immax 07072-60 LED Dimmable Ceiling Lamp Instruction Manual

: June 12, 2024
: immax

Table of Contents

immax 07072-60 LED Dimmable Ceiling Lamp
FEATURED
Product Information
Product Usage Instructions
ASSEMBLY INSTRUCTIONS
Technical parameters
INSTALLATION
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

immax 07072-60 LED Dimmable Ceiling Lamp

FEATURED

Product Information

Protocol: Zigbee 3.0
Material: metal, plastic
Dimensions: 600 x 150 x 100mm
Light color: 3000K-6000K
Wattage: 34W
Luminous flux: 2450lm
Dimmable: yes
Illumination time: 50,000 hours
Power supply input voltage: AC 100-240V 50-60Hz
CRI(Ra):

Product Usage Instructions

Diffuser Installation: If your light includes a diffuser, be careful when installing or removing it. Excessive contact can cause damage to the surface finish of the luminaire or diffuser, which is not covered by the warranty.
Pairing with Remote Control: To pair the luminaire with the remote control, refer to the manual provided with the remote control. If pairing fails, reset both the remote control and the luminaire before attempting to pair them again.
Pairing Mode: The luminaire enters pairing mode for 30 seconds after it is switched on. Make sure to initiate the pairing process within this time frame.
Lamp Reset: Reset the luminaire only if it cannot be paired with a gate or remote control. Follow the appropriate steps to reset the device.

ASSEMBLY INSTRUCTIONS

a) Switch off the fuses before installing the luminaire.
b) A minimum of 2 people is required to safely install this product.
c) Electrical installation work may only be carried out by a qualified worker.
d) Unpack the luminaire from the packaging and lay the luminaire on a soft surface
e) If you have made sure that the electricity is safely switched off, you can start the installation of the luminaire itself. When mounting, follow the enclosed original pictorial instructions from the manufacturer.
f) Improper installation or manipulation of the luminaire will void the luminaire warranty

A. Only for the light with diffuser: Diffuser installation: When installing the diffuser or removing the plastic diffuser from the luminaire, please take extra care! Increased contact can damage the surface finish of the luminaire or diffuser. This mechanical damage is not covered by the warranty! Thank you for understanding

B. only for PENDANT LIGHT: Final adjustment to the height of the hanging chandelier: First, install the hanging chandelier on the ceiling, according to the instructions above. For the final adjustment of the height of the hanging chandelier, it is sufficient to adjust the length of the suspension cables. Shortening the cable length: release the lock and slowly slide the cables upwards towards the base of the hanging chandelier. The cable will then remain fixed in the position you have selected.

Extending the cable length: if you have installed the hanging chandelier cable too high, you must first release it by releasing the lock (located inside the luminaire base) at the upper end of the cable. This will allow the cable to be released and then adjusted to the position of your choice. You may then adjust all cables one by one. Thank you for understanding

C. Maintenance:
Construction doesn´t need any special maintenance. Use only wet or dry cloth to wipe the surface of the light unit.

D. PAIRING – to pair the luminaire with the remote control, see the manual in the remote control. If the luminaire cannot be paired with the remote control, reset both the remote control and the luminaire. Only then try pairing the luminaire with the remote control again.

E. PAIRING MODE – the luminaire is in pairing mode for 30 seconds after switching on

F. LAMP RESET – reset the luminaire only if the luminaire cannot be paired with a gate or remote c

LAMP RESET:

a) ON – 1s – OFF 2s
b) ON – 1s – OFF 2s
c) ON – 1s – OFF 2s
d) ON = 1s – OFF 2s
e) ON – the lamp flashes for 5 seconds
f) then confirm the reset – OFF 2 seconds – ON

HELP: point a) to d) ON-OFF in rhythm of the first letter of morse code ; ‘alpha’.

Technical parameters

Protocol: Zigbee 3.0
Material: metal, plastic
Dimensions: 600 x 150 x 100mm
Light color: 3000K-6000K
Wattage: 34W
Luminous flux : 2450lm
Dimmable: y es
Illumination time: 50,000 hours
Power supply input voltage: AC 100-240V 50-60Hz
CRI(Ra): <80
Compatibility: iOS, Android, Amazon Alexa, Apple Siri Shortcuts, Google Assistant, Philips HUE, TUYA, Tahoma, Lidl, Ikea.
Warranty period: 3 years

Immax NEO Smart remote v2 Zigbee 3.0

LIGHTING DEVICES CONTROL VIA APP

When initially power on the Lighting device:
- Lighting Device will start breathing smoothly in cold white color, and wait to be connected to Gateway via App (During this breathing time, Lighting device can NOT be paired directly to the remote).
- After been successfully connected to Gateway, Light will stay in steady cold white and brighter. Now user can use app to control the Light normall

LIGHTING DEVICES CONTROL VIA REMOTE
Connecting Process:

We provide 3 flexible methods for consumers to use Remote to control
Light(s). Below Method A and Method B is when user ALREADY add the Light into app. Method X is for those Light(s) which has NOT been added to App.

METHOD A (ONLINE PAIRING MODE)

Step 1: On the remote control, long press the “ON” and “OFF” buttons simultaneously for 5 seconds, the LED indicator of the remote control will start to flash slowly.
Step 2: In the Immax NEO PRO app, under the Home tab, click “+” to select the option to add a new product. Select the remote control from the list of devices. Then follow the instructions in the app.
Step 3: Then open the remote tab in the app and click on the icon on the top right – assign lights to the remote.
Step 4: Press “+” and “-” on the remote at the same time, the LED indicator will flash.

METHOD B (OFFLINE PAIRING MODE)
Put the remote VERY close to the bulb and long press “ON” button of the remote until Light breath for 3 times. Then the light will be removed in the gateway and link directly to the remote.

Note: Method B can only pair ONE Light at a time, and can maximumly connect and control 30 lights.

Method X (No App connected):
Before you try Method X, please make sure the Light NOT in continuously breathing status.
We can always use Remote to connect to Light by long pressing “ON”button until it breath for 3 times.

CONTROL PROCESS
Please see below snapshot of 4 simple functions that our remote
now supported after you connected the Light to the Remote.
DISCONNECT PROCESS

If user previously used Method A and already added both Remote and Lights to the App, then user can directly edit to delete the light in the Remote page.
If user previously used Method B or Method X for connecting, Then he need to put the Remote very close to the Light and long press “OFF”button until Light breath smoothly for 3 times, which proves disconnecting completed.

DOWNLOAD THE IMMAX NEO PRO APPLICATION