Twinkly GENERATION II icicle 190 LEDs Special Edition User Guide
- June 4, 2024
- Twinkly
Table of Contents
Twinkly GENERATION II icicle 190 LEDs Special Edition
IMPORTANT INSTRUCTION
Read and follow all safety instructions.
- READ AND FOLLOW ALL SAFETY INSTRUCTIONS.
- Do not use seasonal products outdoors unless marked suitable for indoor and outdoor use. When products are used in outdoor applications, connect the product to a Ground Fault Circuit
- Interrupting (GFCI) outlet. If one is not provided, contact a qualified electrician for proper installation.
- This seasonal use product is not intended for permanent installation or use.
- Do not mount or place near gas or electric heaters, fireplaces, candles, or other similar sources of heat.
- Do not secure the wiring of the product with staples or nails, or place on sharp hooks or nails.
- Do not let lamps rest on the supply cord or on any wire.
- Unplug the product when leaving the house, or when retiring for the night, or if left unattended.
- This is an electric product — not a toy! To avoid the risk of fire, burns, personal injury, and electric shock it should not be played with or placed where small children can reach it.
- Do not use this product for other than its intended use.
- Do not hang ornaments or other objects from the cord, wire, or light string.
- Do not cover the product with cloth, paper, or any material not part of the product when in use.
- Do not close doors or windows on the product or extension cords as this may damage the wire insulation.
- Read and follow all instructions that are on the product or provided with the product.
- SAVE THESE INSTRUCTIONS.
- Do not connect the chain to the supply while it is in the packing.
- Where breakage or damage to lamps occurs the chain must not be used/energized but disposed of safely.
- The lamps are not replaceable.
- WARNING – RISK OF ELECTRIC SHOCK IF LAMPS ARE BROKEN OR MISSING. DO NOT USE
Use and care instructions
-
When the product is placed on a live tree, the tree should be well maintained and fresh. Do not place on live trees in which the needles are brown or break off easily. Keep the live tree holder filled with water.
-
If the product is placed on a tree, the tree should be well-secured and stable.
-
Before using or reusing, inspect the product carefully. Discard any products that have cut, damaged, or frayed wire insulation or cords, cracks in the lamp holders or enclosures, loose connections, or exposed copper wire.
-
When storing the product, carefully remove the product from wherever it is placed, including trees, branches, or bushes, to avoid any undue strain or stress on the product conductors, connections, and wires.
-
When not in use, store neatly in a cool, dry location protected from sunlight.
WARNING
To reduce the risk of fire and electric shock:
- Do not install on trees having needles, leaves or branch coverings of metal or materials which look like metal.
- Do not mount or support wires in a manner that can cut or damage wire insulation. Class A
Disclaimer
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
WARNING!
- Do not connect the light string to the power supply while it is in the packaging.
- The connecting cable cannot be repaired or replaced. THE LAMPS ARE NOT REPLACEABLE.
- The lighting chain must not be used without all gaskets being in place. Lighting chains don’t intend for interconnection.
- Do not connect this light string electrically to devices from another manufacturer. CAUTION! Strangulation hazard. Keep out of reach of young children.
- The crossed-out wheeled bin symbol indicates that the item should be disposed of separately from household waste.
- The item should be handed in for recycling in accordance with local environmental regulations for waste disposal.
- The manufacturer, Leadworks Srl, declares that this device complies with the (LVD) 2014/35/ EU, (RED) 2014/53/EU, (EMC) 2014/30/EU, (RoHS) 2011/65/EU, (REACH) 1907/2006 directives.
- The full text of the EU declaration of conformity is available at the following Internet address: www.twinkly.com/certifications
System Requirement
The minimum system requirement for mobile phones are iOS 11 and Android 5
Check the app store for the latest update to ensure the best performance.
Technical Specifications
- Power supply: see label
- IP protection: IP44
Premium grade LED diodes
To ensure high color rendering, Twinkly products only use high-quality LEDs. Twinkly’s RGB and RGB+W products are produced according to quality principles and processes that allow us to obtain a high degree of primary color purity. The minimum excitation purity values of the Blue, Green and Red components are shown within the table below.
Operating RF for Wi-Fi/ Bluetooth
- Frequency Max output 2402/2480 Mhz
- Power <100mW
Color Purity values
- Blue 90%
- Green 65%
- Red 95%
FCC RULES
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/television technician for help.
References
- Twinkly Help Center
- Twinkly - Innovative Smart LED Lighting Solutions for Home and Busines
- Twinkly - Innovative Smart LED Lighting Solutions for Home and Busines