Jupio BVM0255 ProLine V-Mount Hotswap Adapter Plate for 2x V-Mount User Manual
- June 6, 2024
- Jupio
Table of Contents
Jupio BVM0255 ProLine V-Mount Hotswap Adapter Plate for 2x V-Mount
Thank you for purchasing this Jupio ProLine VJupio ProLine V-Mount Hotswap
-Mount Hotswap AdapterAdapter
Plate. To ensure your safety, please read this manual carefully before, please
read this manual carefully before using and keep it for future reference.
using and keep it for future reference.
For use as a battery charger for use as a battery charger
Install 1 or 2 batteries onto the VInstall 1 or 2 batteries onto the V-mount
Hotswap -mount Hotswap Adapter Plate. BothAdapter Plate. Both the Vthe V-mount
-mount terminal and the bidirectional D-tap can charge the batteries. terminal
and the bidirectional D-tap can charge the batteries. When charging, the LED
indicator for the remaining capacity of when charging, the LED indicator for
the remaining capacity of the respective battery lights up with one LED light
for 25% capacity respective battery lights up with one LED light for 25%
capacity, two LED, two LED lights for 50% capacity lights for 50% capacity,
three LED lights for 75% capacity and four LED, three LED lights for 75%
capacity and four LED lights for 100% capacity or in other words a fully
charged battery lights for 100% capacity or in other words a fully charged
battery..
This V-mount Hotswap -mount Hotswap Adapter Plate alternately charges two
installed adapter Plate alternately charges two installed batteries.
batteries. After the two batteries are fully charged, the corresponding
LEDAfter the two batteries are fully charged, the corresponding LED lights
will remain on for a long time.lights will remain on for a long time.
For use as a power supply for use as a power supply
VV–mount Hotswap mount Hotswap Adapter Plate can be installed on VAdapter
Plate can be installed on a V-mount device for-mount device for use as a power
supply. During the discharge process, the LED indicator. During the discharge
process, the LED indicator light of the adapter plate shows the power in real-
time. When the battery light of the adapter plate shows the power in real-
time. When the battery power is too low or if a battery is removed during the
discharge process, power is too low or if a battery is removed during the
discharge process, the Vthe V-mount Hotswap -mount Hotswap Adapter Plate will
automatically switch to another battery for power supply battery for power
supply. During the switching process, the electrical. During the switching
process, the electrical device or instrument will not switch of device or
instrument will not switch off and can therefore be used normally and can
therefore be used normally.. Install two fully charged batteries in the
VInstall two fully charged batteries in the V-mount Hotswap -mount Hotswap
Adapter PlateAdapter Plate and then connect it to the Vand then connect it to
the V-Mount device.-Mount device.
If one battery is fully charged and one battery is not fully charged, theIf
one battery is fully charged and one battery is not fully charged, the lower
capacity battery will be discharged first.the lower capacity battery will be
discharged first.
Using this VUsing this V-mount Hotswap -mount Hotswap Adapter Plate on a
VAdapter Plate on a V-mount camera is the the-mount camera is the same as
using a BP-V series battery (BP-V47 / BP-V95 / BP-V142 /same as using a BP-V
series battery (BP-V47 / BP-V95 / BP-V142 /
BP-V190 / BP-V200 ). BP-V190 / BP-V200 ). The battery power information can be
viewed on theThe battery power information can be viewed on the camera itself.
camera itself.
Press the power test button to check the real-time capacity of the press the
power test button to check the real-time capacity of the respective battery’s
respective battery. If the battery power is too low. If the battery power is
too low, the LED indicator will not, the LED indicator will not light up.
light up.
Caution:
- If VIf the V-mount Battery Swap -mount Battery Swap Adapter Plate is not to be used for an extended period of time, unplug the power cord and remove the battery extended period of time, unplug the power cord and remove the battery..
- Keep the VKeep the V-mount Battery Swap -mount Battery Swap Adapter Plate in a dry and well-Adapter Plate in a dry and well-ventilated environment. ventilated environment.
- After installing a battery on the VAfter installing a battery on the V-mount Battery Swap -mount Battery Swap Adapter Plate, Adapter Plate, please check if the battery lock lever is fully rebounded and that please check if the battery lock lever is fully rebounded and that the battery is secure, to prevent it from falling of battery is secure, to prevent it from falling off.
Over view
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>