ANTOP AP-D1-GS202 Intelligent Air Purifier Instruction Manual

June 12, 2024
ANTOP

ANTOP AP-D1-GS202 Intelligent Air Purifier

Product Information

This product is an indoor air purifier, with the following functions:

  • Smoke removal
  • Dust removal
  • Deodorization
  • Formaldehyde removal
  • Sterilization

Product Installation
To install the product:

  1. Place it in the right location. Ensure that the air inlet maintains a certain distance from walls and other shielding objects. Refer to the picture below for details.
  2. Connect the power supply by plugging the power cable into the power port at the bottom of the air purifier.

Product Operation
Display and Operation Instructions
The product features the following:

  • Air outlet
  • Air inlet
  • Front side
  • Nano-photocatalyst Active manganese HEPA H13 Filter
  • Brightness control: High light/Low light/Turn off display
  • Timing: 1h/2h/4h/6h
  • *Keep a certain distance between the back sensor and the wall.
  • *Close doors and windows for better purification.
  • Wifi button
  • Fan speed
  • Switch
  • Air quality: The fewer bars, the worse the air quality
  • When the buttons are blinking, that function is turned off. If the buttons are on for a long time, that function is turned on.
  • Life time of HEPA filter: Life time 100%, Life time 60%, Life time 30%, Life time 5% (Please replace the filter in time and press for 5 seconds to reset the filter)
  • Data display: Air quality/Fan speed/Operation mode/Timing
  • Children lock: Press for 2 seconds to display the PM2.5 concentrations
  • Operation mode: Sleep mode (Lowest fan speed. Screen and ambient lights off), Automatic mode (Adjust fan speed according to air quality), High speed (Maximum wind speed operation)
  • Fan speed adjustment: Low/Middle/High
  • Purification principle:
    • HO
    • CO
    • CO
    • CO CO
    • CO HO
    • HCHO
    • HCHO HCHO
    • HCHO HCHO HCHO
    • HCHO HCHO HCHO HCHO
    • Activated manganese filter

WIFI Using Instruction
To connect the product to your phone via WiFi:

  1. Download the Smart Life or Smart Graffiti app from the App Store and install it on your phone.
  2. Turn on WiFi and Bluetooth on your phone.
  3. Open the app and press the + button on the top right side of the page to add a new device.
  4. Enter the WiFi password that your phone is connected to.
  5. Turn on the machine and long press the WiFi button for 2 seconds.
  6. If the previous steps were completed correctly, a connecting window will appear on your phone. Press “Yes” to connect the machine to WiFi.

If your phone cannot connect to the machine, long press the WiFi button for 2 seconds. After the beep sound, the machine has successfully connected to WiFi.

Maintenance
To change the filter:

  1. Make sure to turn off and unplug the purifier before performing any operations.
  2. Rotate the bottom cover counterclockwise as indicated by the bottom cover switch and take out the filter.
  3. Rotate counterclockwise to open and take out the nano-photocatalytic filter, and replace it with the HEPA H13 filter. Then, install the nano-photocatalytic filter according to the original operation mode.
  4. Install the filter back and close the bottom cover following the original operating path. Now the replacement is complete.

Product information
This product is an indoor air purifier, with the functions of smoke removal, dust removal, deodorization, formaldehyde removal and sterilization.

ANTOP-AP-D1-GS202-Intelligent-AirPurifier-fig \(4\)

Product installation

Put on the right place
When using, the air inlet should keep a certain distance from walls and other shielding objects. (refer to the picture below for details)

Keep a certain distance between the back sensor and the wall.

Connect the power supply
Connect the power cable to the power port at the bottom of the air purifier.

Close doors and Windows for better purification

Product Operation

Display and operation instructions

ANTOP-AP-D1-GS202-Intelligent-AirPurifier-fig \(7\)

When the buttons are blinking, that function is turned off. If the buttons are on for long time, that function is turned on.

Purification principle

Purification and sterilization:
Puurriification : HEPA filter stops PM2.5 in the air. The formaldehyde is chemically decomposed by activated manganese filter, and finally water and carbon dioxide are generated.

Principle:

HCHO + O2 = CO2 + H2O

Sterilization:
Light reacts with nano-photocatalytic materials in the filter to sterilize bacteria and decompose odors and harmful gases (TVOC) in the air.

WIFI Using Instruction

Download the APP
Search “Smart life” or “Smart Graffiti” in APP store, download and install it to your phone. If the installment is done, you can log in directly.

Smart life

Smart Graffiti

APP linking to Machine

  1. Phone: Turn on wifi  and bluetooth
  2. Phone: Open the APP, and press”+”button on the right top side of the page to add new device Key in the wifi password that your phone is connecting to.
  3.   Machine: Turn on the machine,long press the “wifi” button for 2 seconds.
  4. Phone: There will be a connecting window coming out if the fo rmer steps were finished correctly. Press “Yes”, and your machine can connect to wifi.

Wifi Reset
If your phone cannot connect to the machine, please long press the”wifi” button for 2 seconds. After the “Beep” sound, the machine has connected to the wifi successfully. Long press the “wifi” button and the screen will be   . After the “beep” sound, the machine has connected to the wifi successfully.

Maintenance

Changing the filter

Turn counterclockwise to open the bottom cover as indicated by the bottom cover switch and take out the filter
Be sure to turn and power off the purifier before performing the following operations

Rotate counterclockwise to open and take out the nano-photocatalytic filter, and replace the HEPA H13 filter After that, install the nano-photocatalytic filter according to the original operation mode.

Install the filter back and close the bottom cover according to the original operating path. Now the replacement is complete.

Caution
When moving, make sure to stop the host and pull out the power cord plug.

Carry

  • If the bottom cover is not installed correctly, the air purifier cannot start.

Installment

  • The air inlet should be more than 20cm away from the wall and other shielding objects.

Cleaning

  • Cleaning dust on the HEPA filter is conducive to reducing the breeding of bacteria.
  • Cleaning up the dust blocking the air inlet hole is conducive to prevent the decrease of air inlet volume.
  • When not in use for a long time, please cover the air outlet to prevent dust falling into the top grille and internal fan blade surface.

Power supply
Use power cords and sockets according to the following instructions to avoid fire, electric shock or damage:

  • Do not excessively pull, twist, or bend the power cable. Otherwise, the core of the cable may be exposed or broken.
  • It must be connected to a power socket that fits the power cord plug.
  • Please don’t use power adapter of other brands
  • Be sure to disconnect the power supply before performing maintenance operations or moving the air purifier.
  • If the supply cord is damaged, it must be replaced with one purchased from its manufacturer or service department.

Use

  • If the product has abnormal sound, peculiar smell, high temperature, or irregular fan rotation, stop using it immediately.
  • Do not put fingers or foreign objects in the air inlet and outlet.
  • Do not put hair, fabric, etc. close to the item, so as not to be involved in or block the air inlet and outlet.
  • Do not sit, lean or tilt the host.
  • Do not pour liquid or throw powder and fine matter into the machine from the air outlet.

Usage limits
Do not use it under the following conditions, otherwise electric shock, fire and other damage may occur:

The air inlet hole must be far away from the open flame appliance
The air purifier must be far away from high temperature and heating appliances. please avoid combustible materials into the item.

  • Easy to dump and other unstable places. Places with high temperature, humidity and water contamination, such as bathrooms.
  • This product is not recommended for use by users with insufficient mental capacity or knowledge, including children, except under the supervision or guidance of a person responsible for their safety.

Specification

Name Intelligent air purifier Voltage DC 24V PM2.5 CADR 104.4m3/h
Model AP-D1-G Rated power 14.4W PM CCM P3
Size Φ210mm*297mm Noise 35.6dB(A)~

51.6dB(A)

| Formaldehyde CADR| 75.6m3/h
Net| 2.1kg| area of HEPA filter| ≈2.5㎡| Formaldehyde CCM| F4
App area| 25 ~ 40 m2| Formaldehyde removal efficiency| High| PM2.5 removal efficiency| High

Harmful substances

Parts Harmful substances

Pb

|

Hg

|

Cd

|

Cr(VI)

|

Br

|

As

|

PBB

|

PBDE

Plastic shell| | | | | | | |
Fan| | | | | | | |
PCB| | | | | | | |
Power adapter| | | | | | | |
HEPA filter| | | | | | | |
The composite

filter

| | | | | | | |

  • The component does not contain the substance or cannot be detected by the instrument
  • The component contains the substance but the content is below the limit specified in GB/T 26572
  • The component contains the substance and the content exceeds the limit requirements specified in GB/T 26572

The above test results are from ANTOP Laboratories

Warranty card

Thank you for buying our products
In order for you to use this product safely and satisfactorily, please read the instructions carefully before use

Warranty Record:

User name
Model____
Product ID:

Purchasing date____(mm, dd, yyyy)

Date Maintenance Maintenance man Remarks

Whole unit

  • air purifier × 1

  • Manual × 1

  • Power adapter × 1
    Product warranty card × 1

  • The composite filter × 1

Guarantee clause

Within three months from the date of the goods sold, if performance failure occurs, it can be replaced with the new one with the intact item and gift box (subject to inspection) excluding man-made damage.
All artificial damage, self-dismantling, unsealing, improper use of all external damage, not within the scope of the warranty. If the card is required for warranty, the company has the right to provide non-warranty treatment for failure to provide the card or unauthorized alteration of the card.
Warranty for one year from the date of sale, lifetime maintenance, accessories are not within the scope of warranty.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

ANTOP User Manuals

Related Manuals