Earbuds Y12 Bluetooth Stereo Earphone User Manual

Earbuds Y12 Bluetooth Stereo Earphone

Product Information

• Product Type: Bluetooth Stereo Earphones
• Model: Y12
• Model NO: A/0
• Version: 2022-07-20
• Approval Date: [Not specified]

PRODUCTS OUT-LINE

• 1-1 ASSORTMENT: Stereo Bluetooth headset
• 1-2 Mode NO: Y12
• 1-3 Speaker: 13mm copper ring speaker
• 1-4 SPEAKER POWER: Rated input power: 3mW, Maximum input power: 10mW
• 1-5 IMPEDANCE: [Not specified]
• 1-6 APPEARANCE: [Not specified]
• 1-7 NET WEIGHT: Approx. 64.0g
• 1-8 RELATION DRAWING: [Not specified]

Product Dimension

• Model no: Y12
• Page: 3 of 10

Introduction
The product has the following features and functions:

• Power on/off
• Play mode
• Call mode
• Volume mode
• Headphone TWS pairing connection

Colour Matrix
The product is made of ABS and TPE materials.

PRODUCTS OUT-LINE

• Frequency Range: [Not specified]
• Impedance: [Not specified]
• Interface Type: [Not specified]
• Sensitivity: [Not specified]
• Maximum carrying power: [Not specified]
• Speaker unit: Diameter 13mm*2
• Weight: 64.0g
• Bluetooth version: [Not specified]
• Support for Bluetooth profiles: HFP, HSP, A2DP, AVRCP
• Working distance: 10m
• Ios android / Driver Type/Diameter: [Not specified]
• Lithium battery capacity: 110+110mAh
• Voltage: 3.7V
• Charging time: 1H
• Usage time: 160H
• Earmuffs: none

Product Usage Instructions

Power On/Off:

1. Pick up the earphones from the charging compartment to automatically power on.
2. Or, press and hold the function button of the headset for about 3 seconds or more to power on.
3. To power off, put the earphones into the charging compartment or press and hold the function button for about 5 seconds until they turn off.

Play Mode:
Touch the function key once to pause/play.

Call Mode:

• Touch the function key once to answer/hang up a call.
• Long press the function key to refuse to listen.

Volume Mode:

• Two taps on the function key will increase the volume (R earphone).
• Two taps on the function key will decrease the volume (L earphone).

Headphone TWS Pairing Connection:

1. Pick up the L and R earphones from the charging compartment to automatically match.
2. L is the main ear and R is the auxiliary ear.
3. The red and blue lights of the main ear flash alternately, and the lights of the auxiliary ear go out.

In the State of Listening to Songs:

• Three taps on the function key will play the next song (R earphone).
• Three taps on the function key will play the previous song (L earphone).

Status of Use:

1. Put the headset into the charging compartment and fully charge it for about 60 minutes.
2. The charger fully charges the bin for about 2.5H (charging current 300MA/H).
3. Display the remaining power of the charging box (188 digital tube display).

Revision History

PRODUTS OUT-LINE

1-3

| Speaker :| 13mm copper ring speaker
1-4| SPEAKER POWER| Rated input power：3Mw.Maximum input power： 10mW
1-5| IMPEDANCE| 22Ω± 15%  Ohm         at 1000Hz. 0.126V
1-6| APPEARANCE| According to appearance drawing
1-7| NET WEIGHT| Approx：64.0g
1-8| RELATION DRAWING| Appearance Drawing

Product Dimension

Introduction

Power on/off:

1. Pick up from the charging compartment to automatically power on/or press and hold for about 3 seconds or more to power on
2. Put it into the charging compartment or press and hold the function button of the headset for about 5 seconds until it turns off
3. If only one earphone is put back into the charging compartment, the other earphone can still work
4. Play mode: touch the function key once – pause/play
5. Call mode: touch the function key once – answer/hang up Long press the function key – refuse to listen
6. Volume mode: two taps: volume up (R)

Headphone TWS pairing connection:

1. L, R earphones pick up L.R from the charging compartment to automatically match
2. L is the main ear and R is the auxiliary ear
3. The red and blue lights of the main ear flash alternately, and the lights of the auxiliary ear go out
4. In the state of listening to songs:
5. touch the function key three times: next song (R)
6. Tap the function key three times: previous song (L)

Power on/off:

1. Pick up from the charging compartment to automatically power on/or press and hold for about 3 seconds or moreto power on
2. Put it into the charging compartment or press and hold the function button of the headset for about 5 secondsuntil it turns off
3. If only one earphone is put back into the charging compartment, the other earphone can still work
4. Play mode: touch the function key once – pause/play
5. Call mode: touch the function key once – answer/hang up Long press the function key – refuse to listen
6. Volume mode: two taps: volume down (L)

Status of use:

1. Put the headset into the charging compartment and fully charge it for about 60 minutes
2. The charger fully charges the bin for about 2.5H (charging current 300MA/H)
3. Display the remaining power of the charging box (188 digital tube display)

When the mobile phone is not connected, double-click the multi-function button twice to switch between Chinese and English

Colour Matrix

(black)

NO.

| ****

Name

| ****

Describe

| Illustration

1

| ****

charge

| ****

black ABS

|

| | | | | | |
2| charge| black ABS

3

| ****

charging containe

| ****

r

| ****

black ABS

4

| ****

soft earphones

| ****

black TPE

5

| ****

decorative film

| black ABS+ plating

6

| ****

earphone battery

| ****

box

| ****

black ABS

7

| ****

ear shell

| ****

black ABS

8

| ****

digital tube

| ****

Black transparent acrlic film

PRODUTS OUT-LINE

Frequency Range

| 20Hz-20KHz
---|---

impedance

| 22Ω±15%

Interface Type

| wireless

Sensitivity

| 98±3dB
Maximum carrying power| 5mw

Speaker unit

| *Diameter 13mm2**

Weight

| 64.0g
bluetooth version| 5.3
Support for Bluetooth profiles| ****

HFP, HSP     A2DP     AVRCP

working distance

| About 10m line of sight
Ios android| not support wire control
Driver Type/Diameter| *13mm2
Lithium battery capacity| 110+110mAh**

Voltage

| 3.7V

charging time

| 1H

usage time

| 160H

earmuffs

| none

Characteristics

1

|

OPERATION(A)

| Input power：3mW sine wave
---|---|---

2

|

BUZZ & RATTLE

|

Input  frequency：100Hz-2000Hz,Input power: 0.20V

3

|

IMPEDANCE

|

22Ω±15%

4

| SOUND PRESSUER LEVEL|

98±3dB  (at 1KHz 1mW IEC-318)

5

|

POLARITY

| L and R channel drivers shall drive with same polarity
---|---|---
6| FREQUENCY RESPONSE| It shall resemble to standard frequency     within reasonable tolerance coupler
8 （ FREQUNCY RESPONSE ） **Input ： 1mW**

Speaker specification

Type

| permanent-magnet dynamic loudspeaker
item     eye| regulation grid| Measurement condition
Nominal impedance| 22Ω±15%| At 1000Hz
Lowest Resonance Frequency|

500Hz±20Hz

|

0.25V

Sensitivi ty| 98±3Db| At 1000Hz/1mW
Frequency Response| Fo~20,000Hz| Output S.P.L±5dB
Frequency range| 20~20,000Hz| 3mW Test (attachment)
---|---|---
Input Power|

Rated Power Input 3mW

|

Max. Power Input 5mW

Distortion

| MAX≦3%| less @3mW 1000Hz more than
Pure tone detection| sine wave 0.25V sine wave| 50-16000Hz, No abnormalities.

Must be normal at sine

Diagram form

Frequency response curve

General Characteristics

to Normal operation, no and remarkable damages, cracks, rust and distortion which may cause malfunction.

4| TEMPERATURE-           HUMIDITY TEST| Temperature 40±2℃、placed 24 hours, humidity 90%～ 95%,after trial and placed 2 hours in normal temperature. DUT ,should not find any defect in functional or external appearance ,performance.
5| HIGH TEMPERATURE TEST| Temperature 60±2℃、humidity 30% 24 hours of inside place, after trial and placed 2 hours in normal temperature. DUT , should not appear defect on external appearance, performance.
6| LOWTEMPERATURE TEST|

Placed 24 hours in humidity -20±2℃ Temperature, after trial and placed 2 hours in normal temperature and then carry out the test, the DUT should not appear defect on external appearance ,performance.

7| HIGH-LOW TEMPERATURE CYCLE TEST| 60±2℃ 1hours→-20±2℃ 1hours,as 1 cyc. Total 3 cycs, after trial and placed 2 hours in normal temperature and then carry out the test, should not appear defect on external appearance ,performance.
8| CONTINUOUS OF CHARGE TEST| Place earphone at the free interspace and at the radiation state then throw 3mW WHITE NOISE to the input part and last 96 hours should no defect.

IC Warning

This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions:

1. This device may not cause interference;
2. This device must accept any interference, including interference that may cause undesired operation of the device.

The information listed above provides the user with information needed to make him or heraware of a RF exposure, and what to do to assure that this radio operates within the FCC exposure limits of this radio.

The device complies with RF specifications when the device used at 5mm from the body.Third-party belt-clips, holsters, and similar accessories used by this device should not contain any metallic components. Body-worn accessories that do not meet these requirements may not comply with RF exposure requirements and should be avoided. Use only the supplied or an approved antenna.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>