JBL LIVE770NC Over-Ear Bluetooth Headphones User Guide

QUICK START GUIDE
LIVE770 NC

WHAT’S IN THE BOX

https://register.jbl.comutm_medium=US&utm_source=QSG

APP

Get even more control and personalization of your listening experience with this free app.

POWER ON & CONNECT

• To enter pairing mode again, hold for 2 seconds.

MULTI-POINT CONNECTION

CONTROLS

Tap/Press × 1
Tap/Press × 2
Tap × 3
Hold (2s)

• Enable advance controls by connecting your JBL LIVE770NC to JBL Headphones app .

AUTO PLAY/PAUSE

WIRED LISTENING MODE

VOICEAWARE

DO MORE WITH THE APP

https://storage.lscloud.harman.com/Testing/MyJBLHeadphones/QRCodeDownload/appstore/jblheadphone.html

HANDS-FREE VOICE CONTROL

| Get more done on the go. Say “Hey Google” to get started.| “Play my Workout playlist”
“Turn on noise canceling”
“Turn off ambient mode”
“What’s my schedule today?”
“Set an alarm for 7 AM”
---|---|---

Note: Only available on Android™ | Pre-set up is required

| Ask Alexa to play music, answer questions, play the news, check the weather, set alarms, control compatible smart home devices, and more.| “Alexa, play today’s hits”
“Alexa, volume up.”
“Alexa, skip this song.”
“Alexa, what’s the weather?”
“Alexa, turn off the TV.”
“Alexa, start my commute”
---|---|---

Note: Android™ 6.0 or higher is required for full access to Alexa features when using this device. Alexa isn’t available in all locations.

CHARGING

FACTORY RESET

LED BEHAVIORS

TECH SPEC

AUX mode: 20 Hz ~ 40 kHz
Impedance:| 32 ohm
Sensitivity:| 100 dB SPL@1 kHz
Maximum SPL:| 95 dB
Microphone sensitivity:| -40 dBV/Pa@1 kHz
Bluetooth version:| 5.3
Bluetooth profile version:| A2DP V1.4, HFP V1.8, AVRCP V1.6.2
Bluetooth transmitter frequency range:| 2.4 GHz – 2.4835 GHz
Bluetooth transmitter power:| ≤ 10dBm (EIRP)
Bluetooth transmitter modulation:| GFSK, π/4-DQPSK, 8DPSK
Maximum operation temperature:| 45 °C

TO PROLONG BATTERY LIFESPAN, FULLY CHARGE AT LEAST ONCE EVERY 3 MONTHS. BATTERY LIFE VARIES BY USE AND SETTINGS.
IC RF Exposure Information and Statement
The SAR limit of Canada (C) is 1.6 W/kg averaged over one gram of tissue. Device types: (IC:6132A-LIVE770NC) has also been tested against this SAR limit According to this standard, the highest SAR value reported during product certification for head use is 0.04 W / kg.
The device was tested for typical bodily operations where the product was kept 0 mm from the head. To maintain compliance with IC RF exposure requirements, use accessories that maintain a separation distance of 0mm between the user’s head and the back of the headset. The use of belt clips, holsters and similar accessories shall not contain metal parts in its assembly. Use of accessories that do not meet these requirements may not comply with IC RF exposure requirements and should be avoided.
Head operation
The device was subjected to a typical head manipulation test. In order to comply with RF exposure requirements, a minimum separation distance of 0 cm must be maintained between the user’s ear and the product (including the antenna). Head exposure that do not meet these requirements may not meet RF exposure requirements and should be avoided. Use only the supplied or approved antenna.
IC:6132A-LIVE770NC
WARNING
DO NOT ATTEMPT TO OPEN, SERVICE, OR DISASSEMBLE THE BATTERY | DO NOT SHORT CIRCUIT | MAY EXPLODE IF DISPOSED OF IN FIRE | RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE | DISPOSE OR RECYCLE USED BATTERIES ACCORDING TO THE INSTRUCTIONS

FCC ID: APILIVE770NC
IC: 6132A-LIVE770NC

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by HARMAN International Industries, Incorporated is under license. Other trademarks and trade names are those of their respective owners.

Google, Android and Google Play are trademarks of Google LLC.

Product specifications and app screens are subject to change without notice.
HP_JBL_LIVE770NC_QSG_Global_SOP_V12

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>