twinkly 300 L Light Tree Instruction Manual

: May 15, 2024
: Twinkly

Table of Contents

Download The Twinkly
Physical Setup
Attention
Controller
A. Home Wifi Network Connection
B. Direct Wi-fi Connection
Reset Twinkly
Mapping
Customer Support
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

twinkly 300 L Light Tree

twinkly 300 L Light Tree

Download The Twinkly

| |

Download The Twinkly App And Follow The Setup Process In The App

Physical Setup

Insert the stake pole (A) into the ground. Using the provided measuring tape (B), form a triangle shape between the stake pole and two ground pegs (C) using the white indicators at the corners.
Screw all poles (D) together, then place the net of lights (E) on top.
Use the buttons along the lighted net to secure the two ends. Carefully position the central pole and net of lights on top of the stake pole.
Carefully position the central pole and net of lights on top of the stake pole. Carefully pull the net of lights down towards the ground and fix each loop to a ground peg.
Connect each light string to a port on the controller (F).
Connect the controller to the power adapter (G) and plug it into a power source.

Attention

Read and follow all safety instructions.

READ AND FOLLOW ALL SAFETY INSTRUCTIONS.
Do not mount or place near gas or electric heaters, fireplaces, candles, or other similar sources of heat.
The external flexible cable or cord of this luminaire cannot be replaced; if the cord is damaged, the luminaire shall be destroyed. The light source of this luminaire is not replaceable; when the light source reaches its end of life the whole luminaire shall be replaced.
This article is not suitable for room illumination and it is only for decoration purpose.
Do not secure the wiring of the product with staples or nails, or place on sharp hooks or nails.
Do not let lamps rest on the supply cord or on any wire.
Unplug the product when leaving the house, or when retiring for the night, or if left unattended.
This is an electric product — not a toy! To avoid the risk of fire, burns, personal injury, and electric shock it should not be played with or placed where small children can reach it.
Do not use this product for other than its intended use.
Do not hang ornaments or other objects from the cord, wire, or light string.
Do not cover the product with cloth, paper, or any material not part of the product when in use.
Do not close doors or windows on the product or extension cords as this may damage the wire insulation.
Read and follow all instructions that are on the product or provided with the product.
SAVE THESE INSTRUCTIONS.
Do not connect the chain to the supply while it is in the packing.
Where breakage or damage to lamps occurs the chain must not be used/energised but disposed of safely.
The lamps are not replaceable.
WARNING – RISK OF ELECTRIC SHOCK IF LAMPS ARE BROKEN OR MISSING. DO NOT USE.

Use and care instructions

a. Before using or reusing, inspect the product carefully. Discard any products that have cut, damaged, or frayed wire insulation or cords, cracks in the lamp holders or enclosures, loose connections, or exposed copper wire.
b. When storing the product, carefully remove the product from wherever it is placed, including trees, branches, or bushes, to avoid any undue strain or stress on the product conductors, connections, and wires.
c. When not in use, store neatly in a cool, dry location protected from sunlight.

WARNING – To reduce the risk of fire and electric shock:

a. Do not mount or support wires in a manner that can cut or damage wire insulation.
Class A Disclaimer: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/television technician for help.

Compatibility Disclaimer

Wireless performance is dependent on your device’s Bluetooth/WiFI wireless technology, please refer to your device’s manufacturer. Ledworks SRL will not be liable for any lost of data or leakages resulting from the use of these devices.Consult the dealer or an experienced radio/ television technician for help.

WARNING

Do not connect the light string to the power supply while it is in the packaging. The connecting cable cannot be repaired or replaced. THE LAMPS ARE NOT REPLACEABLE. The lighting chain must not be used without all gaskets being in place. Lighting chains don’t intend for interconnection. Do not connect this light string electrically to devices from another manufacturer.

CAUTION! Strangulation hazard. Keep out of reach of young children.

The crossed-out wheeled bin symbol indicates that the item should be disposed of separately from household waste. The item should be handed in for recycling in accordance with local environmental regulations for waste disposal.

The manufacturer, Ledworks Srl, declares that this device complies with the (LVD) 2014/35/EU, (RED) 2014/53/EU, (EMC) 2014/30/EU, (RoHS) 2011/65/EU, (REACH) 1907/2006 directives. The full text of the EU declaration of conformity is available at the following Internet address: www.twinkly.com/certifications

System Requirement

The minimum system requirement for mobile phones are iOS 11 and Android 5 Check the app store for the
latest update to ensure the best performance.

Technical Specifications

Power supply: see label IP protection: IP44

Premium grade LED diodes

To ensure high color rendering, Twinkly products only use high-quality LEDs.
Twinkly’s RGB and RGB+W products are produced according to quality principles and processes that allow us to obtain a high degree of primary color purity.
The minimum excitation purity values of the Blue, Green and Red components are shown within the table below.

Bluetooth Licensing

The Bluetooth Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Ledworks SRL is under license. Other trademakrs and trade names are those of their respective owners.

Operating RF for 802.11 b/g/n Wi-Fi / Bluetooth V4.2 BR/EDR/LE

Frequency 2402/2480 Mhz
Max output Power <100mW

Color Purity values

Blue > 90%
Green > 65%
Red > 95%

values apply only to RGB (STP) and RGBW (SPP) products, not AWW (GOP) products

Controller

A BUTTON
B LED INDICATOR
CONTINUOUS GREEN: Direct Wi-Fi mode, connected
FLASHING GREEN: Direct Wi-Fi mode, no device connected
CONTINUOUS BLUE: Home Wi-Fi network mode, connected
FLASHING BLUE: Home Wi-Fi network mode, connection in progress
FLASHING RED: Home Wi-Fi network mode, unable to connect
LIGHT BLUE: SETUP MODE (Bluetooth ON)
YELLOW: Firmware Update in progress
CONTINUOUS RED: General error
FLASHING WHITE: Reset procedure in progress

A. Home Wifi Network Connection

CONNESSIONE RETE WI-FI DOMESTICA

Home Wifi Network Connection

B. Direct Wi-fi Connection

CONNESSIONE WI-FI DIRETTA

Direct Wi-fi Connection

Wi-Fi connection is required for operation. You can use: Direct Wi-Fi connection: Select “Twinkly_xxxxxx” WiFi from the list of available networks. Password: Twinkly2019 (NOTE: the internet on your phone will not be available in this case)

Reset Twinkly

Unplug Twinkly from the power socket. Press and hold the controller button.
While holding the button, plug in Twinkly.
Keep holding the button until all LEDs turn red (or amber for Gold Edition), then release the button.

Mapping

Map the layout of your decoration to unlock the full potential of your Twinkly lights, such as advanced effects, drawing, and many upcoming features.
Mapping
Mapping
Mapping