twinkly Connection Hub 8 Ports User Guide
- June 4, 2024
- Twinkly
Table of Contents
twinkly Connection Hub 8 Ports
SAFETY INSTRUCTIONS
1. Read and follow all safety instructions.
2. Do not mount or place near gas or electric heaters, fireplaces, candles,
or other similar sources of heat.
3. Do not secure the wiring of the product with staples or nails, or place on
sharp hooks or nails.
4. This is an electric product – not a toy! To avoid risk of fire, burns,
personal injury and electric shock it should not be played with or placed
where small children can reach it.
5. Do not use this product for other than its intended use.
6. Do not hang ornaments or other objects from cord, wire, or light string.
7. Do not cover the product with cloth, paper, or any material not part of
the product when in use.
8. Do not close doors or windows on the product or extension cords as this
may damage the wire insulation.
9. Read and follow all instructions that are on the product or provided with
the product.
10. Save these instructions.
USE AND CARE INSTRUCTIONS
- a. When the product is placed on a live tree, the tree should be well maintained and fresh. Do not place on live trees in which the needles are brown or break off easily. Keep the live tree holder filled with water.
- b. Once the product is placed, the installation should be well secured and stable.
- c. Before using or reusing, inspect the product carefully. Discard any products that have cut damaged, or frayed wire insulation or cords, cracks in the lampholders or enclosures, loose connections, or exposed copper wire.
- d. When storing the product, carefully remove the product from wherever it is placed, including trees, branches, or bushes, to avoid any undue strain or stress on the product conductors, connections, and wires.
- e. When not in use, store neatly in a cool, dry location protected from sunlight. ATTENTION – TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK
- a. Do not install on surfaces having sharp edges, or coverings of metal or materials which look like metal.
- b. Do not mount or support wires in a manner that can cut or damage wire insulation.
Class A Disclaimer: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/television technician for help.
WARNING!
The connecting cable cannot be repaired or replaced. CAUTION! Strangulation
hazard. Keep out of reach of young children. The crossed-out wheeled bin
symbol indicates that the item should be disposed of separately from household
waste. The item should be handed in for recycling in accordance with local
environmental regulations for waste disposal.
TECHNICAL SPECIFICATIONS
| No. of ports | 8 |
|---|---|
| IP rating | IP65 |
| Connectivity | Ethernet |
| Power rating | 3 W MAX |
| Passive PoE IN | 24V MAX |
| Passive PoE OUT | 24V MAX |
| Temperature range | -15°C / 40°C |
| Storage temperature range | -20°C / 60°C |
| Warranty | 12 months |
Setup requirements
- Twinkly PRO Connection Hub
- ETH Cable Extender
- Twinkly PRO 4G Router [1]
- Internet Router [1]
- Twinkly PRO Power Line Controller [1]
Hardware overview
- POE IN
- POE OUT
- ETHERNET CABLES
Installation process
USING YOUR INTERNET ROUTER
Note : ensure you have completed the installation process from Twinkly PRO Power Line Controller’s quickguide before continuing.
- Connect a Twinkly PRO Power Line Controller to the port indicated with PoE IN
- Connect the Twinkly PRO 4G Router to the port indicated with PoE OUT
Enabling the PoE
- Power up the Power Line Controller connected to the PoE IN port, then press and hold the button on the case until the status LED makes a short red pulse.
- Once the PoE is turned on for the first time, it will remain active even if you disconnect the controller.
- To turn off the PoE press and hold the button on the controller until the flashing red LED stops.
- Wait for connection to be established, refer to the network connection LED on the Power Line Controller to make a burst blink.
- In case you are using Twinkly PRO 4G Router, ensure you have successfully configured it prior to this step, refer to its quickguide for more info
NETWORK CONNECTION LED
STATUS LED
For more information, you can visit https://www.twinkly.com/support/ to get technical support and access the latest downloads and user manuals
- LEDWORKS SRL
- Via Tortona, 37 – 20144
- Milano
- Italy
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>