE FOR ANY LOSS OF BUSINESS, REVENUES, OR PROFIT OR OTHER
INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES OR LOSS ARISING OUT OF
ANY DEFECTS IN OR PERFORMANCE OF THE GASOLINE-POWERED POST DRIVER, HOWSOEVER
CAUSED.
Registration/Warranty Claims: The purchase of a Rhino Tool, as outlined in the
warranty terms, automatically serves as the product registration and the start
of the customer’s 1 year warranty. Visit
https://rhinotool.com/service/warranties/gas-petrol-post-drivers/or call
your Rhino Dealer or Rhino customer service toll-free at
1-866-707-1808 for assistance.
End of Lifecycle: When your Rhino Gas Powered Driver (Ranch Pro, Fence Pro, Multi-Pro or Multi-Pro XA) is coming to the end of its lifecycle, destruction of the unit needs to be conducted according to international and local environmental regulations. The gas-powered driver contains:
- Fuel
- Oil
- Grease
- Electric components
- Plastic, steel and aluminum components.
TROUBLESHOOTING
Call your local dealer, service center or Rhino Tool
Company for more assistance with your post driver
© 2013, 2015, 2017, 2021 Rhino Tool Company Inc., – All Rights Reserved
A TRADITION OF QUALITY AND SERVICE SINCE 1975
Rhino Tool Company, Inc. | P.O. Box 111 | Kewanee, IL 61443
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>