musiCozy GH05 Bluetooth Sleeping Masks with Headphones User Manual
- June 5, 2024
- musiCozy
Table of Contents
musiCozy GH05 Bluetooth Sleeping Masks with Headphones
Features
- Bluetooth name: musiCozy
- Version: 5.0
- External charging: DC5V/1A
- Charging port: MicroUSB
- Battery: 3.7V/150mah
- Battery type: Polymer lithium
- Charging time: 1-2 hours
- Continuous play time: >8 hours
Instructions
- Turn on/off: Press and hold the ON/OFF button . · for 1.5 seconds to turn it on, the blue light flashes quickly, and enter pairing mode. Press and hold the ON/OFF button for 3 seconds to turn off, and accompanied by a tone.
- Connect Bluetooth Devices : Turn on phone Bluetooth and find the name “musiCozy”, Select the device to complete the Bluetooth pairing. After the pairing was successful, the blue light flashes for 5 seconds. Bluetooth automatically disconnects from a long distance and returns to Bluetooth within 8 meters within 3 minutes. (The Bluetooth will automatic shutdown after 8 minutes if without any connection.)
- Play Music: Short press the ON/OFF button to switch pause/play. Short press”+” or”-” to adjust the volume. Long press “+” or”-” for the next or previous song.
- roduct Factory Configuration:
- 1*Bluetooth Sleep Mask
- 1 *Portable Carrying Bag
- 1 *Charging Cable
- 1 *User Instructions
How to disassemble and wash the sleep mask
Washing. Bluetooth module is not washable! Only wash the sleep mask after
removing the Bluetooth module, and please complete the wash within 10 minutes
as soon as possible. Then make it dry fully, it is recommended to dry it more
than 24 hours before using it again.
‘Note ‘Make sure that the dry ,t fully , otherwise the internal water vapor may result in the speaker become a smaller volume or become static
Customer service
We offer 24 hours all day friendly customer service, please sent email to us
if you need any technical support, and we will do full refund or sent a
replacement no matter any problems with this product.
FCC Information
This device complies with Part 15 of the FCC rules.
Operation is subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any interference
received; including interference that may cause undesired operation.
Federal Communications Commission (FCC) Statement
This Equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radionv technician for help.
Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user authority to operate the equipment. Tested to comply with FCC standard.
FOR HOME OR OFFICE USE
Warning
This equipment complies with FCC RF radiation exposure limits set forth for an
uncontrolled environment. This device and its antenna(s) must not be co-
located or conjunction with any other antenna or transmitter.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>