TWD400STP-TEU Twinkly Dots Light Cord Instructions
- June 4, 2024
- Twinkly
Table of Contents
GENERATION II dots
instructions guide
for indoor and outdoor use
Attention
Read and follow all safety instructions.
- READ AND FOLLOW ALL SAFETY INSTRUCTIONS.
- Do not use seasonal products outdoors unless marked suitable for indoor and outdoor use. When products are used in outdoor applications, connect the product to a Ground Fault Circuit Interrupting (GFCI) outlet. If one is not provided, contact a qualified electrician for proper installation.
- This seasonal use product is not intended for permanent installation or use.
- Do not mount or place near gas or electric heaters, fireplaces, candles, or other similar sources of heat.
- Do not secure the wiring of the product with staples or nails, or place on sharp hooks or nails.
- Do not let lamps rest on the supply cord or on any wire.
- Unplug the product when leaving the house, or when retiring for the night, or if left unattended.
- This is an electric product — not a toy! To avoid the risk of fire, burns, personal injury, and electric shock it should not be played with or placed where small children can reach it.
- Do not use this product for other than its intended use.
- Do not hang ornaments or other objects from the cord, wire, or light string.
- Do not cover the product with cloth, paper, or any material not part of the product when in use.
- Do not close doors or windows on the product or extension cords as this may damage the wire insulation.
- Read and follow all instructions that are on the product or provided with the product.
- SAVE THESE INSTRUCTIONS.
- Do not connect the chain to the supply while it is in the packing.
- Where breakage or damage to lamps occurs the chain must not be used/energized but disposed of safely.
- The lamps are not replaceable.
- WARNING – RISK OF ELECTRIC SHOCK IF LAMPS ARE BROKEN OR MISSING. DO NOT USE.
Use and care instructions
a. When the product is placed on a live tree, the tree should be well
maintained and fresh. Do not place on live trees in which the needles are
brown or break off easily. Keep the live tree holder filled with water.
b. If the product is placed on a tree, the tree should be well-secured and
stable.
c. Before using or reusing, inspect the product carefully. Discard any
products that have cut, damaged, or frayed wire insulation or cords, cracks in
the lamp holders or enclosures, loose connections, or exposed copper wire.
d. When storing the product, carefully remove the product from wherever it is
placed, including trees, branches, or bushes, to avoid any undue strain or
stress on the product conductors, connections, and wires.
e. When not in use, store neatly in a cool, dry location protected from
sunlight.
WARNING – To reduce the risk of fire and electric shock:
a. Do not install on trees needles, leaves, or branch coverings of metal or
materials which look like metal.
b. Do not mount or support wires in a manner that can cut or damage wire
insulation.
Class A Disclaimer: This equipment has been tested and found to comply
with the limits for a Class A digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/television technician for help.
WARNING!
Do not connect the light string to the power supply while it is in the
packaging. The connecting cable cannot be repaired or replaced. THE LAMPS ARE
NOT REPLACEABLE. The lighting chain must not be used without all gaskets being
in place. Lighting chains don’t intend for interconnection. Do not connect
this light string electrically to devices from another manufacturer. CAUTION!
Strangulation hazard. Keep out of reach of young children.
The crossed-out wheeled bin symbol indicates that the item should be disposed
of separately from household waste. The item should be handed in for recycling
in accordance with local environmental regulations for waste disposal.
The manufacturer, Leadworks Srl, declares that this device complies with the
(LVD) 2014/35/EU, (RED) 2014/53/EU, (EMC) 2014/30/EU, (RoHS) 2011/65/EU,
(REACH) 1907/2006 directives. The full text of the EU declaration of
conformity is available at the following Internet address:
www.twinkly.com/certifications
System Requirement
The minimum system requirement for mobile phones are iOS 11 and Android 5
Check the app store for the latest update to ensure the best performance.
Technical Specifications
Power supply: see label
IP protection: IP44
Premium grade LED diodes
To ensure high color rendering, Twinkly products only use high-quality LEDs.
Twinkly’s RGB and RGB+W products are produced according to quality principles
and processes
that allow us to obtain a high degree of primary color purity.
The minimum excitation purity values of the Blue, Green and Red components are
shown in the table below.
| Operating RF for Wi-Fi / Bluetooth | Color Purity values |
|---|
Frequency
Max output
Power| 2402/2480 Mhz
<100mW| Blue
Green
Red| > 90%
65%
95%
- values apply only to RGB (STP) and RGBW (SPP) products, not AWW (GOP) products
physical set-up
- Decorate your interiors or spaces with Twinkly Dots
- Connect the Twinkly Dots to the power adapter.
- Plug the power adapter into a power socket, and the lights will switch on.
controller
- CONTINUOUS GREEN: Direct Wi-Fi mode, connected
- FLASHING GREEN: Direct Wi-Fi mode, no device connected
- CONTINUOUS BLUE: Home Wi-Fi network mode, connected
- FLASHING BLUE: Home Wi-Fi network mode, connection in progress
- FLASHING RED: Home Wi-Fi network mode, unable to connect
- LIGHT BLUE: SETUP MODE (Bluetooth ON)
- YELLOW: Firmware Update in progress
- CONTINUOUS RED: General error
- FLASHING WHITE: Reset procedure in progress
downloading the app
Go to App Store/Google Play Store (or scan QR code). Download and install
the Twinkly app
Note: All app illustrations in this document are a mere representation of
the functionality and might vary from the actual app visuals.
Setup twinkly
- Launch the Twinkly app.
- Sign up/log in to your account (necessary for using smart home features).
- Follow the setup process on the app.
connection modes
Twinkly uses Bluetooth for the setup process only. Wi-Fi connection is
required for operation. You can use:
A. Home Wi-Fi network connection (recommended): Connect with your home/office
WiFi from the list of available networks.
B. Direct Wi-Fi connection: Select “Twinkly_xxxxxx” WiFi from the list of
available networks. Password: Twinkly2019
(NOTE: the internet on your phone will not be available in this case)
mapping
Map the layout of your decoration to unlock the full potential of your Twinkly lights, such as advanced effects, drawing, and many upcoming features.
mapping tips
Note: For best results, avoid reflective surfaces behind the tree, keep the mobile cam steady during the process, and ensure moderate ambient light (not too dark).
Troubleshooting
Q THE LIGHTS DO NOT SWITCH ON****
– Check that the power adapter is plugged in and that the controller is
correctly connected to the device
– Check that the LED status indicator on the controller is lit
– Briefly press the button on the controller
– If this doesn’t work, unplug the power adapter, wait 30 seconds, and plug in
again
Q THE LIGHTS TURNED ON BUT ARE BLOCKED****
– Briefly press the button on the controller
– If this does not work, unplug the power adapter, wait for 30 seconds, and
plug it in again
Q THE LED INDICATOR IS LIGHT BLUE, BUT MY SMARTPHONE CAN NOT FIND WEEKLY****
– Unplug the power adapter, wait 30 seconds, plug it in again, and repeat the
Configuration procedure
– If this does not work, try to Reset (see Reset procedure below)
– If this won’t work, see the online reference manual
help.twinkly.com
Q HOW CAN I CONNECT TWINKLY WITHOUT A HOME WI-FI NETWORK?****
– Open Wi-Fi settings on your smartphone
– Find and select “Twinkly_XXXXXX” network
– Enter the Wi-Fi password “ Twinkly2019 ” and ensure that the
“Twinkly_XXXXXX” network is connected
Q TWINKLY SETUP WAS SUCCESSFUL, BUT THE LIGHTS DON’T RESPOND TO COMMANDS****
– Within the Twinkly application, open “Devices” and check that the Twinkly
device is selected
– If this does not work, stop the Twinkly application and launch it again
– If this does not work, try to Reset (see Reset procedure below)
– If this does not work, delete the Twinkly application from your smartphone,
then download the latest version from AppStore or Google Play Store
– If you have any problems, please write to
support@twinkly.com
Reset twinkly
- Unplug Twinkly from the power socket. Press and hold the controller button.
- While holding the button, plug in Twinkly.
- Keep holding the button until all LEDs turn red (or amber for Gold Edition), then release the button.
Online manual
| Browse, play and edit effects.
---|---
Create new effects.
Group multiple devices together.
Synchronize with music.
Download new effects.
Control with Smart Home Assistant.
http://twinkly.com/manual
For all these features and more, see
help.twinkly.com
RGB TWD200STP-BEU| TWD200STP-BUK| TWD200STP-BUS| TWD200STP-BAU|
TWD200STP-TEU
---|---|---|---|---
TWD200STP-TUK| TWD200STP-TUS| TWD200STP-TAU| TWD400STP-BEU| TWD400STP-BUK
TWD400STP-BUS| TWD400STP-BAU| TWD400STP-TEU| TWD400STP-TUK| TWD400STP-TUS
TWD400STP-TAU| | |
LEDWORKS Srl
Via Tortona, 37 – 20144
Milano – Italy
more info
help.twinkly.com
References
- Twinkly Help Center
- Twinkly - Innovative Smart LED Lighting Solutions for Home and Busines
- Twinkly - Innovative Smart LED Lighting Solutions for Home and Busines
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>