B09WJL7P5K Twinkly Dots Instruction Manual

: June 12, 2024
: Twinkly

Table of Contents

B09WJL7P5K Twinkly Dots
Product Information
Product Usage Instructions
attention
BUTTON
setup twinkly
connection modes
mapping
mapping tips
troubleshooting
reset twinkly
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

B09WJL7P5K Twinkly Dots

Product Information

The product is a Generation II dots (USB version) designed for seasonal use. It is an electric product that should be used indoors and can be used outdoors if marked suitable for indoor and outdoor use. The product should be connected to a Ground Fault Circuit Interrupting (GFCI) outlet when used outdoors. It is not intended for permanent installation or use and should not be placed near sources of heat such as gas or electric heaters, fireplaces, candles, etc. The product should not be secured with staples or nails, and should not be placed on sharp hooks or nails. Lamps should not rest on the supply cord or any wire. It is important to unplug the product when leaving the house, retiring for the night, or if left unattended. The product should not be played with or placed where small children can reach it to avoid the risk of fire, burns, personal injury, and electric shock. It should only be used for its intended purpose and ornaments or other objects should not be hung from the cord, wire, or light string. The product should not be covered with cloth, paper, or any material not part of the product when in use. Doors or windows should not be closed on the product or extension cords as it may damage the wire insulation. All instructions provided with the product should be read and followed.

Product Usage Instructions

Follow these instructions for the proper usage and care of the product:

When using the product on a live tree, ensure that the tree is well-maintained and fresh. Do not place the product on live trees with brown needles or easily breakable needles. Keep the live tree holder filled with water.
If placing the product on a tree, make sure the tree is well-secured and stable.
Before using or reusing the product, carefully inspect it. Discard any products with cut, damaged, or frayed wire insulation or cords, cracks in the lamp holders or enclosures, loose connections, or exposed copper wire.
When storing the product, remove it carefully from wherever it is placed, including trees, branches, or bushes, to avoid strain or stress on the conductors, connections, and wires.
Store the product neatly in a cool, dry location protected from sunlight when not in use.

WARNING: To reduce the risk of fire and electric shock:

Do not install the product on trees with metal needles, leaves, or branch coverings.
Avoid mounting or supporting wires in a way that can cut or damage wire insulation.

Class A Disclaimer: This equipment has been tested and found to comply with the limits for a Class A digitaldevice, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

attention

READ AND FOLLOW ALL SAFETY INSTRUCTIONS.
Do not use seasonal products outdoors unless marked suitable for indoor and outdoor use. When products are used in outdoor applications, connect the product to a Ground Fault Circuit Interrupting (GFCI) outlet. If one is not provided, contact a qualified electrician for proper installation.
This seasonal use product is not intended for permanent installation or use.
Do not mount or place near gas or electric heaters, fireplaces, candles, or other similar sources of heat.
Do not secure the wiring of the product with staples or nails, or place on sharp hooks or nails.
Do not let lamps rest on the supply cord or on any wire.
Unplug the product when leaving the house, or when retiring for the night, or if left unattended.
This is an electric product — not a toy! To avoid the risk of fire, burns, personal injury, and electric shock it should not be played with or placed where small children can reach it.
Do not use this product for other than its intended use.
Do not hang ornaments or other objects from the cord, wire, or light string.
Do not cover the product with cloth, paper, or any material not part of the product when in use.
Do not close doors or windows on the product or extension cords as this may damage the wire insulation.
Read and follow all instructions that are on the product or provided with the product.
SAVE THESE INSTRUCTIONS.
Do not connect the chain to the supply while it is in the packing.
Where breakage or damage to lamps occurs the chain must not be used/energised but disposed of safely.
The lamps are not replaceable.
WARNING – RISK OF ELECTRIC SHOCK IF LAMPS ARE BROKEN OR MISSING. DO NOT USE.

Use and care instructions

When the product is placed on a live tree, the tree should be well maintained and fresh. Do not place on live trees in which the needles are brown or break off easily. Keep the live tree holder filled with water.
If the product is placed on a tree, the tree should be well-secured and stable.
Before using or reusing, inspect the product carefully. Discard any products that have cut, damaged, or frayed wire insulation or cords, cracks in the lamp holders or enclosures, loose connections, or exposed copper wire.
When storing the product, carefully remove the product from wherever it is placed, including trees, branches, or bushes, to avoid any undue strain or stress on the product conductors, connections, and wires.
When not in use, store neatly in a cool, dry location protected from sunlight.

WARNING – To reduce the risk of fire and electric shock:

Do not install on trees having needles, leaves or branch coverings of metal or materials which look like metal.
Do not mount or support wires in a manner that can cut or damage wire insulation.

Class A Disclaimer: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/television technician for help.

WARNING!
Do not connect the light string to the power supply while it is in the packaging. The connecting cable cannot be repaired or replaced. THE LAMPS ARE NOT REPLACEABLE. The lighting chain must not be used without all gaskets being in place. Lighting chains don’t intend for interconnection. Do not connect this light string electrically to devices from another manufacturer. CAUTION! Strangulation hazard. Keep out of reach of young children.

The crossed-out wheeled bin symbol indicates that the item should be disposed of separately from household waste. The item should be handed in for recycling in accordance with local environmental regulations for waste disposal.

The manufacturer, Ledworks Srl, declares that this device complies with the (LVD) 2014/35/EU, (RED) 2014/53/EU, (EMC) 2014/30/EU, (RoHS) 2011/65/EU, (REACH) 1907/2006 directives. The full text of the EU declaration of conformity is available at the following Internet address: www.twinkly.com/certifications

System Requirement
The minimum system requirement for mobile phones are iOS 11 and Android 5 Check the app store for the latest update to ensure the best performance.

Technical Specifications

Power supply: see label
IP protection: IP20

Premium grade LED diodes
To ensure high color rendering, Twinkly products only use high-quality LEDs. Twinkly’s RGB and RGB+W products are produced according to quality principles and processes that allow us to obtain a high degree of primary color purity.The minimum excitation purity values of the Blue, Green and Red components are shown within the table below.

values apply only to RGB (STP) and RGBW (SPP) products, not AWW (GOP) products

Decorate your interiors or spaces with Twinkly Dots.
Use provided circular double adhesive sticker to position Twinkly Dots.
Connect the USB plug into a USB port, and the lights will switch on.

CONTINUOUS GREEN: Direct Wi-Fi mode, connected
FLASHING GREEN: Direct Wi-Fi mode, no device connected
CONTINUOUS BLUE: Home Wi-Fi network mode, connected
FLASHING BLUE: Home Wi-Fi network mode, connection in progress
FLASHING RED: Home Wi-Fi network mode, unable to connect

BUTTON

LED INDICATOR

Go to App Store/Google Play Store (or scan QR code).
Download and install the Twinkly app Note: All app illustrations in this document are a mere representation of the functionality and might vary from the actual app visuals.

setup twinkly

Launch Twinkly app.
Sign up/log in to your account (necessary for using smart home features).
Follow the setup process on the app.

connection modes

Twinkly uses Bluetooth for the setup process only. Wi-Fi connection is required for operation. You can use:

A. Home Wi-Fi network connection (recommended):
Connect with your home/office WiFi from the list of available networks.
B. Direct Wi-Fi connection:
Select “Twinkly_xxxxxx” WiFi from the list of available networks. Password: Twinkly2019 (NOTE: the internet on your phone will not be available in this case)

mapping

Map the layout of your decoration to unlock the full potential of your Twinkly lights, such as advanced effects, drawing, and many upcoming features . B09WJL7P5K-Twinkly-Dots-fig-8

mapping tips

B09WJL7P5K-Twinkly-Dots-fig-9

troubleshooting

THE LIGHTS DO NOT SWITCH ON

Check that the power adapter is plugged in and that the controller is correctly connected to the device
Check that the LED status indicator on the controller is lit
Briefly press the button on the controller
If this doesn’t work, unplug the power adapter, wait 30 seconds and plug in again

THE LIGHTS TURNED ON BUT ARE BLOCKED

Briefly press the button on the controller
If this does not work, unplug the power adapter, wait 30 seconds and plug it in again

THE LED INDICATOR IS LIGHT BLUE, BUT MY SMART- PHONE CANNOT FIND TWINKLY

Unplug the power adapter, wait 30 seconds, plug it in again and repeat Configuration procedure
If this does not work, try to Reset (see Reset procedure below)
If this won’t work, see online reference manual help.twinkly.com
HOW CAN I CONNECT TWINKLY WITHOUT HOME WI-FI NETWORK?
Open Wi-Fi settings on your smartphone
Find and select “Twinkly_XXXXXX” network
Enter the Wi-Fi password “ Twinkly2019 ” and ensure that the “Twinkly_XXXXXX” network is connected
TWINKLY SETUP WAS SUCCESSFUL, BUT THE LIGHTS
DON’T RESPOND TO COMMANDS
Within the Twinkly application, open “Devices” and check that the Twinkly device is selected
If this does not work, stop the Twinkly application and launch it again
If this does not work, try to Reset (see Reset procedure below)
If this does not work, delete the Twinkly application from your smartphone, then download the latest version from AppStore or Google Play Store

If you have any problems, please write to support@twinkly.com

reset twinkly

B09WJL7P5K-Twinkly-Dots-fig-10

Unplug Twinkly from the power socket. Press and hold the controller button.
While holding the button, plug in Twinkly.
Keep holding the button until all LEDs turn red (or amber for Gold Edition), then release the button.

online manual

Browse, play and edit effects.
Create new effects.
Group multiple devices together.
Synchronize with music.
Download new effects.
Control with Smart Home Assistant.