DT Research 554 Medical-Grade Graphics Station User Guide
- June 12, 2024
- DT Research
Table of Contents
DT Research 554 Medical-Grade Graphics Station
Product Information
The Graphics Station System is a medical-grade graphics station manufactured by DT Research, Inc. It integrates a high-brightness 23.8-inch display with a high-performance system and USB ports to satisfy the varying needs for comprehensive point-of-care applications. The system comes with a comprehensive set of I/O ports located at the bottom side of the unit.
Package Contents
- I/O Ports
Precautions
Before using the Graphics Station System, please review the following
precautions:
- Use the AC-DC adapter provided for power supply.
- Do not use the Power Button (hold 4+ seconds feature) to turn off the device unless it is necessary for recovery from device lockups.
Product Usage Instructions
Attach The Tabletop Stand (Optional)
- Insert the top two tabs of the tabletop stand into the top two open slots on the 554 back panel.
- Push the latch to pivot the two lower tabs of the tabletop stand.
- Push the two lower tabs into the two lower slots on the 554 back panel. Make sure the latch locks back into position so the stand is securely attached.
Detach the Tabletop Stand (Optional)
- Push the latch to pivot the two lower tabs.
- Pull out the two lower tabs, then the two upper tabs from the 554 back panel.
Powering ON and OFF
To power on the Graphics Station System, follow these steps:
- Connect the AC-DC adapter to the system.
- Push and quickly release the Power Button.
- The display will come on in a few seconds.
To put the system in Standby mode:
- Push and quickly release the Power Button.
To turn off the system for extended storage:
- Power off the device safely using any software function that shuts down the computer provided in the software operating system.
NOTE: To conserve power, use (push and quick release) the Power Button to put the device in Standby mode while not in use. Pushing briefly on the same button will wake up the system within seconds.
INTRODUCTION
Thank you for acquiring DT Research’s Graphics Station System. With a 23.8”
TFT-LCD display and powered by an Intel® Core™ i processor, the All-In-One
Computer 554 offers an optimal functionality combining excellent performance
and power-saving capability. The 554 equipped with powerful Graphics and
processing capabilities, and available with a choice of the Microsoft Windows
11 IoT Enterprise or Ubuntu operating systems. It is also fitted with
dedicated NVidia Graphics cards (RTX A2000, RTXA4000), and up to 64GB of RAM,
which make them ideal for handling complex medical imaging applications.
Please take a few moments to review the contents of this document to ensure
that the setup and startup proceed smoothly. The Graphics Station System is
ready for use, out of the box, in its default configuration when powered by
the power source provided. The following documentation offers guidance on the
hardware elements and features of the computer. Please refer to your device
provider for information pertaining to the software operating system or
software applications.
PACKAGE CONTENTS
- 554
- AC-DC power adapter with power cord
- Basic operation guide
I/O Ports
The Graphics Station System has a comprehensive set of I/O ports located at the bottom side of the unit.
- A. Power button
- B. Brightness +/-
- C. Display Port
- D. DC-In Jack
- E. USB 3.0
- F. Ethernet
- G. Microphone
- H. Potential Equalization Conductor(optional)
- I. Headphone
- J. COM
- K. USB Type-C
- L. USB 2.0
PRECAUTIONS
- Always exercise care when operating and handling the Graphics Station System.
- Never disassemble any portion of the enclosure, as this will void any product warranty on the Graphics Station System.
- Do not use any AC/DC adapter other than the one provided with the device or a replacement acquired from the manufacturer.
- In the unlikely event that smoke, abnormal noise or strange odor is present, immediately power down the Graphics Station System and disconnect all power sources. Please report the problem to your device provider immediately.
BASIC FEATURES
The Graphics Station System integrates a high-brightness 23.8” display with a high-performance system and USB ports to satisfy the varying needs for comprehensive point-of-care applications.
Attach The Tabletop Stand (Optional)
- Insert the top two tabs of the tabletop stand into the top two open slots on the 554 back panel.
- Push the latch to pivot the two lower tabs of the tabletop stand.
- Push the two lower tabs into the two lower slots on the 554 back panel. Make sure the latch locks back into position so the stand is securely attached.
Detach the Tabletop Stand (Optional)
- Push the latch to pivot the two lower tabs.
- Pull out the two lower tabs, then the two upper tabs from the 554 back panel.
Powering ON and OFF
Please use the AC-DC adapter with the Graphics Station System for the power
supply. To activate the Graphics Station System, push and quickly release the
Power Button and the display will come on in a few seconds. To put in Standby
mode, push and quickly release the Power Button. To turn off for extended
storage, power off the device safely using any software function that “shuts
down computer” provided in the software operating system.
NOTE:
To conserve power, use (push and quick release) the Power Button to put the
device in “Standby” mode while not in use. Pushing briefly on the same button
will wake up the system within seconds.
NOTE:
Avoid using the Power Button (“hold 4+ seconds” feature) to turn off the
device — this form of hardware shutdown is intended to be a means of recovery
from device lockups, and not as normal operation.
Wireless Networking
Wireless LAN
The Graphics Station System is often delivered with an embedded (user-
inaccessible) 802.11ac WLAN adapter equipped with a hidden custom antenna.
- Through the support of typical WLAN adapters, the Graphics Station System should be able to detect all 802.11 access points in the vicinity for you to select the access point of your choice for connection.
- The SSID and WEP/WPA/WPA2 (if enabled) parameters on the Graphics Station System and the access points have to match. The SSID is case-sensitive and it is recommended that you enable WEP/WPA/WPA2 encryption (or advanced alternatives) for secure access.
- When WEP/WPA/WPA2 is enabled, you may need to consult your network administrator or your networking equipment literature to properly configure associated settings such as Authentication mode, etc.
- Refer to the access point operating manuals for setting up the 802.11 access points.
Cleaning the Screen
- A screen cleaning solution that is alcohol-free and non-abrasive can be used to clean the touch screen.
- Cleaning with a micro-fiber cloth is recommended.
- Please spread the solution onto the cloth and then clean the touch screen.
Cleaning the Anti-microbial Enclosure
- Use a soft/non-abrasive cloth moistened with water to clean the enclosure.
- If using a cleaner, an alcohol-free and oxide-free cleaning liquid is recommended.
- To prevent scratching the anti-microbial coating, please wipe gently.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>