PROCHEM E827 Olefin Pre Clean Instructions

: June 4, 2024
: PROCHEM

Table of Contents

PROCHEM E827 Olefin Pre Clean
Removes oily soils and breaks the static soil bonds on heavily soiled
FEATURES
USE DILUTION
USE INSTRUCTIONS
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

PROCHEM-loog

PROCHEM E827 Olefin Pre Clean

Removes oily soils and breaks the static soil bonds on heavily soiled

olefin

APPLICATION: Pre-spray
DESCRIPTION: Pre-conditioning cleaner for olefin carpet. Ideal for olefin fiber carpets usually found in offices, clinics, health care facilities, institutions and in many commercial buildings. Its high-grade detergents, solvents and amphoteric surfactants loosen soils adhering to fibers with a static bond. Removes sticky soils and greases that can cause yellowing and fiber discoloration. Olefin Pre-Clean can also be used on soot damaged synthetic carpets, synthetic upholstery, and filtration soil issues.

FEATURES

Powerful pre-conditioner for olefin (polypropylene) carpets
Deep-cleans oil and soil buildup, removes discoloration
Removes filtration soil at carpet edges
Not for use on stain-resistant carpets
WHERE TO USE: For professional use as a pre-spray for olefin (polypropylene) and commercial carpeting, using hot water extraction.

USE DILUTION

Pump Sprayer: 4 oz. per gallon
Injection Sprayer (High Pressure 1:9 type): 1½ to 2 qts. in 5-qt. injection sprayer

USE INSTRUCTIONS

Pretest in an inconspicuous location. For use on olefin (polypropylene) carpets. Use only as a pre-conditioner, rinse well.

Pump Sprayer: Mix 4 oz./gal. (1:32 dilution). Pre-spray, allow 5 to 15 minutes dwell time, do not allow to dry. Rinse-extract thoroughly with All Fiber Deep Clean (S103) solution to remove oils, soil and detergent residues.
Injection Sprayer (High Pressure 1:9 type): Add 1½ quarts (48 oz) for normal soil, 2 quarts (64 oz) for heavy soil, to the 5-qt. injection sprayer container, fill with water.
Pre-spray and rinse-extract.
COVERAGE: Makes up to 33 gallons of ready-to-use pre-spray. One ready-to- use gallon cleans approximately 400 square feet. Coverage will vary depending on soil level and thickness and absorbency of carpet.
USAGE TIPS: Use for, similar to, substitute for, where to use/not use

Use Prochem All Fiber Deep Clean (S103) to rinse-extract for powerful two-step cleaning on olefin and commercial carpets. Rinsing with All Fiber Deep Clean reduces browning and wicking that are often a problem on olefin carpets.
Add ½ to 1 oz of Chemspec Energizer oxygen bleach cleaning booster to a ready-to-use gallon of Olefin Pre-Clean to brighten dulled colors, lighten discoloration, and help reduce odors. Pre-test for colorfastness. On solution-dyed carpet only, up to 3 oz Energizer may be added per gallon with caution only on olefin to help solve severe discoloration problems. Rinse well.
Use to remove copier or printer toner spills: First dry vacuum up as much of the spilled toner as possible using an attachment or vacuum without a beater bar. Pre-spray with Olefin Pre-Clean at 4 oz. per gallon. Extract and repeat until removal is complete. The amphoteric surfactants help break the static bond between toner and fibers.

ADDITIONAL REFERENCES available at LegendBrandsCleaning.com

Olefin Pre-Spray Technical Data

Cleaning system guides
Product User Guides
Safety Data Sheets
Product labels
Tech Tips blog

Boost your skills and knowledge with Legend Brands 103947 (8.695-100.0 – E827-5): One 5 gal. / 18.9 L pail Education! Taught by leading experts in the cleaning and
restoration industry, Legend Brands Education courses enhance
your knowledge of cleaning and restoration processes and improve your skills and boost your profitability. Courses are hosted online, at distributor locations, and at in hands-on training facilities. For current offerings, visit LegendBrandsEducation.com or call 800-932-3030.
Sales/Technical Support: 800-932-3030 • Emergency Hazards Hotline (INFOTRAC): N. Amer. 800-838-5053 / Intl. 352-323-3500