SUZUKI MST-01 Melodion Stand Owner’s Manual
- June 12, 2024
- Suzuki
Table of Contents
Melodion Stand MST-01 – Owner’s manual
Thank you for choosing the SUZUKI MST-01 Melodion Stand. For your safety and long term use of MST-01, please read and keep this instruction manual.
CAUTION
Protect any cord or strap, and the string of spit valve’s plug on the PRO-37v3 etc., from being caught up on the MST-01 and damage the stand or Melodion.
Do not attempt to convert or disassemble this accessory except where indicated in the manual.
Clean the stand with a dry soft cloth. Do not use alcohol, thinner’s or petro- chemical-based polishes.
Physical shocks caused by dropping, bumping or placing objects which are heavier than a Melodion on the stand can result in damage.
-
Specification
Dimension 52 x 31.5 x 40-50 cm (20.47″ x 12.40″ x 15.75″-19.68″)
Weight 660 g (1.45 lb) -
Suitable Melodion models
All the models 32keys and over
This product is not available on W-37 Melodion. -
Names of parts
-
Upper arm
-
Lower arm
-
Folding foot
(This is folded at the factory before delivery) -
Butterfly nut
(This nut is attached to the back side of lower arm)
- How to assemble
- Open the foot widely and place it on a flat surface.
- Unscrew the butterfly nut only (do not remove the hexagonal nut). Insert the joint screw of the lower arm to the foot and tighten with the butterfly screw.
- Loosen the knob at the back side of foot and insert the upper arm. Adjust the height for the Melodion and fix with the knob.
A: knob
1.: Completion drawing
Example of use: with PRO-44H (HAMMOND 44)
Do not place any Melodion on this stand except the specified models.
SUZUKI MUSICAL INST. MFG. CO.,LTD.
2-25-7 Ryoke, Naka-ku, Hamamatsu, 430-0852 Japan suzukimusic-global.com